The Meniscus-Guided Deposition of Semiconducting Polymers

The electronic devices that play a vital role in our daily life are primarily based on silicon and are thus rigid, opaque, and relatively heavy. However, new electronics relying on polymer semiconductors are opening up new application spaces like stretchable and self-healing sensors and devices, and these can facilitate the integration of such devices into our homes, our clothing, and even our bodies. While there has been tremendous interest in such technologies, the widespread adoption of these organic electronics requires low-cost manufacturing techniques. Fortunately, the realization of organic electronics can take inspiration from a technology developed since the beginning of the Common Era: printing. This review addresses the critical issues and considerations in the printing methods for organic electronics, outlines the fundamental fluid mechanics, polymer physics, and deposition parameters involved in the fabrication process, and provides future research directions for the next generation of printed polymer electronics

Understanding the selective etching of electrodeposited ZnO nanorods

ZnO nanotubes were prepared by selective dissolution of electrodeposited nanorods. The effect of solution pH, rod morphology, and chloride ion concentration on the dissolution mechanism was studied. The selective etching was rationalized in terms of the surface energy of the different ZnO crystal faces and reactant diffusion. The nanorod diameter and chloride concentration are the most influential parameters on the dissolution mechanism because they control homogeneous dissolution or selective etching of the (110) and (002) surfaces. Bulk solution pH only has an effect on the rate of dissolution. By accurate control of the dissolution process, the nanomorphology can be tailored, and the formation of rods with a thin diameter (10-20 nm), cavity, or ultra-thin-walled tubes (2-5 nm) can be achieved

Correlating photovoltaic properties of PTB7-Th:PC71BM blend to photophysics and microstructure as a function of thermal annealing

Selective optimisation of light harvesting materials and interface properties has brought breakthroughs in power conversion efficiency (11–12%) of organic photovoltaics (OPVs). However to translate this promising efficiency to economically viable applications, long term stability is a fundamental requirement. A number of degradation pathways, both extrinsic and intrinsic, reduce the long term stability of OPVs. Here, the photovoltaic properties of a highly efficient bulk heterojunction PTB7-Th:PC71BM blend were investigated as a function of ex situ thermal annealing. The changes in charge generation, separation, and transport due to thermal annealing were measured and related to changes in the microstructure and photovoltaic performance. A 30% drop in the power conversion efficiency of PTB7-Th:PC71BM blends upon thermal annealing at 150 °C was identified as mainly due to morphological instability induced by strong phase separation of donor and acceptor molecules of the blend films. Based on the insight gained from these investigations, enhanced thermal stability was demonstrated by replacing the PC71BM fullerene acceptor with a non-fullerene acceptor ITIC, for which power conversion efficiency dropped only by 9% upon thermal annealing at 150 °C

Size-Dependent Lattice Structure and Confinement Properties in CsPbI₃ Perovskite Nanocrystals: Negative Surface Energy for Stabilization

CsPbI₃ nanocrystals with narrow size distributions were prepared to study the size-dependent properties. The nanocrystals adopt the perovskite (over the nonperovskite orthorhombic) structure with improved stability over thin-film materials. Among the perovskite phases (cubic α, tetragonal β, and orthorhombic γ), the samples are characterized by the γ phase, rather than α, but may have a size-dependent average tilting between adjacent octahedra. Size-dependent lattice constants systematically vary 3% across the size range, with unit cell volume increasing linearly with the inverse of size to 2.1% for the smallest size. We estimate the surface energy to be from −3.0 to −5.1 eV nm⁻² for ligated CsPbI₃ nanocrystals. Moreover, the size-dependent bandgap is best described using a nonparabolic intermediate confinement model. We experimentally determine the bulk bandgap, effective mass, and exciton binding energy, concluding with variations from the bulk α-phase values. This provides a robust route to understanding γ-phase properties of CsPbI₃

Tuning the bandgap of Cs2AgBiBr6 through dilute tin alloying.

The promise of lead halide hybrid perovskites for optoelectronic applications makes finding less-toxic alternatives a priority. The double perovskite Cs2AgBiBr6 (1) represents one such alternative, offering long carrier lifetimes and greater stability under ambient conditions. However, the large and indirect 1.95 eV bandgap hinders its potential as a solar absorber. Here we report that alloying crystals of 1 with up to 1 atom% Sn results in a bandgap reduction of up to ca. 0.5 eV while maintaining low toxicity. Crystals can be alloyed with up to 1 atom% Sn and the predominant substitution pathway appears to be a ∼2 : 1 substitution of Sn2+ and Sn4+ for Ag+ and Bi3+, respectively, with Ag+ vacancies providing charge compensation. Spincoated films of 1 accommodate a higher Sn loading, up to 4 atom% Sn, where we see mostly Sn2+ substitution for both Ag+ and Bi3+. Density functional theory (DFT) calculations ascribe the bandgap redshift to the introduction of Sn impurity bands below the conduction band minimum of the host lattice. Using optical absorption spectroscopy, photothermal deflection spectroscopy, X-ray absorption spectroscopy, 119Sn NMR, redox titration, single-crystal and powder X-ray diffraction, multiple elemental analysis and imaging techniques, and DFT calculations, we provide a detailed analysis of the Sn content and oxidation state, dominant substitution sites, and charge-compensating defects in Sn-alloyed Cs2AgBiBr6 (1:Sn) crystals and films. An understanding of heterovalent alloying in halide double perovskites opens the door to a wider breadth of potential alloying agents for manipulating their band structures in a predictable manner

Structural and spectral dynamics of single-crystalline Ruddlesden-Popper phase halide perovskite blue light-emitting diodes.

Achieving perovskite-based high-color purity blue-emitting light-emitting diodes (LEDs) is still challenging. Here, we report successful synthesis of a series of blue-emissive two-dimensional Ruddlesden-Popper phase single crystals and their high-color purity blue-emitting LED demonstrations. Although this approach successfully achieves a series of bandgap emissions based on the different layer thicknesses, it still suffers from a conventional temperature-induced device degradation mechanism during high-voltage operations. To understand the underlying mechanism, we further elucidate temperature-induced device degradation by investigating the crystal structural and spectral evolution dynamics via in situ temperature-dependent single-crystal x-ray diffraction, photoluminescence (PL) characterization, and density functional theory calculation. The PL peak becomes asymmetrically broadened with a marked intensity decay, as temperature increases owing to [PbBr6]4- octahedra tilting and the organic chain disordering, which results in bandgap decrease. This study indicates that careful heat management under LED operation is a key factor to maintain the sharp and intense emission