Non-invasive monitoring and control in silicon photonics by CMOS integrated electronics

As photonics breaks away from today's device level toward large scale of integration and complex systems-on-a-chip, concepts like monitoring, control and stabilization of photonic integrated circuits emerge as new paradigms. Here, we show non-invasive monitoring and feedback control of high quality factor silicon photonics resonators assisted by a transparent light detector directly integrated inside the cavity. Control operations are entirely managed by a CMOS microelectronic circuit, hosting many parallel electronic read-out channels, that is bridged to the silicon photonics chip. Advanced functionalities, such as wavelength tuning, locking, labeling and swapping are demonstrated. The non-invasive nature of the transparent monitor and the scalability of the CMOS read-out system offer a viable solution for the control of arbitrarily reconfigurable photonic integrated circuits aggregating many components on a single chip

Automated routing and control of silicon photonic switch fabrics

Automatic reconfiguration and feedback controlled routing is demonstrated in an 8×8 silicon photonic switch fabric based on Mach-Zehnder interferometers. The use of non-invasive Contactless Integrated Photonic Probes (CLIPPs) enables real-time monitoring of the state of each switching element individually. Local monitoring provides direct information on the routing path, allowing an easy sequential tuning and feedback controlled stabilization of the individual switching elements, thus making the switch fabric robust against thermal crosstalk, even in the absence of a cooling system for the silicon chip. Up to 24 CLIPPs are interrogated by a multichannel integrated ASIC wire-bonded to the photonic chip. Optical routing is demonstrated on simultaneous WDM input signals that are labelled directly on-chip by suitable pilot tones without affecting the quality of the signals. Neither preliminary circuit calibration nor lookup tables are required, being the proposed control scheme inherently insensible to channels power fluctuations

Verbal reduplication in Sinitic

The main aim of this paper is to underpin the connection between the semantic relationship binding the constituents of verbs and the formal and semantic properties of their reduplication in Sinitic. We first discuss in detail verbal and adjectival reduplication in Standard Mandarin, the best described Chinese language; we also collected data on adjectives, in order to compare them to verbs. Then, we analyze data from a convenience sample of twelve Chinese \u2018dialects\u2019, representing the eight major groups of Sinitic, comparing them to Mandarin. We show that whereas the ABAB reduplication pattern often has a (counter-iconic) diminishing meaning and appears as close(r) to syntax, being also sensitive to the aspectual properties of the base, the AABB pattern always has an increasing function, regardless of the word class of the base, and it is a phenomenon conditioned by morphological factors, being sensitive to the relation holding between the constituents of the base verb

Fiber-to-waveguide alignment assisted by a transparent integrated light monitor

A novel fiber-to-waveguide alignment technique assisted by a transparent integrated light monitor is presented. The waveguide power is measured near the chip input facet by the contactless integrated photonic probe, which provides a feedback electrical signal steering the fiber positioning system. Automated single fiber to silicon nanowaveguide coupling is demonstrated with 40-nm resolution in a time scale of few seconds. The presented approach makes the fiber alignment procedure independent of the optical circuit integrated on the photonic chip, avoiding the need for simultaneous alignment of an output fiber, and thus easing optical chip characterization, wafer-level testing, and packaging of photonic devices

All-optical mode unscrambling on a silicon photonic chip

Propagation of light beams through scattering or multimode systems may lead to randomization of the spatial coherence of the light. Although information is not lost, its recovery requires a coherent interferometric reconstruction of the original signals, which have been scrambled into the modes of the scattering system. Here, we show that we can automatically unscramble four optical beams that have been arbitrarily mixed in a multimode waveguide, undoing the scattering and mixing between the spatial modes through a mesh of silicon photonics Mach-Zehnder interferometers. Using embedded transparent detectors and a progressive tuning algorithm, the mesh self-configures automatically and reset itself after significantly perturbing the mixing, without turning off the beams. We demonstrate the recovery of four separate 10 Gbits/s information channels, with residual cross-talk between beams of -20dB. This principle of self-configuring and self-resetting in optical systems should be applicable in a wide range of optical applications.Comment: 23 pages, 10 figure

Amorphous-silicon visible-light detector integrated on silicon nitride waveguides

: Visible-light integrated photonics is emerging as a promising technology for the realization of optical devices for applications in sensing, quantum information and communications, imaging, and displays. Among the existing photonic platforms, high-index-contrast silicon nitride (Si3N4) waveguides offer broadband transparency in the visible spectral range and a high scale of integration. As the complexity of photonic integrated circuits (PICs) increases, on-chip detectors are required to monitor their working point for reconfiguration and stabilization operations. In this Letter, we present a semi-transparent in-line power monitor integrated on Si3N4 waveguides that operates in the red-light wavelength range (660 nm). The proposed device exploits the photoconductivity of a hydrogenated amorphous-silicon (a-Si:H) film that is evanescently coupled to an optical waveguide. Experimental results show a responsivity of 30 mA/W, a sensitivity of -45 dBm, and a sub-µs time response. These features enable the use of the proposed photoconductor for high-sensitivity monitoring and control of visible-light Si3N4 PICs

Wavelength locking of silicon photonics multiplexer for DML-based WDM transmitter

We present a wavelength locking platform enabling the feedback control of silicon (Si) microring resonators (MRRs) for the realization of a 4 × 10 Gb/s wavelength-division-multiplexing (WDM) transmitter. Four thermally tunable Si MRRs are employed to multiplex the signals generated by four directly modulated lasers (DMLs) operating in the L-band, as well as to improve the quality of the DMLs signals. Feedback control is achieved through a field-programmable gate array controller by monitoring the working point of each MRR through a transparent detector integrated inside the resonator. The feedback system provides an MRR wavelength stability of about 4 pm (0.5 GHz) with a time response of 60 ms. Bit error rate (BER) measurements confirm the effectiveness and the robustness of the locking system to counteract sensitivity degradations due to thermal drifts, even under uncooled operation conditions for the Si chip

Automated routing and control of silicon photonic switch fabrics

Automatic reconfiguration and feedback controlled routing is demonstrated in an 8×8 silicon photonic switch fabric based on Mach-Zehnder interferometers. The use of non-invasive Contactless Integrated Photonic Probes (CLIPPs) enables realtime monitoring of the state of each switching element individually. Local monitoring provides direct information on the routing path, allowing an easy sequential tuning and feedback controlled stabilization of the individual switching elements, thus making the switch fabric robust against thermal crosstalk, even in the absence of a cooling system for the silicon chip. Up to 24 CLIPPs are interrogated by a multichannel integrated ASIC wirebonded to the photonic chip. Optical routing is demonstrated on simultaneous WDM input signals that are labelled directly on-chip by suitable pilot tones without affecting the quality of the signals. Neither preliminary circuit calibration nor lookup tables are required, being the proposed control scheme inherently insensible to channels power fluctuations