Laparoscopic Assisted Fusion of the Lumbosacral Spine: A Biomechanical and Histologic Analysis of the Open Versus Laparoscopic Technique in an Animal Model

Study Design. An animal model for laparoscopic lumbosacral fusion. Objectives. To compare the biomechanical and histologic results of open to laparoscopic lumbosacral discectomy and fusion in an animal model. Background Data. Early clinical reports of laparoscopic lumbosacral fusions are encouraging, but animal experiments have not been reported. Methods. Ten pigs (50-80 kg) were divided into two groups. Group 1 underwent an open anterior lumbosacral discectomy and fusion at L7-S1 using autologous bone graft and a titanium MOSS (DePuy Motech) cage. Group 2 was identical to Group 1 except that a laparoscopic technique was used. The animals were killed at 3 months, and the lumbosacral spines were harvested for biomechanical and histologic testing. Results. Estimated blood loss and average length of operation, respectively, for the two groups were: Group 1, 50 mL, 2 hours 50 minutes; and Group 2, 40 mL, 3 hours 40 minutes. There were no perioperative or postoperative complications in either group. Motion analysis results showed less motion in lateral bending, flexion, and extension than in the intact specimen in both groups. Tensile testing showed that the stiffness was significantly greater in the open group than in the laparoscopic group (P \u3c 0.004). Histologic examination showed a less extensive discectomy and less bone growth in the implant in the laparoscopic group. Inadequate decortication of end-plates occurred in two animals who underwent laparoscopy. Conclusions. Although lumbosacral discectomy and implant insertion can be performed using the laparoscopic technique, the construct may not have the same biomechanical strength as that attained with the open procedure. Laparoscopic-assisted lumbosacral fusion surgery requires additional investigation before it is widely used in clinical situations

Biomechanical and Radiographic Evaluation of an Ovine Model for the Human Lumbar Spine

While various species of animal models have been used in preclinical investigations of spinal implant devices to assess their biological adaptation and biomechanical performance, few studies have made comprehensive comparisons to validate their suitability of modelling the human spine. The purpose of this study was to assess essential biomechanical behaviours and disc morphology of the ovine lumbar model. Flexibility testing was conducted on the spines (L3—L4 and L4—L5) of nine skeletally matured sheep. Segmental rotation and intradiscal pressure were measured and load sharing between the intervertebral disc and posterior elements were calculated on the basis of a simplified parallel spring model. Following the tests, the spinal segments were sectioned into a series of sagittal slabs, and transverse radiographs of these slabs were taken to evaluate the variation in the disc height and end-plate curvature. Comparing the biomechanical and radiographic results with published data on the human lumbar spine, good comparability between the ovine and cadaveric lumbar spines was found in terms of the general disc shape and in most of the biomechanical parameters including the range of motion, neutral zone, and load sharing between the intervertebral disc and posterior elements. A few distinctive differences were also found between the two, including flatter sagittal alignment, smaller disc dimensions, and greater lateral bending motion in the ovine model

The kinetics of cluster fragmentation and depolymerisation

The equation that describes fragmentation kinetics, such as that which occurs in cluster breakup and polymer chain degradation (depolymerisation), is solved for models where the rate of breakup depends upon the size of the object breaking up. The resulting dynamic scaling behaviour is investigated. Both discrete and continuous models are considered.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/48803/2/jav18i15p3027.pd

Widespread dysregulation of MiRNAs by MYCN amplification and chromosomal imbalances in neuroblastoma: association of miRNA expression with survival

MiRNAs regulate gene expression at a post-transcriptional level and their dysregulation can play major roles in the pathogenesis of many different forms of cancer, including neuroblastoma, an often fatal paediatric cancer originating from precursor cells of the sympathetic nervous system. We have analyzed a set of neuroblastoma (n = 145) that is broadly representative of the genetic subtypes of this disease for miRNA expression (430 loci by stem-loop RT qPCR) and for DNA copy number alterations (array CGH) to assess miRNA involvement in disease pathogenesis. The tumors were stratified and then randomly split into a training set (n = 96) and a validation set (n = 49) for data analysis. Thirty-seven miRNAs were significantly over-or under-expressed in MYCN amplified tumors relative to MYCN single copy tumors, indicating a potential role for the MYCN transcription factor in either the direct or indirect dysregulation of these loci. In addition, we also determined that there was a highly significant correlation between miRNA expression levels and DNA copy number, indicating a role for large-scale genomic imbalances in the dysregulation of miRNA expression. In order to directly assess whether miRNA expression was predictive of clinical outcome, we used the Random Forest classifier to identify miRNAs that were most significantly associated with poor overall patient survival and developed a 15 miRNA signature that was predictive of overall survival with 72.7% sensitivity and 86.5% specificity in the validation set of tumors. We conclude that there is widespread dysregulation of miRNA expression in neuroblastoma tumors caused by both over-expression of the MYCN transcription factor and by large-scale chromosomal imbalances. MiRNA expression patterns are also predicative of clinical outcome, highlighting the potential for miRNA mediated diagnostics and therapeutics

