Fabrication and biomechanical characterization of a spider silk reinforced fibrin-based vascular prosthesis

With fibrin-based vascular prostheses, vascular tissue engineering offers a promising approach for the fabrication of biologically active regenerative vascular grafts. As a potentially autologous biomaterial, fibrin exhibits excellent hemo- and biocompatibility. However, the major problem in the use of fibrin constructs in vascular tissue engineering, which has so far prevented their widespread clinical application, is the insufficient biomechanical stability of unprocessed fibrin matrices. In this proof-of-concept study, we investigated to what extent the addition of a spider silk network into the wall structure of fibrin-based vascular prostheses leads to an increase in biomechanical stability and an improvement in the biomimetic elastic behavior of the grafts. For the fabrication of hybrid prostheses composed of fibrin and spider silk, a statically cast tubular fibrin matrix was surrounded with an envelope layer of Trichonephila edulis silk using a custom built coiling machine. The fibrin matrix was then compacted and pressed into the spider silk network by transluminal balloon compression. This manufacturing process resulted in a hybrid prosthesis with a luminal diameter of 4 mm. Biomechanical characterization revealed a significant increase in biomechanical stability of spider silk reinforced grafts compared to exclusively compacted fibrin segments with a mean burst pressure of 362 ± 74 mmHg vs. 213 ± 14 mmHg (p < 0.05). Dynamic elastic behavior of the spider silk reinforced grafts was similar to native arteries. In addition, the coiling with spider silk allowed a significant increase in suture retention strength and resistance to external compression without compromising the endothelialization capacity of the grafts. Thus, spider silk reinforcement using the abluminal coiling technique represents an efficient and reproducible technique to optimize the biomechanical behavior of small-diameter fibrin-based vascular grafts

Environmental Factors Affecting the Expression of pilAB as Well as the Proteome and Transcriptome of the Grass Endophyte Azoarcus sp. Strain BH72

gene encoding the structural protein of type IV pili that are essential for plant colonization appears to be regulated in a population density-dependent manner.. The expression of one of them was shown to be induced in plant roots. sp. to analyze mechanisms and molecules involved in the population-dependent gene expression in this endophyte in future

Chemically induced hypoxia by dimethyloxalylglycine (dmog)-loaded nanoporous silica nanoparticles supports endothelial tube formation by sustained vegf release from adipose tissue-derived stem cells

Inadequate vascularization leading to insufficient oxygen and nutrient supply in deeper layers of bioartificial tissues remains a limitation in current tissue engineering approaches to which prevascularization offers a promising solution. Hypoxia triggering pre-vascularization by enhanced vascular endothelial growth factor (VEGF) expression can be induced chemically by dimethyloxalylglycine (DMOG). Nanoporous silica nanoparticles (NPSNPs, or mesoporous silica nanoparticles, MSNs) enable sustained delivery of molecules and potentially release DMOG allowing a durable capillarization of a construct. Here we evaluated the effects of soluble DMOG and DMOG-loaded NPSNPs on VEGF secretion of adipose tissue-derived stem cells (ASC) and on tube formation by human umbilical vein endothelial cells (HUVEC)-ASC co-cultures. Repeated doses of 100 mM and 500 mM soluble DMOG on ASC resulted in 3- to 7-fold increased VEGF levels on day 9 (P<0.0001). Same doses of DMOG-NPSNPs enhanced VEGF secretion 7.7-fold (P<0.0001) which could be maintained until day 12 with 500 mM DMOG-NPSNPs. In fibrin-based tube formation assays, 100 mM DMOG-NPSNPs had inhibitory effects whereas 50 mM significantly increased tube length, area and number of junctions transiently for 4 days. Thus, DMOG-NPSNPs supported endothelial tube formation by upregulated VEGF secretion from ASC and thus display a promising tool for prevascularization of tissue-engineered constructs. Further studies will evaluate their effect in hydrogels under perfusion

Perfusion promotes endothelialized pore formation in high concentration fibrin gels otherwise unsuitable for tube development

