RF transparent, energy absorbing, structural elements, phase II Final report, 5 Jun. 1963 - 16 Mar. 1964

Energy absorbing, structural elements having high specific energy absorption and low dielectric constant and loss tangent - space vehicle applicatio

Laser velocimeter systems analysis applied to a flow survey above a stalled wing

A laser velocimeter operating in the backscatter mode was used to survey the flow above a stalled wing. Polarization was used to separate the two orthogonal velocity components of the fringe-type laser velocimeter, and digital counters were used for data processing. The velocities of the kerosene seed particles were measured with less than 2 percent uncertainty. The particle velocity measurements were collected into histograms. The flow field survey was carried out above an aspect-ratio-8 stalled wing with an NACA 0012 section. The angle of attack was 19.5 deg, the Mach number was 0.49, and the Reynolds number was 1,400,000. The flow field was characterized by the periodic shedding of discrete vortices from near the crest of the airfoil

A laser velocimeter flow survey above a stalled wing

A laser velocimeter operating in the backscatter mode was used to survey the flow about a stalled wing installed in the Langley V/STOL tunnel. Mean velocities and magnitudes of velocity fluctuations were calculated from measurements of two orthogonal components of velocity. Free shear mixing layers above and below a large separated flow region were defined. Velocity power spectra were calculated at two points in the flow field. The flow-field survey was carried out about a rectangular aspect-ratio-8 wing with an airfoil section. The wing angle of attack was 19.4 deg, the Mach number was 0.148, and the nominal Reynolds number was 1 x 1 million

Correlation of laser velocimeter measurements over a wing with results of two prediction techniques

The flow field at the center line of an unswept wing with an aspect ratio of eight was determined using a two dimensional viscous flow prediction technique for the flow field calculation, and a three dimensional potential flow panel method to evaluate the degree of two dimensionality achieved at the wing center line. The analysis was made to provide an acceptable reference for comparison with velocity measurements obtained from a fringe type laser velocimeter optics systems operating in the backscatter mode in the Langley V/STOL tunnel. Good agreement between laser velocimeter measurements and theoretical results indicate that both methods provide a true representation of the velocity field about the wing at angles of attack of 0.6 and 4.75 deg

AN EVALUATION OF THE 1981 FARM PROGRAM FOR CROPS: IMPLICATIONS FOR THE 1985 FARM BILL

Agricultural and Food Policy,

Properties of HxTaS2

The preparation of Hx TaS2 (0 \u3c x \u3c 0.87) is described. The compounds are only marginally stable at room temperature, slowly evolving H2S and H2 (and possibly Hp in air). Magnetic susceptibility data show that a low temperature transformation in 2H ... TaS2 (at so•K) is suppressed with the addition of hydrogen, and· at the same time the superconducting transition temperature T c rises from 0.8 to ~4.2•K at x = 0.11. Heat capacity measurements near this concentration show the superconductivity to be a bulk effect. Finally, by correlation of this data with susceptibility and T c measurements in other intercalation compounds, we suggest that the rise of T c (at low electron transfer) is due to suppression of the low temperature transformation and not due to an excitonic mechanism of superconductivity

Children's construction task performance and spatial ability: controlling task complexity and predicting mathematics performance.

This paper presents a methodology to control construction task complexity and examined the relationships between construction performance and spatial and mathematical abilities in children. The study included three groups of children (N = 96); ages 7-8, 10-11, and 13-14 years. Each group constructed seven pre-specified objects. The study replicated and extended previous findings that indicated that the extent of component symmetry and variety, and the number of components for each object and available for selection, significantly predicted construction task difficulty. Results showed that this methodology is a valid and reliable technique for assessing and predicting construction play task difficulty. Furthermore, construction play performance predicted mathematical attainment independently of spatial ability