Building surface damage recognition based on synthetic data

To detect surface damage to buildings, it is necessary to involve workers who are at risk of industrial injuries when inspecting hard-to-reach areas of industrialpremises. Attraction of special means, such as aerial platforms, safety systems, etc. increase the financial costs with this approach. The use of unmanned aerial vehicles, coupled withneural network algorithms, can simplify this procedure. Due tothe inaccessibility, the problem of obtaining training data forneural networks arises, which can be solved by synthesizingthem in a virtual environment

Calibrating SPI-ACS/INTEGRAL for gamma-ray bursts and re-estimating energetics of GRB/GW 190425 in gamma-ray range

SPI-ACS/INTEGRAL is one of the most sensitive orbital gamma-ray detectors in energy range above 80 keV. Since 2002 it registered several thousands of gamma-ray bursts, including the bursts associated with LIGO-Virgo gravitational wave events GW 170817 and GW 190425. No dedicated in-flight calibrations were performed for SPI-ACS/INTEGRAL, complicating estimation of spectral and energetic characteristics of an event. Using data of GBM/Fermi we perform cross-calibration of SPI-ACS/INTEGRAL, based on 1032 bright GRBs registered by both experiments. We find the conversion factor between instrumental counts from SPI-ACS and energy units from GBM to be dependent on hardness of GRB spectrum (defined as the characteristic energy value, $E_{p}$) and on location of a source in spacecraft based coordinate system. We determine the corresponding analytical model to calculate the conversion factor and estimate its accuracy empirically. Sensitivity of SPI-ACS/INTEGRAL to detect gamma-ray transients is also investigated. Using the calibration we re-estimate energetics of GRB/GW 190425, detected by SPI-ACS/INTEGRAL alone. We constrain possible range of the characteristic energy $E_{p}$ and isotropic equivalent of total energy, emitted in gamma-rays $E_{iso}$ for GRB 190425, using the $E_{p,i}$ -- $E_{iso}$ (Amati) correlation. The calibration model could be applied to any transients with energy spectrum, analogous to gamma-ray bursts.Comment: 11 pages, 11 figures, Accepted to MNRAS 2023 August 3, in original form 2023 June 2

Review of new technologies used for meat identification

The present article represents an analysis of trends in development of test-systems for identification of meat. These test systems are commonly used in food production and research laboratories. The relevance of development of methods for identification of meat kinds is related not only to the food restrictions, which are practiced in some religions and related to consumption of certain types of meat, but also with the hygienic aspects of food production. Also, this research is inspired also by the acute issue of food products adulteration and the replacement of one type of meat with another one. The article considers the trends in the develop  ment of microanalysis method that use immunochromatic research, i. e. methods based on molecular biology. Also this article considers the devices that do not use chromatographic methods of analysis. Examples of the development of test systems based on various methods of analysis for the identification of meat are given below. Attention is focused on the prospects of combining these methods, including colorimetric methods for identification of meat. It is also specified that the emergence of new dyes and new enzyme systems, suitable for use in enzyme-immunoassay, can enhance the sensitivity of these test systems. It is also noted that the development of technologies associated with sorbents can contribute to a better separation of the test substrates and this way to increase the sensitivity of the test in case of small amounts of test substrate. It is also noted that the use of various types of iso  thermal amplification can reduce the analysis time necessary for meat identification. Various schemes of devices for microanalysis are given; their advantages and disadvantages are listed. An example of proteomes application for meat identification is given. It is shown that this method can also be applied in the heat treatment of meat. The prospects for the development of such devices are analyzed. It is concluded that the development of systems for microanalysis in the form of quick tests is quite relevant and promis  ing. It is indicated that theoretically in the future such analytical systems, due to the use of microfluidic technologies, will be able to combine several methods. The authors proposed to use machine-aided cognition methods to analyze data obtained from similar test systems in order to increase their sensitivity.The present article represents an analysis of trends in development of test-systems for identification of meat. These test systems are commonly used in food production and research laboratories. The relevance of development of methods for identification of meat kinds is related not only to the food restrictions, which are practiced in some religions and related to consumption of certain types of meat, but also with the hygienic aspects of food production. Also, this research is inspired also by the acute issue of food products adulteration and the replacement of one type of meat with another one. The article considers the trends in the develop  ment of microanalysis method that use immunochromatic research, i. e. methods based on molecular biology. Also this article considers the devices that do not use chromatographic methods of analysis. Examples of the development of test systems based on various methods of analysis for the identification of meat are given below. Attention is focused on the prospects of combining these methods, including colorimetric methods for identification of meat. It is also specified that the emergence of new dyes and new enzyme systems, suitable for use in enzyme-immunoassay, can enhance the sensitivity of these test systems. It is also noted that the development of technologies associated with sorbents can contribute to a better separation of the test substrates and this way to increase the sensitivity of the test in case of small amounts of test substrate. It is also noted that the use of various types of iso  thermal amplification can reduce the analysis time necessary for meat identification. Various schemes of devices for microanalysis are given; their advantages and disadvantages are listed. An example of proteomes application for meat identification is given. It is shown that this method can also be applied in the heat treatment of meat. The prospects for the development of such devices are analyzed. It is concluded that the development of systems for microanalysis in the form of quick tests is quite relevant and promis  ing. It is indicated that theoretically in the future such analytical systems, due to the use of microfluidic technologies, will be able to combine several methods. The authors proposed to use machine-aided cognition methods to analyze data obtained from similar test systems in order to increase their sensitivity

