Inclusion of the second Umkehr in the conventional Umkehr retrieval analysis as a means of improving ozone retrievals in the upper stratosphere

The Umkehr method for retrieving the gross features of the vertical ozone distribution requires measurements of the ratio of zenith-sky radiances at two wavelengths in the near-UV region while the solar zenith angle (SZA) changes from 60 to 90 degrees. A Brewer spectrophotometer was used for taking such measurements extending the SZA range down to 96 degrees. Analyzed data from the Spring of 1991 imply that observations at twilight are of great significance in improving ozone retrievals in the upper stratosphere. Judged by the variance reduction for Umkehr layers 9 to 12 (25-30 percent for layer 11) and the increase in separation and amplitude of the averaging kernels for the relevant layers, the ozone retrievals in the upper stratosphere are shown to be in better agreement with climatological means

Probability Distributions of Particle Hop Distance and Travel Time Over Equilibrium Mobile Bedforms

The joint probability distribution of streamwise particle hop distance, lateral particle hop distance, and travel time constrains the relationships between topographic change and sediment transport at the granular scale. Previous studies have investigated the ensemble characteristics of particle motions over plane bed topography; however, it is unclear whether reported distributions remain valid when bedforms are present. Here, we present measurements of particle motion over bedform topography obtained in a laboratory flume and compare these to particle motions over plane bed topography with otherwise similar conditions. We find substantial differences in particle motion in the presence of bedforms that are relevant to macroscopic models of sediment transport. Most notably, bedforms increase the standard deviation of streamwise and lateral hop distances relative to the mean streamwise hop distance. This implies that bedforms increase the streamwise and lateral diffusion lengths and, equivalently, increase diffusive-like fluxes

Quantifying the stratigraphic completeness of delta shoreline trajectories

Understanding the incomplete nature of the stratigraphic record is fundamental for interpreting stratigraphic sequences. Methods for quantifying stratigraphic completeness for one-dimensional stratigraphic columns, defined as the proportion of time intervals of some length that contain stratigraphy, are commonplace; however, quantitative assessments of completeness in higher dimensions are lacking. Here we present a metric for defining stratigraphic completeness of two-dimensional shoreline trajectories using topset-foreset rollover positions in dip-parallel sections and describe the preservation potential of a shoreline trajectory derived from the geometry of the delta surface profile and the kinematics of the geomorphic shoreline trajectory. Two end-member forward models are required to fully constrain the preservation potential of the shoreline dependent on whether or not a topset is eroded during base level fall. A laboratory fan-delta was constructed under nonsteady boundary conditions, and one-dimensional stratigraphic column and two-dimensional shoreline completeness curves were calculated. Results are consistent with the hypothesis derived from conservation of sediment mass that completeness over all timescales should increase given increasing dimensions of analysis. Stratigraphic trajectories and completeness curves determined from forward models using experimental geomorphic trajectories compare well to values from transects when subsampled to the equivalent stratigraphic resolution as observed in the actual preserved sequence. The concept of stratigraphic completeness applied to two-dimensional trajectory analysis and the end-member forward models presented here provide novel tools for a conceptual understanding of the nature of stratigraphic preservation at basin scales

Ozone depletion, greenhouse gases, and climate change

This symposium was organized to study the unusual convergence of a number of observations, both short and long term that defy an integrated explanation. Of particular importance are surface temperature observations and observations of upper atmospheric temperatures, which have declined significantly in parts of the stratosphere. There has also been a dramatic decline in ozone concentration over Antarctica that was not predicted. Significant changes in precipitation that seem to be latitude dependent have occurred. There has been a threefold increase in methane in the last 100 years; this is a problem because a source does not appear to exist for methane of the right isotopic composition to explain the increase. These and other meteorological global climate changes are examined in detail

Handbook of Test Methods for Evaluating Chemical Deicers

This handbook contains a structured selection of specific test methods for complete characterization of deicing chemicals. Sixty-two specific test methods are defined for the evaluation of chemical deicers in eight principal property performance areas: 1) physicochemical characteristics; 2) deicing performance; 3) compatibility with bare and coated metals in concrete; 5) compatibility with concrete and nonmetals; 6) engineering parameters; 7) ecological effects; and 8) health and safety aspects. The 62 specific chemical deicer test methods are composed of 12 primary and 50 supplementary test methods. The primary test methods, which were developed for conducting the more important evaluations, are identified as follows: 1) ice melting tests for liquid and solid deicers; 2) ice penetration tests for liquid and solid deicers; 3) ice undercutting tests for liquid and solid deicers; 4) bare metal corrosion test; 5) concrete degradation test; 6) concrete scaling test; 7) friction characterization test; 8) ecological effects tests; and 9) rebar in concrete corrosion test. xx

The observability of galaxy merger signatures in nearby gas-rich spirals

Galaxy mergers are crucial to understanding galaxy evolution, therefore we must determine their observational signatures to select them from large IFU galaxy samples such as MUSE and SAMI. We employ 24 high-resolution idealized hydrodynamical galaxy merger simulations based on the ‘Feedback In Realistic Environment’ (FIRE-2) model to determine the observability of mergers to various configurations and stages using synthetic images and velocity maps. Our mergers cover a range of orbital configurations at fixed 1:2.5 stellar mass ratio for two gas rich spirals at low redshift. Morphological and kinematic asymmetries are computed for synthetic images and velocity maps spanning each interaction. We divide the interaction sequence into three: (1) the pair phase; (2) the merging phase; and (3) the post-coalescence phase. We correctly identify mergers between first pericentre passage and 500 Myr after coalescence using kinematic asymmetry with 66 per cent completeness, depending upon merger phase and the field of view of the observation. We detect fewer mergers in the pair phase (40 per cent) and many more in the merging and post-coalescence phases (97 per cent). We find that merger detectability decreases with field of view, except in retrograde mergers, where centrally concentrated asymmetric kinematic features enhances their detectability. Using a cut-off derived from a combination of photometric and kinematic asymmetry, we increase these detections to 89 per cent overall, 79 per cent in pairs, and close to 100 per cent in the merging and post-coalescent phases. By using this combined asymmetry cut-off we mitigate some of the effects caused by smaller fields of view subtended by massively multiplexed integral field spectroscopy programmes

