Stress distributions caused by three types of loading on a circular semimonocoque cylinder with flexible rings

Equations are derived for the stress distributions caused by three types of loading on infinitely long circular, semimonocoque cylinders with flexible rings. The results are given as formula for the stringer loads and shear flows in the shell due to each type of loading. For each loading case these formulas can be used to construct tables of influence coefficients giving stringer loads and shear flows in the neighborhood of the load due to a unit magnitude of the load. (author

Stress analysis of circular semimonocoque cylinders with cutouts

A method is presented for analyzing the stresses about cutouts in circular semimonocoque cylinders with flexible rings. The method involves the use of so-called perturbation stress distributions which are superposed on the stress distribution that would exist in the structure with no cutout in such a way as to give the effects of a cutout. The method can be used for any loading case for which the structure without the cutout can be analyzed and is sufficiently versatile to account for stringer and shear reinforcement about the cutout

Stress analysis of circular semimonocoque cylinders with cutouts by a perturbation load technique

A method is presented for analyzing the stresses about a cutout in a circular cylinder of semimonocoque construction. The method involves the use of so-called perturbation solutions which are superposed on the stress distribution that would exist in the structure with no cutout in such a way as to give the effects of a cutout. The method can be used for any loading case for which the structure without the cutout can be analyzed and is sufficiently versatile to account for stringer and shear reinforcement about the cutout. (author

Structures and materials technology for hypersonic aerospacecraft

Major considerations in structural design of a transatmospheric aerospacecraft are discussed. The general direction of progress in structures and materials technology is indicated, and technical areas in structures and materials where further research and development is necessary are indicated. Various structural concepts under study and materials which appear to be most applicable are discussed. Structural design criteria are discussed with particular attention to the factor-of-safety approach and the probabilistic approach. Structural certification requirements for the aerospacecraft are discussed. The kinds of analyses and tests which would be required to certify the structural integrity, safety, and durability of the aerospacecraft are discussed, and the type of test facility needed to perform structural certification tests is identified

A variational theorem for creep with applications to plates and columns

A variational theorem is presented for a body undergoing creep. Solutions to problems of the creep behavior of plates, columns, beams, and shells can be obtained by means of the direct methods of the calculus of variations in conjunction with the stated theorem. The application of the theorem is illustrated for plates and columns by the solution of two sample problems

Structural Considerations of Inflatable Reentry Vehicles

The state of the design art for inflated structures applicable to reentry vehicles is discussed. Included are material properties, calculations of buckling and collapse loads, and calculations of deflections and vibration frequencies. A new theory for the analysis of inflated plates is presented and compared with experiment

NACA Technical Notes

From Introduction: "In reference 1 results of creep tests and empirical method for predicting collapse times are presented for plates loaded in compression on two opposite edges and with the remaining edges unloaded and supported in V-groove fixtures. Other approximate methods for handling plates having types of edge support are suggested in reference 2; however, experimental verification for these methods is quite limited. In reference 3 an analysis based on small-deflection theory is made of the creep deflection of a simply supported plate composed of a linear viscoelastic material - that is, a material in which the stress and strain and their appropriate time derivatives are related in a linear fashion.

NACA Technical Notes

A theoretical investigation is presented of the torsional stiffness of thin-walled aerodynamic surfaces filled with cores which stabilize the skins. Rectangular, slender triangular, and slender diamond cross sections are considered. Results for the torsional stiffness constants are shown graphically