Concentrations of Polychlorinated Biphenyls (PCB’s), Chlorinated Pesticides, and Heavy Metals and Other Elements in Tissues of Belugas, Delphinapterus leucas, from Cook Inlet

Tissues from Cook Inlet beluga whales, Delphinapterus leucas, that were collected as part of the Alaska Marine Mammal Tissue Archival Project were analyzed for polychlorinated biphenyls (PCB’s), chlorinated pesticides, and heavy metals and other elements. Concentrations of total PCB’s (ΣPCB’s), total DDT (ΣDDT), chlordane compounds, hexachlorobenzene (HCB), dieldrin, mirex, toxaphene, and hexachlorocyclohexane (HCH) measured in Cook Inlet beluga blubber were compared with those reported for belugas from two Arctic Alaska locations (Point Hope and Point Lay), Greenland, Arctic Canada, and the highly contaminated stock from the St. Lawrence estuary in eastern Canada. The Arctic and Cook Inlet belugas had much lower concentrations (ΣPCB’s and ΣDDT were an order of magnitude lower) than those found in animals from the St. Lawrence estuary. The Cook Inlet belugas had the lowest concentrations of all (ΣPCB’s aver-aged 1.49 ± 0.70 and 0.79 ± 0.56 mg/kg wet mass, and ΣDDT averaged 1.35 ± 0.73 and 0.59 ± 0.45 mg/kg in males and females, respectively). Concentrations in the blubber of the Cook Inlet males were significantly lower than those found in the males of the Arctic Alaska belugas (ΣPCB’s and ΣDDT were about half). The lower levels in the Cook Inlet animals might be due to differences in contaminant sources, food web differences, or different age distributions among the animals sampled. Cook Inlet males had higher mean and median concentrations than did females, a result attributable to the transfer of these compounds from mother to calf during pregnancy and during lactation. Liver concentrations of cadmium and mercury were lower in the Cook Inlet belugas (most cadmium values were <1 mg/kg and mercury values were 0.704–11.42 mg/kg wet mass), but copper levels were significantly higher in the Cook Inlet animals (3.97–123.8 mg/kg wet mass) than in Arctic Alaska animals and similar to those reported for belugas from Hudson Bay. Although total mercury levels were the lowest in the Cook Inlet population, methylmercury concentrations were similar among all three groups of the Alaska animals examined (0.34–2.11 mg/kg wet mass). As has been reported for the Point Hope and Point Lay belugas, hepatic concentrations of silver were r

Menstrual function among women exposed to polybrominated biphenyls: A follow-up prevalence study

BACKGROUND: Alteration in menstrual cycle function is suggested among rhesus monkeys and humans exposed to polybrominated biphenyls (PBBs) and structurally similar polychlorinated biphenyls (PCBs). The feedback system for menstrual cycle function potentially allows multiple pathways for disruption directly through the hypothalamic-pituitary-ovarian axis and indirectly through alternative neuroendocrine axes. METHODS: The Michigan Female Health Study was conducted during 1997–1998 among women in a cohort exposed to PBBs in 1973. This study included 337 women with self-reported menstrual cycles of 20–35 days (age range: 24–56 years). Current PBB levels were estimated by exponential decay modeling of serum PBB levels collected from 1976–1987 during enrollment in the Michigan PBB cohort. Linear regression models for menstrual cycle length and the logarithm of bleed length used estimated current PBB exposure or enrollment PBB exposure categorized in tertiles, and for the upper decile. All models were adjusted for serum PCB levels, age, body mass index, history of at least 10% weight loss in the past year, physical activity, smoking, education, and household income. RESULTS: Higher levels of physical activity were associated with shorter bleed length, and increasing age was associated with shorter cycle length. Although no overall association was found between PBB exposure and menstrual cycle characteristics, a significant interaction between PBB exposures with past year weight loss was found. Longer bleed length and shorter cycle length were associated with higher PBB exposure among women with past year weight loss. CONCLUSION: This study suggests that PBB exposure may impact ovarian function as indicated by menstrual cycle length and bleed length. However, these associations were found among the small number of women with recent weight loss suggesting either a chance finding or that mobilization of PBBs from lipid stores may be important. These results should be replicated with larger numbers of women exposed to similar lipophilic compounds

Evaluation of Performance Characteristics of Multistep Analytical Methods from Collaborative Study of Linked Samples

Following unexpectedly variable results from an international comparison study of the determination of selected polychlorinated biphenyl (PCB) congeners in shellfish tissue, a group of national metrology institutes collaboratively explored the analytical characteristics of their measurement systems using a designed study with four sample materials. This "Uncertainty Suite" consisted of a 10-congener mixture of PCBs in the relatively non-volatile iso-octane, a 5-congener mixture in relatively volatile methylene chloride, a methylene chloride extract of freeze-dried mussel (Mytilus edulis) tissue, and the (homogenized) mussel tissue itself. These samples presented the participants' measurement processes with a nested series of analytical challenges. Data evaluation tools were developed to combine and visualize measurement results for the different congeners of interest for each material and, exploiting the relationships among the samples, to help identify causes for observed changes in performance. In addition to characterizing individual measurement processes, 1) the limiting sources of measurement uncertainty were found to be chromatographic separation and signal quantification in a natural matrix, 2) the achievable among-participant measurement accuracy for PCB calibration solutions is appr. 1.9 % over the mass fraction range from 40 ng/g to 500 ng/g, and 3) the achievable among-participant measurement precision for the determination of PCB congeners in mussel tissue at levels above 0.5 ng/g mass fraction is appr. 5,4%.JRC.D.8-Food safety and qualit

Pressurized Liquid Extraction of Diesel and Air Particulate Standard Reference Materials: Effect of Extraction Temperature and Pressure

Four particulate matter Standard Reference Materials (SRMs) available from the National Institute of Standards and Technology (NIST) were used to evaluate the effect of solvent, number of static cycles and static times, pressure, and temperature when using pressurized liquid extraction (PLE) for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitrated-PAHs. The four materials used in the study were SRM 1648a Urban Particulate Matter, SRM 1649b Urban Dust, SRM 1650b Diesel Particulate Matter, and SRM 2975 Diesel Particulate Matter (Industrial Forklift). The results from the study indicate that the choice of solvent, dichloromethane compared to toluene and toluene/methanol mixtures, had little effect on the extraction efficiency. With three to five extraction cycles, increasing the extraction time for each cycle from 5 to 30 min had no significant effect on the extraction efficiency. The differences in extraction efficiency were not significant (with over 95% of the differences being <10%) when the pressure was increased from 13.8 to 20.7 MPa. The largest increase in extraction efficiency occurred for selected PAHs when the temperature of extraction was increased from 100 to 200 °C. At 200 °C naphthalene, biphenyl, fluorene, dibenzothiophene, and anthracene show substantially higher mass fractions (>30%) than when extracted at 100 °C in all the SRMs studied. For SRM 2975, large increases (>100%) are also observed for some other PAHs including benz­[<i>a</i>]­anthracene, benzo­[<i>k</i>]­fluoranthene, benzo­[<i>e</i>]­pyrene, benzo­[<i>a</i>]­pyrene, benzo­[<i>ghi</i>]­perylene, and benzo­[<i>b</i>]­chrysene when extracted at the higher temperatures; however, similar trends were not observed for the other diesel particulate sample, SRM 1650b. The results are discussed in relation to the use of the SRMs for evaluating analytical methods