Green Solvent Selection for Emulsifiable Concentrate Agrochemical Formulations

Emulsifiable concentrates are a common form of agrochemical formulation in which a high quantity of active ingredient is typically dissolved in an aromatic hydrocarbon solvent. There are considerable health and environmental hazards associated with the solvents in emulsifiable concentrates, and finding alternatives was deemed worthy of investigation. Using a combination of in silico modeling and experimental testing, a number of alternative safer solvents have been tested for the agrochemicals pendimethalin, prochloraz, and pyraclostrobin. Cyclohexanone, diethyl carbonate, ethyl acetate, and dihydrolevoglucosenone (Cyrene) were observed to be effective solvents

Performance of the ground-based total ozone network assessed using satellite data

Dobson and Brewer spectrophotometer and filter ozonometer data available from the World Ozone and Ultraviolet Data Centre (WOUDC) were compared with satellite total ozone measurements from TOMS (onboard Nimbus 7, Meteor 3, and Earth Probe satellites), OMI (AURA satellite) and GOME (ERS-2 satellite) instruments. Five characteristics of the difference with satellite data were calculated for each site and instrument type: the mean difference, the standard deviation of daily differences, the standard deviation of monthly differences, the amplitude of the seasonal component of the difference, and the range of annual values. All these characteristics were calculated for five 5-year-long bins and for each site separately for direct sun (DS) and zenith sky (ZS) ozone measurements. The main percentiles were estimated for the five characteristics of the difference and then used to establish criteria for “suspect” or “outlier” sites for each characteristic. About 61% of Dobson, 46% of Brewer, and 28% of filter stations located between 60°S and 60°N have no “suspect” or “outlier” characteristics. In nearly 90% of all cases, Dobson and Brewer sites demonstrated 5-year mean differences with satellites to be within ±3% (for DS observations). The seasonal median difference between all Brewer DS measurements at 25°–60°N and GOME and OMI overpasses remained within ±0.5% over a period of more than 10 years (...

Rabbit Haemorrhagic Disease Virus 2 (RHDV2; GI.2) in Ireland Focusing on Wild Irish Hares (Lepus timidus hibernicus): An Overview of the First Outbreaks and Contextual Review.

Publication history: Accepted - 22 February 2022; Published online - 24 February 2022Rabbit haemorrhagic disease virus 2 (RHDV2; GI.2) is a pathogenic lagovirus that emerged in 2010, and which now has a global distribution. Outbreaks have been associated with local population declines in several lagomorph species, due to rabbit haemorrhagic disease (RHD)-associated mortality raising concerns for its potential negative impact on threatened or vulnerable wild populations. The Irish hare (Lepus timidus hibernicus) is endemic to Ireland, and is of conservation interest. The first cases of RHDV2 in Ireland were reported in domestic rabbits (Oryctolagus cuniculus) in 2016, soon followed by the first known case in a wild rabbit also in 2016, from a population reported to be experiencing high fatalities. During summer 2019, outbreaks in wild rabbits were confirmed in several locations throughout Ireland. Six cases of RHDV2 in wild hares were confirmed between July and November 2019, at four locations. Overall, 27 cases in wildlife were confirmed in 2019 on the island of Ireland, with a predominantly southern distribution. Passive surveillance suggests that the Irish hare is susceptible to lethal RHDV2 infection, and that spillover infection to hares is geographically widespread in eastern areas of Ireland at least, but there is a paucity of data on epidemiology and population impacts. A literature review on RHD impact in closely related Lepus species suggests that intraspecific transmission, spillover transmission, and variable mortality occur in hares, but there is variability in reported resistance to severe disease and mortality amongst species. Several key questions on the impact of the pathogen in Irish hares remain. Surveillance activities throughout the island of Ireland will be important in understanding the spread of infection in this novel hostThis research received no external fundin

Fabrication of PES/PVP water filtration membranes using cyrene®, a safer bio-based polar aprotic solvent

A more sustainable dialysis and water filtration membrane has been developed, by using the new, safer, bio-based solvent Cyrene® in place of N-methyl pyrrolidinone (NMP). The effects of solvent choice, solvent evaporation time, the temperature of casting gel, and coagulation bath together with the additive concentration on porosity and pore size distribution were studied. The results, combined with infrared spectra, SEM images, porosity results, water contact angle (WCA), and water permeation, confirm that Cyrene® is better media to produce polyethersulfone (PES) membranes. New methods, Mercury Intrusion Porosimetry (MIP) and NMR-based pore structure model, were applied to estimate the porosity and pore size distribution of the new membranes produced for the first time with Cyrene® and PVP as additive. Hansen Solubility Parameters in Practice (HSPiP) was used to predict polymer-solvent interactions. The use of Cyrene® resulted in reduced polyvinylpyrrolidone (PVP) loading than required when using NMP and gave materials with larger pores and overall porosity. Two different conditions of casting gel were applied in this study: a hot (70°C) and cold gel (17°C) were cast to obtain membranes with different morphologies and water filtration behaviours