19 research outputs found

    Origin of Magnetically Induced Optical Transmission of Magnetic Nanocomposite Films

    No full text
    Herein, we present an investigation on the origin of the magnetically induced optical transmission of composite films comprised of polydimethylsiloxane and magnetic nanofillers via experiment and simulation. Structured and unstructured films were used in the study, which were fabricated with and without magnetic fields, respectively. Altered optical transmittance was observed from both types of films when they were subjected to an external magnetic field. Numerical analyses were performed to investigate the effect of the particle movement under magnetic field and the film magnetostriction on the film optical transmittance. The simulation results show that the changed light transmission under magnetic field is mainly due to a variation in the film thickness resulting from the film magnetostriction. The ellipsometric analysis results confirm the altered film thickness in response to the external magnetic field, and the measurements of the film magnetostrictive stresses validate that there is magnetostriction in the magnetic composite films. Additionally, it is indicated that there might be some relationship between the magnetically induced optical transmission and the film magnetostrictive stress under certain conditions

    Curved Film Microstructure Arrays Fabricated via Mechanical Stretching

    No full text
    We report on curved film microstructure arrays fabricated through polydimethylsiloxane (PDMS) film buckling induced by mechanical stretching. In the process of the microstructure preparation, a PDMA film is glued on a bidirectionally prestretched PDMS sheet that has a square distributed hole array on its surface. After releasing the prestrain, the film microstructure array is created spontaneously. The fabricated microstructures possess a spherical surface and demonstrate very good uniformity. The film microstructure arrays can serve as microlens arrays with a focal length of 1010 ÎĽm. The microstructure formation mechanism is investigated via theoretical analysis and numerical simulation. The simulation results agree well with the experimental results. The prestrain applied by mechanical stretching during the fabrication has an important effect on the shape of the resulting film microstructures. The microstructure geometry can be easily tuned through controlling the applied prestrain

    Curved Film Microstructure Arrays Fabricated via Mechanical Stretching

    No full text
    We report on curved film microstructure arrays fabricated through polydimethylsiloxane (PDMS) film buckling induced by mechanical stretching. In the process of the microstructure preparation, a PDMA film is glued on a bidirectionally prestretched PDMS sheet that has a square distributed hole array on its surface. After releasing the prestrain, the film microstructure array is created spontaneously. The fabricated microstructures possess a spherical surface and demonstrate very good uniformity. The film microstructure arrays can serve as microlens arrays with a focal length of 1010 ÎĽm. The microstructure formation mechanism is investigated via theoretical analysis and numerical simulation. The simulation results agree well with the experimental results. The prestrain applied by mechanical stretching during the fabrication has an important effect on the shape of the resulting film microstructures. The microstructure geometry can be easily tuned through controlling the applied prestrain

    Nano-octahedral bimetallic Fe/Eu-MOF preparation and dual model sensing of serum alkaline phosphatase (ALP) based on its peroxidase-like property and fluorescence

    No full text
    Herein a nano-scale bimetallic Fe/Eu-MOF with a regular octahedral structure was synthesized for the first time. The synthesized Fe/Eu-MOF has both peroxidase-like activity and fluorescence properties. Fe/Eu-MOF can catalyze H2O2 to oxidize the chromogenic substrate TMB to produce blue oxTMB, which has ultraviolet absorption at 652 nm. Unexpectedly, the generated oxTMB can effectively quench the fluorescence of the catalyst Fe/Eu-MOF at 450 nm. The quenching mechanism is mainly the internal filtration effect (IFE), accompanied by static quenching (SQE), Förster resonance energy transfer (FRET) and photoelectron transfer (PET). Fe/Eu-MOF has a high affinity for sodium pyrophosphate (PPi). PPi can be adsorbed to the surface of Fe/Eu-MOF, destroying the structure of Fe/Eu-MOF and inhibiting its catalytic activity, resulting in a decrease in UV absorbance and the decline of fluorescence quenching. In contrast, phosphoric acid (Pi) has almost no effect on the reaction system. Alkaline phosphatase (ALP) can catalyze the hydrolysis of PPi to Pi, thereby reducing the inhibitory effect of PPi. Based on this, we successfully constructed a dual-mode ALP sensor with high selectivity. The linear ranges based on the 652 nm absorption or the fluorescence detection are from 1 to 200 U/L, and the detection limits are 0.6 for the absorption method and 0.9 U/L for the fluorescence method, respectively

