Photon induced secondary electron emission

Numerical models for predicting photon-induced secondary electron emission are presented. The results are compared with experimental measurements made using a Co-60 gamma ray source

Work hardening behavior in a steel with multiple TRIP mechanisms

Transformation induced plasticity (TRIP) behavior was studied in steel with composition Fe-0.07C-2.85Si-15.3Mn-2.4Al-0.017N that exhibited two TRIP mechanisms. The initial microstructure consisted of both {\epsilon}- and {\alpha}-martensites with 27% retained austenite. TRIP behavior in the first 5% strain was predominately austenite transforming to {\epsilon}-martensite (Stage I), but upon saturation of Stage I, the {\epsilon}-martensite transformed to {\alpha}-martensite (Stage II). Alloy segregation also affected the TRIP behavior with alloy rich regions producing TRIP just prior to necking. This behavior was explained by first principle calculations that revealed aluminum significantly affected the stacking fault energy in Fe-Mn-Al-C steels by decreasing the unstable stacking fault energy and promoting easy nucleation of {\epsilon}-martensite. The addition of aluminum also raised the intrinsic stacking fault energy and caused the {\epsilon}-martensite to be unstable and transform to {\alpha}-martensite under further deformation. The two stage TRIP behavior produced a high strain hardening exponent of 1.4 and led to ultimate tensile strength of 1165 MPa and elongation to failure of 35%.Comment: submitted to Met. Mater. Trans. A manuscript E-TP-12-953-

Synthesis and characteristics of polyarylene ether sulfones

A method utilizing potassium carbonate/dimethyl acetamide, as base and solvent respectively, was used for the synthesis of several homopolymers and copolymers derived from various bisphenols. It is demonstrated that this method deviates from simple second order kinetics; this deviation being due to the heterogeneous nature of the reaction. Also, it is shown that a liquid induced crystallization process can improve the solvent resistance of these polymers. Finally, a Monte Carlo simulation of the triad distribution of monomers in nonequilibrium copolycondensation is discussed

Teaching Physics Using Virtual Reality

We present an investigation of game-like simulations for physics teaching. We report on the effectiveness of the interactive simulation "Real Time Relativity" for learning special relativity. We argue that the simulation not only enhances traditional learning, but also enables new types of learning that challenge the traditional curriculum. The lessons drawn from this work are being applied to the development of a simulation for enhancing the learning of quantum mechanics

Formation of a quasicrystalline Pb monolayer on the ten-fold surface of the decagonal Al-Ni-Co quasicrystal

Lead has been deposited on the ten-fold surface of decagonal Al72Ni11Co17 to form an epitaxial quasicrystalline single-element monolayer. The overlayer grows through nucleation of nanometer-sized irregular islands and the coverage saturates at 1 ML. The overlayer is well-ordered quasiperiodically as evidenced by LEED and Fourier transforms of STM images. Annealing the film to 600 K improves the structural quality, but causes the evaporation of some material such that the film develops pores. Electronic structure measurements using X-ray photoemission spectroscopy indicate that the chemical interaction of the Pb atoms with the substrate is weak.Comment: 12 pages, 5 figure

Toughening of BIS maleimide resins: Synthesis and characterization of maleimide terminated poly(arylene ether) oligomers and polymers

Amine functional poly(arylene ether) sulfones were previously reported. Herein, the chemistry was extended to amorphous poly(arylene ether) ketones because of their higher fracture toughness values, relative to the polysulfones. It was demonstrated that the amino functional oligomers undergo a self-crosslinking reaction at temperatures above about 220 C. This produces an insoluble, but ductile network that has excellent resistance. A ketamine structure hypothesis was proposed and verified using solid state magic angle NMR. In most cases, the water generated upon ketamine formation is too low to produce porosity and solid networks are obtained. The stability of the ketamine networks towards hydrolysis is excellent. The chemistry was further demonstrated to be able to crosslink preformed nonfunctional poly(arylene ether) ketones if a difunctional amine was utilized. This concept has the possibility of greatly improving the creep resistance of thermoplastics. Also, a new technique was developed for converting the amine functional oligomers cleanly into maleimide structures. This method involves reacting maleic anhydride with monomeric aminophenols in the presence of solvent mixtures