Sampling Local Fungal Diversity in an Undergraduate Laboratory using DNA Barcoding

Traditional methods for fungal species identification require diagnostic morphological characters and are often limited by the availability of fresh fruiting bodies and local identification resources. DNA barcoding offers an additional method of species identification and is rapidly developing as a critical tool in fungal taxonomy. As an exercise in an undergraduate biology course, we identified 9 specimens collected from the Hendrix College campus in Conway, Arkansas, USA to the genus or species level using morphology. We report that DNA barcoding targeting the internal transcribed spacer (ITS) region supported several of our taxonomic determinations and we were able to contribute 5 ITS sequences to GenBank that were supported by vouchered collection information. We suggest that small-scale barcoding projects are possible and that they have value for documenting fungal diversity

Evolution of Vibrational Spectra in the Manganese-Silicon Clusters Mn₂Si_n, n = 10, 12, and 13, and Cationic [Mn₂Si₁₃]⁺

A comparison of DFT-computed and measured infrared spectra reveals the ground state structures of a series of gas-phase silicon clusters containing a common Mn2 unit. Mn2Si12 and [Mn2Si13]+ are both axially symmetric, allowing for a clean separation of the vibrational modes into parallel (a1) and perpendicular (e1) components. Information about the Mn–Mn and Mn–Si bonding can be extracted by tracing the evolution of these modes as the cluster increases in size. In [Mn2Si13]+ where the antiprismatic core is capped on both hexagonal faces, a relatively simple spectrum emerges that reflects a pseudo-D6d geometry. In cases where the cluster is more polar, either because there is no capping atom in the lower face (Mn2Si12) or the capping atom is present but displaced off the principal axis (Mn2Si13), the spectra include additional features derived from vibrational modes that are forbidden in the parent antiprism

Sooty Falcon Falco concolor reproduction and population dynamics on the islands in the Sea of Oman

Knowledge of demographic parameters affecting population dynamics is critical to the formulation of effective conservation strategies. Sooty Falcon Falco concolor is a little-studied, Near-threatened species; estimates of global population size and trend for this species are uncertain. They lay eggs during mid-summer and sometimes nest in colonies. This unusual breeding ecology suggests that demographic parameters driving their population growth rate may differ from those of most other falcons. We studied Sooty Falcon reproduction at breeding aggregations on Fahal Island and the Daymaniyat islands in the Sea of Oman during 2007–2014, modelled population growth and identified important life history parameters using elasticity analysis. The mean (± se) clutch and brood size was 2.83 ± 0.06 and 2.11 ± 0.07, respectively. Overall, 11.7% of nests failed between the egg and nestling stages, and the failure rate differed significantly between Fahal and the Daymaniyats, and across years. The mean proportion of eggs that hatched annually was 0.66 ± 0.02, and broods were significantly smaller on the Daymaniyats than on Fahal. Falcons on Fahal Island had a higher rate of hatching, a higher rate of nests that produced at least one chick, and produced more chicks per nest than on the Daymaniyats. We suggest that Fahal's proximity to the mainland gives breeding Sooty Falcons access to a more plentiful and stable source of food, especially during the period between arrival from the wintering grounds and the onset of the autumn migration of prey birds, resulting in the better reproductive rates for falcons on Fahal Island, relative to those on the Daymaniyat Islands. The annual asymptotic population growth rate (λ) was 0.87 (95% confidence interval (CI) 0.75–0.99), suggesting a declining population, although Sooty Falcons enjoyed a slightly higher population growth rate on Fahal than on the Daymaniyats. Because our study population is on the edge of the breeding range and is isolated from other breeding areas, measures to improve reproductive success of Sooty Falcons breeding on the islands in the Sea of Oman could be important for conservation of Sooty Falcons in Oman