Antimatter propulsion, status and prospects

The use of advanced propulsion techniques must be considered if the currently envisioned launch date of the manned Mars mission were delayed until 2020 or later. Within the next thirty years, technological advances may allow such methods as beaming power to the ship, inertial-confinement fusion, or mass-conversion of antiprotons to become feasible. A propulsion system with an ISP of around 5000 s would allow the currently envisioned mission module to fly to Mars in 3 months and would require about one million pounds to be assembled in Earth orbit. Of the possible methods to achieve this, the antiproton mass-conversion reaction offers the highest potential, the greatest problems, and the most fascination. Increasing the production rates of antiprotons is a high priority task at facilities around the world. The application of antiprotons to propulsion requires the coupling of the energy released in the mass-conversion reaction to thrust-producing mechanisms. Recent proposals entail using the antiprotons to produce inertial confinement fusion or to produce negative muons which can catalyze fusion. By increasing the energy released per antiproton, the effective cost, (dollars/joule) can be reduced. These proposals and other areas of research can be investigated now. These short term results will be important in assessing the long range feasibility of an antiproton powered engine

Resolved Spectroscopy of the Narrow-Line Region in NGC 1068: Kinematics of the Ionized Gas

We have determined the radial velocities of the [O III] emitting gas in the inner narrow-line region (NLR) of the Seyfert 2 galaxy NGC 1068, along a slit at position angle of 202 degrees, from STIS observations at a spatial resolution of 0.1 arcsec and a spectral resolving power of approximately 1000. We use these data to investigate the kinematics of the NLR within 6 arcsec (430 pc) of the nucleus. The emission-line knots show evidence for radial acceleration, to a projected angular distance of 1.7 arcsec in most cases, followed by deceleration that approaches the systemic velocity at a projected distance of about 4 arcsec. We find that a simple kinematic model of biconical radial outflow can match the general trend of observed radial velocities. In this model, the emitting material is evacuated along the bicone axis, and the axis is inclined 5 degrees out of the plane of the sky. The acceleration of the emission-line clouds provides support for dynamical models that invoke radiation and/or wind pressure. We suggest that the deceleration of the clouds is due to their collision with a patchy and anistropically distributed ambient medium.Comment: 18 pages, Latex, includes 3 figures in postscript, to appear in the Astrophysical Journal Letter

Crowding-induced hybridization of single DNA hairpins

It is clear that a crowded environment influences the structure, dynamics, and interactions of biological molecules, but the complexity of this phenomenon demands the development of new experimental and theoretical approaches. Here we use two complementary single-molecule FRET techniques to show that the kinetics of DNA base pairing and unpairing, which are fundamental to both the biological role of DNA and its technological applications, are strongly modulated by a crowded environment. We directly observed single DNA hairpins, which are excellent model systems for studying hybridization, either freely diffusing in solution or immobilized on a surface under crowding conditions. The hairpins followed two-state folding dynamics with a closing rate increasing by 4-fold and the opening rate decreasing 2-fold, for only modest concentrations of crowder [10% (w/w) polyethylene glycol (PEG)]. These experiments serve both to unambiguously highlight the impact of a crowded environment on a fundamental biological process, DNA base pairing, and to illustrate the benefits of single-molecule approaches to probing the structure and dynamics of complex biomolecular systems

Reliability of a Shuttle reaction timer

Reaction, movement, and task times refer to the times needed to initially respond to a stimulus, make the specific movement, and complete the entire task. This study evaluated the reliability of a simple reaction timer designed to mimic a Space Shuttle task (turning on an overhead switch)

Visual control of flight speed in Drosophila melanogaster

Flight control in insects depends on self-induced image motion (optic flow), which the visual system must process to generate appropriate corrective steering maneuvers. Classic experiments in tethered insects applied rigorous system identification techniques for the analysis of turning reactions in the presence of rotating pattern stimuli delivered in open-loop. However, the functional relevance of these measurements for visual free-flight control remains equivocal due to the largely unknown effects of the highly constrained experimental conditions. To perform a systems analysis of the visual flight speed response under free-flight conditions, we implemented a `one-parameter open-loop' paradigm using `TrackFly' in a wind tunnel equipped with real-time tracking and virtual reality display technology. Upwind flying flies were stimulated with sine gratings of varying temporal and spatial frequencies, and the resulting speed responses were measured from the resulting flight speed reactions. To control flight speed, the visual system of the fruit fly extracts linear pattern velocity robustly over a broad range of spatio–temporal frequencies. The speed signal is used for a proportional control of flight speed within locomotor limits. The extraction of pattern velocity over a broad spatio–temporal frequency range may require more sophisticated motion processing mechanisms than those identified in flies so far. In Drosophila, the neuromotor pathways underlying flight speed control may be suitably explored by applying advanced genetic techniques, for which our data can serve as a baseline. Finally, the high-level control principles identified in the fly can be meaningfully transferred into a robotic context, such as for the robust and efficient control of autonomous flying micro air vehicles