Vascularization of tissue engineered implants is crucial for their survival and integration in the recipient's body. Pre-vascularized, fibrin-based implants offer a solution since low concentration fibrin hydrogels (1 mg/mL) have been shown to promote tube formation of endothelial cells in co-culture with adipogenic stem cells. However, higher fibrinogen concentrations (> 20 mg/mL) enabling the fabrication of stable implants are necessary.We here characterized fibrin gels of 1-30 mg/mL for their rheological properties and whether they support tube formation of endothelial cell-adipogenic stem cell co-cultures for up to 7 days. Moreover, 20 mg/mL gels containing preformed channels and endothelial cell-adipogenic stem cell co-culture were perfused continuously in a customized flow chamber with 3.9 dyn/cm2 for 12 days and analyzed for capillary formation.Rheology of fibrin gels showed increasing stability proportional to fibrinogen concentration with 20 mg/mL gels having a storage module of 465 Pa. Complex tube networks stable for 7 days were observed at 1-5 mg/mL gels whereas higher concentrations showed initial sprouting only. However, perfusion of 20 mg/mL fibrin gels resulted in endothelialized pore formation in several layers of the gel with endothelial cell-adipogenic stem cell co-culture.Thus, perfusion supports the formation of capillary-like structures in fibrin gels that are too dense for spontaneous tube formation under static conditions. Future studies are necessary to further increase pore density and to investigate proper nutrition of tissue-specific target cells in the scaffold

Integration of wings and their eyespots in the speckled wood butterfly Pararge aegeria

We investigated both the phenotypic and developmental integration of eyespots on the fore- and hindwings of speckled wood butterflies Pararge aegeria. Eyespots develop within a framework of wing veins, which may not only separate eyespots developmentally, but may at the same time also integrate them by virtue of being both signalling sources and barriers during eyespot development. We therefore specifically investigated the interaction between wing venation patterns and eyespot integration. Phenotypic covariation among eyespots was very high, but only eyespots in neighbouring wing cells and in homologous wing cells on different wing surfaces were developmentally integrated. This can be explained by the fact that the wing cells of these eyespots share one or more wing veins. The wing venation patterns of fore- and hindwings were highly integrated, both phenotypically and developmentally. This did not affect overall developmental integration of the eyespots. The adaptive significance of integration patterns is discussed and more specifically we stress the need to conduct studies on phenotypic plasticity of integration

Immunogenicity of intensively decellularized equine carotid arteries is conferred by the extracellular matrix protein collagen type VI.

The limited biocompatibility of decellularized scaffolds is an ongoing challenge in tissue engineering. Here, we demonstrate the residual immunogenicity of an extensively decellularized equine carotid artery (dEAC(intens)) and identify the involved immunogenic components. EAC were submitted to an elaborated intensified decellularization protocol with SDS/sodium desoxycholate for 72 h using increased processing volumes (dEAC(intens)), and compared to dEAC(ord) prepared by an ordinary protocol (40 h, normal volumes). Matrix integrity was checked via correlative volumetric visualization which revealed only minor structural changes in the arterial wall. In dEAC(intens), a substantial depletion of cellular components was obvious for smooth muscle actin (100%), MHC I complexes (97.8%), alphaGal epitops (98.4% and 91.3%) and for DNA (final concentration of 0.34 ± 0.16 ng/mg tissue). However, dEAC(intens) still evoked antibody formation in mice after immunization with dEAC(intens) extracts, although to a lower extent than dEAC(ord). Mouse plasma antibodies recognized a 140 kDa band which was revealed to contain collagen VI alpha1 and alpha2 chains via mass spectrometry of both 2D electrophoretically separated and immunoprecipitated proteins. Thus, even the complete removal of cellular proteins did not yield non-immunogenic dEAC as the extracellular matrix still conferred immunogenicity by collagen VI. However, as lower antibody levels were achieved by the intensified decellularization protocol, this seems to be a promising basis for further development