Transverse Observables and Mass Determination at Hadron Colliders

I consider the two-body decay of a particle at a hadron collider into a visible and an invisible particle, generalizing $W \to e \nu$, where the masses of the decaying particle and the invisible decay particle are, {\em a priori}, unknown. I prove that the transverse mass, when maximized over possible kinematic configurations, can be used to determine both of the unknown masses. I argue that the proof can be generalized to cover cases such as decays of pair-produced superpartners to the lightest, stable superpartner at the Large Hadron Collider.Comment: 4 pages; version published in JHE

A lens-coupled scintillation counter in cryogenic environment

In this work we present an elegant solution for a scintillation counter to be integrated into a cryogenic system. Its distinguishing feature is the absence of a continuous light guide coupling the scintillation and the photodetector parts, operating at cryogenic and room temperatures respectively. The prototype detector consists of a plastic scintillator with glued-in wavelength-shifting fiber located inside a cryostat, a Geiger-mode Avalanche Photodiode (G-APD) outside the cryostat, and a lens system guiding the scintillation light re-emitted by the fiber to the G-APD through optical windows in the cryostat shields. With a 0.8mm diameter multiclad fiber and a 1mm active area G-APD the coupling efficiency of the "lens light guide" is about 50%. A reliable performance of the detector down to 3K is demonstrated.Comment: 14 pages, 11 figure

Fracture driven by a Thermal Gradient

Motivated by recent experiments by Yuse and Sano (Nature, 362, 329 (1993)), we propose a discrete model of linear springs for studying fracture in thin and elastically isotropic brittle films. The method enables us to draw a map of the stresses in the material. Cracks generated by the model, imposing a moving thermal gradient in the material, can branch or wiggle depending on the driving parameters. The results may be used to compare with other recent theoretical work, or to design future experiments.Comment: RevTeX file (9 pages) and 5 postscript figure

Epidemiology of Malaria in an Area Prepared for Clinical Trials in Korogwe, North-eastern Tanzania.

Site preparation is a pre-requesite in conducting malaria vaccines trials. This study was conducted in 12 villages to determine malariometric indices and associated risk factors, during long and short rainy seasons, in an area with varying malaria transmission intensities in Korogwe district, Tanzania. Four villages had passive case detection (PCD) of fever system using village health workers. Four malariometric cross-sectional surveys were conducted between November 2005 and May 2007 among individuals aged 0-19 years, living in lowland urban, lowland rural and highland strata. A total of 10,766 blood samples were collected for malaria parasite diagnosis and anaemia estimation. Blood smears were stained with Giemsa while haemoglobin level was measured by HaemoCue. Socio-economic data were collected between Jan-Apr 2006. Adjusting for the effect of age, the risk of Plasmodium falciparum parasitaemia was significantly lower in both lowland urban, (OR = 0.26; 95%CI: 0.23-0.29, p < 0.001) and highlands, (OR = 0.21; 95%CI: 0.17-0.25, p < 0.001) compared to lowland rural. Individuals aged 6-9 years in the lowland rural and 4-19 years in both lowland urban and highlands had the highest parasite prevalence, whilst children below five years in all strata had the highest parasite density. Prevalence of splenomegaly and gametocyte were also lower in both lowland urban and highlands than in lowland rural. Anaemia (Hb <11 g/dl) prevalence was lowest in the lowland urban. Availability of PCD and higher socio-economic status (SES) were associated with reduced malaria and anaemia prevalence. Higher SES and use of bed nets in the lowland urban could be the important factors for low malaria infections in this stratum. Results obtained here were used together with those from PCD and DSS in selecting a village for Phase 1b MSP3 vaccine trial, which was conducted in the study area in year 2008

Direct mode summation for the Casimir energy of a solid ball

The Casimir energy of a solid ball placed in an infinite medium is calculated by a direct frequency summation using the contour integration. It is assumed that the permittivity and permeability of the ball and medium satisfy the condition $\epsilon_1 \mu_1=\epsilon_2\mu_2$. Upon deriving the general expression for the Casimir energy, a dilute compact ball is considered $(\epsilon_1 -\epsilon_2)^2/(\epsilon_1+\epsilon_2)^2\ll 1$. In this case the calculations are carried out which are of the first order in $\xi ^2$ and take account of the five terms in the Debye expansion of the Bessel functions involved. The implication of the obtained results to the attempts of explaining the sonoluminescence via the Casimir effect is shortly discussed.Comment: REVTeX, 7 pages, no figures and tables, treatment of a dilute dielectric ball is revised, new references are adde

Challenges in the Analysis of Historic Concrete:Understanding the Limitations of Techniques, the Variability of the Material and the Importance of Representative Samples

The number of historically-significant concrete structures which require conservation and repair is ever-increasing. The use of unsuitable proprietary materials has led to poor quality repairs of historically-significant structures in the United Kingdom, some of which have resulted in damage to the historic character of the structure and accelerated deterioration of the substrate. As a result, the approach to the repair of historic concrete structures has shifted from the use of mass-produced proprietary repair materials to purpose-made ‘like-for-like’ replacements which, theoretically, have similar mechanical and aesthetic properties. In order to create like-for-like repair materials, the original mix proportions and water/cement (w/c) ratio of the substrate have to be established. However, there are concerns regarding the accuracy of existing techniques and standards used for the analyses of hardened concrete. Furthermore, due to a lack of available material, analyses are often carried out on samples that are much smaller than the minimum requirement for a representative sample, or from areas which are not representative. This paper discusses these issues and hopes to provide information to conservators and analysts on the limitations of techniques, the variability of the material and the importance of representative samples

Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy

The influence of nanosecond laser pulses applied by laser shock peening without absorbent coating (LSPwC) with a Q-switched Nd:YAG laser operating at a wavelength of λ = 1064 nm on 6082-T651 Al alloy has been investigated. The first portion of the present study assesses laser shock peening effect at two pulse densities on three-dimensional (3D) surface topography characteristics. In the second part of the study, the peening effect on surface texture orientation and micro-structure modification, i.e. the effect of surface craters due to plasma and shock waves, were investigated in both longitudinal (L) and transverse (T) directions of the laser-beam movement. In the final portion of the study, the changes of mechanical properties were evaluated with a residual stress profile and Vickers micro-hardness through depth variation in the near surface layer, whereas factorial design with a response surface methodology (RSM) was applied. The surface topographic and micro-structural effect of laser shock peening were characterised with optical microscopy, InfiniteFocus® microscopy and scanning electron microscopy (SEM). Residual stress evaluation based on a hole-drilling integral method confirmed higher compression at the near surface layer (33 μm) in the transverse direction (σmin) of laser-beam movement, i.e. − 407 ± 81 MPa and − 346 ± 124 MPa, after 900 and 2500 pulses/cm2, respectively. Moreover, RSM analysis of micro-hardness through depth distribution confirmed an increase at both pulse densities, whereas LSPwC-generated shock waves showed the impact effect of up to 800 μm below the surface. Furthermore, ANOVA results confirmed the insignificant influence of LSPwC treatment direction on micro-hardness distribution indicating essentially homogeneous conditions, in both L and T directions