Relationships between land use and nitrogen and phosphorus in New Zealand lakes

Developing policies to address lake eutrophication requires an understanding of the relative contribution of different nutrient sources and of how lake and catchment characteristics interact to mediate the source–receptor pathway. We analysed total nitrogen (TN) and total phosphorus (TP) data for 101 New Zealand lakes and related these to land use and edaphic sources of phosphorus (P). We then analysed a sub-sample of lakes in agricultural catchments to investigate how lake and catchment variables influence the relationship between land use and in-lake nutrients. Following correction for the effect of co-variation amongst predictor variables, high producing grassland (intensive pasture) was the best predictor of TN and TP, accounting for 38.6% and 41.0% of variation, respectively. Exotic forestry and urban area accounted for a further 18.8% and 3.6% of variation in TP and TN, respectively. Soil P (representing naturally-occurring edaphic P) was negatively correlated with TP, owing to the confounding effect of pastoral land use. Lake and catchment morphology (zmax and lake : catchment area) and catchment connectivity (lake order) mediated the relationship between intensive pasture and in-lake nutrients. Mitigating eutrophication in New Zealand lakes requires action to reduce nutrient export from intensive pasture and quantifying P export from plantation forestry requires further consideration

Pushdown Control-Flow Analysis for Free

Traditional control-flow analysis (CFA) for higher-order languages, whether implemented by constraint-solving or abstract interpretation, introduces spurious connections between callers and callees. Two distinct invocations of a function will necessarily pollute one another's return-flow. Recently, three distinct approaches have been published which provide perfect call-stack precision in a computable manner: CFA2, PDCFA, and AAC. Unfortunately, CFA2 and PDCFA are difficult to implement and require significant engineering effort. Furthermore, all three are computationally expensive; for a monovariant analysis, CFA2 is in $O(2^n)$, PDCFA is in $O(n^6)$, and AAC is in $O(n^9 log n)$. In this paper, we describe a new technique that builds on these but is both straightforward to implement and computationally inexpensive. The crucial insight is an unusual state-dependent allocation strategy for the addresses of continuation. Our technique imposes only a constant-factor overhead on the underlying analysis and, with monovariance, costs only O(n3) in the worst case. This paper presents the intuitions behind this development, a proof of the precision of this analysis, and benchmarks demonstrating its efficacy.Comment: in Proceedings of the 43rd Annual ACM SIGPLAN-SIGACT Symposium on Principles of Programming Languages, 201

Evaluation of noninvasive cardiac output methods during exercise

Noninvasive techniques to estimate cardiac output (Qc) will be used during future space flight. This retrospective literature survey compared the Qc techniques of carbon dioxide rebreathing (CO2-R), CO2 single breath (CO2-S), Doppler (DOP), impedance (IM), and inert gas (IG: acetylene or nitrous oxide) to direct (DIR) assessments measured at rest and during exercise

Structural instability in an autophosphorylating kinase switch

We analyse a simple kinase model that exhibits bistability when there is no protein turnover, and show analytically that the property of being bistable is not necessarily conserved when degradation and synthesis of the kinase are taken into account

Synchrotron Mössbauer spectroscopic study of ferropericlase at high pressures and temperatures

The electronic spin state of Fe^(2+) in ferropericlase, (Mg_(0.75)Fe_(0.25))O, transitions from a high-spin (spin unpaired) to low-spin (spin paired) state within the Earth’s mid-lower mantle region. To better understand the local electronic environment of high-spin Fe^(2+) ions in ferropericlase near the transition, we obtained synchrotron Mössbauer spectra (SMS) of (Mg_(0.75),Fe_(0.25))O in externally heated and laser-heated diamond anvil cells at relevant high pressures and temperatures. Results show that the quadrupole splitting (QS) of the dominant high-spin Fe^(2+) site decreases with increasing temperature at static high pressure. The QS values at constant pressure are fitted to a temperature-dependent Boltzmann distribution model, which permits estimation of the crystal-field splitting energy (Δ_3) between the d_(xy_ and d_(xz) or d_(zy) orbitals of the t_(2g) states in a distorted octahedral Fe^(2+) site. The derived Δ_3 increases from approximately 36 meV at 1 GPa to 95 meV at 40 GPa, revealing that both high pressure and high temperature have significant effects on the 3d electronic shells of Fe^(2+) in ferropericlase. The SMS spectra collected from the laser-heated diamond cells within the time window of 146 ns also indicate that QS significantly decreases at very high temperatures. A larger splitting of the energy levels at high temperatures and pressures should broaden the spin crossover in ferropericlase because the degeneracy of energy levels is partially lifted. Our results provide information on the hyperfine parameters and crystal-field splitting energy of high-spin Fe^(2+) in ferropericlase at high pressures and temperatures, relevant to the electronic structure of iron in oxides in the deep lower mantle