Mobile target tracking using a reconfigurable low earth orbit constellation

Traditional Earth-observing satellite constellations must preselect orbits to match established mission objectives, inherently limiting the capability of the system to respond to dynamic events. A more flexible approach to constellation design which maneuvers satellites to new orbits throughout the mission lifetime can enable the tracking of mobile targets; such a concept will be explored and evaluated in the following paper. Currently, an existing approach for creating a reconfigurable constellation of satellites (ReCon) demonstrates some increased functionality. However, the repeating ground track (RGT) orbits used are only well-suited for static ground targets (i.e. particular latitude and longitude points) as they are defined by their repetitious passes over the particular points on the globe; inherently these orbits are not ideal for tracking mobile targets such as ships, oil spills, hurricanes, and other weather events. By addressing this gap and designing the constellation to follow these mobile targets, data return can be of higher quality and quantity leading toward improved predictions of future movements. Traditional non-maneuverable satellites may of course capture mobile feature data; however, the quality and quantity of data returned is driven by the satellites’ orbits which were not designed for the particular mobile target. A proposed concept of operations that models possible sequential satellite maneuvers as a graph has shown promise for tracking mobile targets in the case of a single satellite. In the following paper, this concept is further explored by the addition of an optimizer to this method, applied to both a single satellite and a constellation of maneuverable satellites, like ReCon. Results for a tropical storm case study indicate that with relatively low amounts of delta-V per satellite, many possible maneuver combinations are found which result in improved accesses with greater total access time and closer passes. Trade-offs are shown between total target access time, mean distance to targets upon access, and total delta-V used. The performance of increased constellation size is also explored. By having satellites dynamically respond to mobile targets such as hurricanes, satellite imagery and remote sensing can be of better quality and even contribute to better predictions for developing storms

Polyaryl ethers and related polysiloxane copolymer molecular coatings preparation and radiation degrdation

Poly(arylene ether sulfones) comprise a class of materials known as engineering thermoplastics which have a variety of important applications. These polymers are tough, rigid materials with good mechanical properties over a wide temperature range, and they are processed by conventional methods into products typically having excellent hydrolytic, thermal, oxidative and dimensional stability. Wholly aromatic random copolymers of hydroquinone and biphenol with 4.4 prime dichlorodiphenyl sulfone were synthesized via mechanical nucleophilic displacement. Their structures were characterized and mechanical behavior studied. These tough, ductile copolymers show excellent radiation resistance to electron beam treatment and retain much of the mechanical properties up to at least 700 Mrads under argon

A systematic review of mortality in schizophrenia - Is the differential mortality gap worsening over time?

Context Despite improvements in mental health services in recent decades, it is unclear whether the risk of mortality in schizophrenia has changed over time. Objective To explore the distribution of standardized mortality ratios (SMRs) for people with schizophrenia. Data Sources Broad search terms were used in MEDLINE, PsychINFO, Web of Science, and Google Scholar to identify all studies that investigated mortality in schizophrenia, published between January 1, 1980, and January 31, 2006. References were also identified from review articles, reference lists, and communication with authors. Study Selection Population-based studies that reported primary data on deaths in people with schizophrenia. Data Extraction Operationalized criteria were used to extract key study features and mortality data. Data Synthesis We examined the distribution of SMRs and pooled selected estimates using random-effects meta-analysis. We identified 37 articles drawn from 25 different nations. The median SMR for all persons for all-cause mortality was 2.58 (10%-90% quantile, 1.18-5.76), with a corresponding random-effects pooled SMR of 2.50 (95% confidence interval, 2.18-2.43). No sex difference was detected. Suicide was associated with the highest SMR (12.86); however, most of the major causes-of-death categories were found to be elevated in people with schizophrenia. The SMRs for all-cause mortality have increased during recent decades (P = .03). Conclusions With respect to mortality, a substantial gap exists between the health of people with schizophrenia and the general community. This differential mortality gap has worsened in recent decades. In light of the potential for second-generation antipsychotic medications to further adversely influence mortality rates in the decades to come, optimizing the general health of people with schizophrenia warrants urgent attention