Development of high sensitive real-time PCR to detect mustard and other allergens of the family Brassicaceae in food samples

Mustard is a commonly used condiment including in production of other food products. As mustard is an allergen, it is necessary to control its presence. The development of PCR test-systems for its detection is complicated by the fact that this condiment can be made from seeds of various plant species (Brassica juncea, Brassica nigra, Sinapis alba) of the family Brassicaceae that are not closely related. This family includes other plant species such as white cabbage (Brassica oleracea) and rapeseed (Brassica napus), which can cause the allergic reaction, although seldom. In this connection, many authors use primers specific to many species of this family, including to allergens, to detect mustard. In this work, we used the similar strategy. To increase sensitivity, primers for the mitochondrial COX gene were selected. To increase PCR stability in analysis of deeply processed products, primers were selected for a region with a length of 61 base pair. In the work, the specificity and sensitivity of the developed PCR method was confirmed. Analyses of different products, including those that underwent deep technological processing, were carried out with these primers. Also, primers were selected to detect white mustard (S. alba). When analyzing products on the presence of white mustard, charac‑ teristic regional preferences were demonstrated: this species is used in manufacturing products mainly in the UK and USA

Investigation of the spectral lag - energy relation of GRBs registered by INTEGRAL

We investigated the dependence of spectral lag on energy band based on 28 bright GRBs detected by the SPI and IBIS/ISGRI instruments on the INTEGRAL observatory. It is found that for simple structured bursts or well separated pulses of multi-pulse bursts the spectral lag can be approximated by the relation t=Alog(E), where A is a positive parameter, which correlates with pulse duration. We have not found any negative lag in simple structured bursts or in well separated pulses. While investigating the time profile of the whole burst negative lag may appear due to different spectral parameters of the pulses.Comment: 6 pages, 2 figures, Proceedings of "An INTEGRAL view of the high-energy sky (the first 10 years)" the 9th INTEGRAL Workshop, October 15-19, 2012, Paris, France, in Proceedings of Science (INTEGRAL 2012), Eds. A. Goldwurm, F. Lebrun and C. Winkler, (http://pos.sissa.it/cgi-bin/reader/conf.cgi?confid=176), id 12

Extended Emission of Cosmic Gamma-Ray Bursts Detected in the SPI-ACS/INTEGRAL Experiment

We have carried out a systematic analysis of the gamma-ray bursts' (GRBs) light curves detected in the SPI-ACS experiment onboard the INTEGRAL observatory aimed to search extended emission. The emission occasionally recorded after the prompt active phase of a GRB in the form of an emission that is longer than the active phase and less intense is called the extended one. Out of the 739 brightest GRBs recorded from 2002 to 2017, extended emission has been detected in $\sim20\%$ of the individual light curves; its maximum duration reaches $\sim 10000$ s. Two different types of extended emission have been revealed. One of them is an additional component of the light curve and is described by a power law (PL) with an index $\alpha \sim -1$ close to the PL index of the afterglow in the optical and X-ray bands. The second type can be described by a steeper PL decay of the light curve typical of the active burst phase. Extended emission has also been found in the combined light curve of long GRBs in the individual curves of which no extended emission has been detected. The PL index of the extended emission in the combined light curve is $\alpha \sim -2.4$. It is most likely associated with the superposition of light curves at the active phase; its total duration is $\sim 800$ s

The effect of a heteroatom on the structure and vibrational spectra of Heteroannulated tetraphenylenes

Based on calculations by the DFT method, we have theoretically compared IR absorption and Raman spectra of tetraoxa[8]circulene (4O) and its analogs that contain sulfur (4S) and selenium (4Se) atoms. Calculations have shown that the structure of investigated molecules and observed shifts of similar vibrations in their IR and Raman spectra are interrelated. We have constructed correlation schemes of frequency shifts of normal vibrations upon passage from planar 4O circulene to its 4S and 4Se nonplanar analogs. The obtained data are of fundamental interest both from the point of view of specific selection rules and in the context of the novelty of the force field, where the conjugation of the internal and external macrocycles with heteroatoms manifests itself

METHODS OF MOLECULAR DIAGNOSTICS FOR FISH SPECIES IDENTIFICATION

The growth in demand for fish products as a result of globalization of trade caused a risks and threats of selling poor-quality and falsified fish products. This has become a great problem both for supervising agencies and for consumers.Many countries have regulations on food labelling and safety. For example, in the Russian Federation, Republic of Belarus and Republic of Kazakhstan has been passed the Technical Regulation of the Customs Union TR CU022/2011 “Food products in part of their labeling” that aims to prevent misinformation of consumers to ensuring realization of consumer rights to reliable information about food products, and Technical Regulation TR EAEU040/2016 “On safety of fish and fish products” requires indication of the zoological name of the species of the aquatic biological resource or the object of aquaculture.Fish species identification is traditionally carried out based on external morphological traits. However, it becomes impossible to identify species by ichthyological traits upon fish cutting, if the head and fins are removed, and the body is cut on pieces (especially, in case of fillets) and even more so upon technological processing. In this case, objective analytical methods of species identification are used, which are based on ELISA or PCR. However, DNA‑based methods have several advantages compared to ELISA methods and complement traditional morphological identification methods. This paper gives a wide overview of the most recent and used methods of fish species identification based on DNA analysis such as single-strand conformation polymorphism (SSCP) analysis, species-specific PCR, real-time PCR, polymerase chain reaction-restriction fragment length polymorphism analysis (PCR-RFLP), DNA barcoding, Sanger sequencing and next-generation sequencing (NGS)