    Excellent Infrared Nonlinear Optical Crystals BaMO(IO3)5 (M = V, Ta) Predicted by First Principle Calculations

    No full text
    Two nonlinear optical crystals, BaVO(IO3)5 and BaTaO(IO3)5, are designed by substituting Nb with V and Ta, respectively, in BaNbO(IO3)5, which is itself a recently synthesized infrared nonlinear optical (NLO) material. The designs of BaVO(IO3)5 and BaTaO(IO3)5 from BaNbO(IO3)5 are based on the following motivation: BaVO(IO3)5 should have a larger second-harmonic generation (SHG) coefficient than BaNbO(IO3)5, as V will result in a stronger second-order Jahn-Teller effect than Nb due to its smaller ion radius; at the same time, BaTaO(IO3)5 should have a larger laser-damage threshold, due to the fact that Ta has a smaller electronegativity leading to a greater band-gap. Established on reliable first-principle calculations, it is demonstrated that BaVO(IO3)5 has a much larger SHG coefficient than BaNbO(IO3)5 (23.42 × 10−9 vs. 18.66 × 10−9 esu); and BaTaO(IO3)5 has a significantly greater band-gap than BaNbO(IO3)5 (4.20 vs. 3.55 eV). Meanwhile, the absorption spectra and birefringences of both BaVO(IO3)5 and BaTaO(IO3)5 are acceptable for practice, suggesting that these two crystals can both be expected to be excellent infrared NLO materials

    Region-Specific Biomarkers and Their Mechanisms in the Treatment of Lung Adenocarcinoma: A Study of <i>Panax quinquefolius</i> from Wendeng, China

    No full text
    Panax quinquefolius, a popular medicinal herb, has been cultivated in China for many years. In this work, the region-specific profiles of metabolites in P. quinquefolius from Wendeng was investigated using liquid-chromatography–quadrupole–time-of-flight-(LC–Q–TOF)-based metabolomics analysis. The three most abundant biomarkers, identified as ginsenoside Rb3, notoginsenoside R1, and ginsenoside Rc, were the representative chemical components employed in the network pharmacology analysis. In addition, molecular docking and western blotting analyses revealed that the three compounds were effective binding ligands with Hsp90α, resulting in the inactivation of SRC and PI3K kinase, which eventually led to the inactivation of the Akt and ERK pathways and lung cancer suppression. The outcomes obtained herein demonstrated the intriguing chemical characteristics and potential functional activities of P. quinquefolius from Wendeng

    Aerobic C–C Bond Cleavage of Allylic Alcohols via Co-Catalyzed Hydrogen Atom Transfer

    No full text
    A simple, efficient method has been developed for the CoIII–H-catalyzed aerobic C–C bond cleavage of tertiary allylic alcohols to access ketones. This novel approach presents excellent chemoselectivity, good functional group compatibility, and high yields. This reaction occurs through a HAT-initiated peroxide intermediate, and an adjacent glycol-type diradical fragmentation process is recommended

    Cell primitive-based biomimetic nanomaterials for Alzheimer's disease targeting and therapy

    No full text
    Alzheimer's disease (AD) is a progressive neurodegenerative disorder, which is not just confined to the older population. Although developments have been made in AD treatment, various limitations remain to be addressed. These are partly contributed by biological hurdles, such as the blood–brain barrier and peripheral side effects, as well as by lack of carriers that can efficiently deliver the therapeutics to the brain while preserving their therapeutic efficacy. The increasing AD prevalence and the unavailability of effective treatments have encouraged researchers to develop improved, convenient, and affordable therapies. Functional materials based on primitive cells and nanotechnology are emerging as attractive therapeutics in AD treatment. Cell primitives possess distinct biological functions, including long-term circulation, lesion site targeting, and immune suppression. This review summarizes the challenges in the delivery of AD drugs and recent advances in cell primitive–based materials for AD treatment. Various cell primitives, such as cells, extracellular vesicles, and cell membranes, are presented together with their distinctive biological functions and construction strategies. Moreover, future research directions are discussed on the basis of foreseeable challenges and perspectives
    corecore