Low Fuel Convergence Path to Direct-Drive Fusion Ignition

A new class of inertial fusion capsules is presented that combines multishell targets with laser direct drive at low intensity (2.8×10¹⁴  W/cm²) to achieve robust ignition. The targets consist of three concentric, heavy, metal shells, enclosing a volume of tens of μg of liquid deuterium-tritium fuel. Ignition is designed to occur well “upstream” from stagnation, with minimal pusher deceleration to mitigate interface Rayleigh-Taylor growth. Laser intensities below thresholds for laser plasma instability and cross beam energy transfer facilitate high hydrodynamic efficiency (∼10%)

Application of quality by design tools to upstream processing of platelet precursor cells to enable in vitro manufacture of blood products

Annually 4.5 million platelet units are transfused in Europe and the United States. These are obtained solely from allogeneic donations and have a shelf life of 5-7 days. To address the corresponding supply challenge, Moreau et al.1 devised a novel process for producing megakaryocytes (MKs, the platelet precursor cell) in vitro. A transcription-factor driven, forward-programming (FOP) approach converts human pluripotent stem cells into MKs. This strategy has the unique advantage of generating high yields of pure MKs in chemically defined medium which could lead to the production of a consistent, reliable supply of platelets which overcomes the logistical, financial and biosafety challenges for health organisations worldwide. Here we follow a Quality by Design (QbD) approach to enable improvements to the upstream processing of FOPMKs. Firstly, we created a process flow diagram for production of in vitro platelets for transfusion, which segregated processes into individual unit operations for control and optimisation. Next, we developed a Quality Target Product Profile (QTPP) and identified Critical Quality Attributes (CQAs) for each stage. We conducted a range of experiments utilising Design of Experiments (DOE) and mechanistic modelling2 tools to link Critical Process Parameters (CPPs) to CQAs. For adherent culture, we identified a productivity limit related to surface area available for growth and a cell loss phase which was dependent on cell seeding density, RhoK inhibitor usage and seed density. Using suspension cultures of FOPMK. We noted that TPO and Doxycycline concentration were CPPs as these impacted cell net growth rate and phenotype trajectory. Furthermore, we noted that medium exhaustion led to a 30% loss of viable cells over 8 hours. Proof of concept studies also showed that FOPMKs can be cultured in scaled-down suspension systems (ambr-15 and spinner flask culture) whilst retaining CQAs. 1. Moreau, T. et al. Large-scale production of megakaryocytes from human pluripotent stem cells by chemically defined forward programming. Nat. Commun. 7, 1–15 (2016). 2. Stacey, A. J., Cheeseman, E. A., Glen, K. E., Moore, R. L. L. & Thomas, R. J. Experimentally integrated dynamic modelling for intuitive optimisation of cell-based processes and manufacture. Biochem. Eng. J. 132, 130–138 (2018)

Prior tonsillectomy is associated with an increased risk of esophageal adenocarcinoma.

BACKGROUND: Esophageal cancer is a deadly cancer with 5-year survival METHODS: Cases included 452 esophagectomy cases, including 396 with EAC and 56 who underwent esophagectomy for Barrett\u27s esophagus (BE) with high grade dysplasia (HGD). 1,102 thoracic surgery patients with surgical indications other than dysplastic BE or esophageal cancer represented the controls for our analysis. The association of tonsillectomy and HGD/EAC were primarily evaluated by using univariate tests and then verified by logistic regression analysis. Baseline demographics, medical history, and thoracic surgery controls were compared by using χ2 tests or 95% CIs. Significant risk factors were considered as covariates in the multivariate models while evaluating the association between tonsillectomy and HGD/EAC. P-values or odds ratios were estimated with 95% confidence limits to identify significances which was more appropriate. RESULTS: Tonsillectomy was more common in cases than controls and was found to have a significant association with esophageal cancer (19.9% vs. 12.7%; p-value = 0.0003). This significant association persisted after controlling for other known risk factors/covariates. CONCLUSION: A prior history of tonsillectomy was significantly associated with HGD/EAC and may represent an independent risk factor for the development of EAC. However, the underlying biology driving this association remains unclear

The translation of cell-based therapies:clinical landscape and manufacturing challenges

Cell-based therapies have the potential to make a large contribution toward currently unmet patient need and thus effective manufacture of these products is essential. Many challenges must be overcome before this can become a reality and a better definition of the manufacturing requirements for cell-based products must be obtained. The aim of this study is to inform industry and academia of current cell-based therapy clinical development and to identify gaps in their manufacturing requirements. A total of 1342 active cell-based therapy clinical trials have been identified and characterized based on cell type, target indication and trial phase. Multiple technologies have been assessed for the manufacture of these cell types in order to facilitate product translation and future process development

Dirofilariasis mouse models for heartworm preclinical research

Introduction: Dirofilariasis, including heartworm disease, is a major emergent veterinary parasitic infection and a human zoonosis. Currently, experimental infections of cats and dogs are used in veterinary heartworm preclinical drug research. Methods: As a refined alternative in vivo heartworm preventative drug screen, we assessed lymphopenic mouse strains with ablation of the interleukin-2/7 common gamma chain (γc) as susceptible to the larval development phase of Dirofilaria immitis. Results: Non-obese diabetic (NOD) severe combined immunodeficiency (SCID)γc−/− (NSG and NXG) and recombination-activating gene (RAG)2−/−γc−/− mouse strains yielded viable D. immitis larvae at 2–4 weeks post-infection, including the use of different batches of D. immitis infectious larvae, different D. immitis isolates, and at different laboratories. Mice did not display any clinical signs associated with infection for up to 4 weeks. Developing larvae were found in subcutaneous and muscle fascia tissues, which is the natural site of this stage of heartworm in dogs. Compared with in vitro-propagated larvae at day 14, in vivo-derived larvae had completed the L4 molt, were significantly larger, and contained expanded Wolbachia endobacteria titres. We established an ex vivo L4 paralytic screening system whereby assays with moxidectin or levamisole highlighted discrepancies in relative drug sensitivities in comparison with in vitro-reared L4 D. immitis. We demonstrated effective depletion of Wolbachia by 70%−90% in D. immitis L4 following 2- to 7-day oral in vivo exposures of NSG- or NXG-infected mice with doxycycline or the rapid-acting investigational drug, AWZ1066S. We validated NSG and NXG D. immitis mouse models as a filaricide screen by in vivo treatments with single injections of moxidectin, which mediated a 60%−88% reduction in L4 larvae at 14–28 days. Discussion: Future adoption of these mouse models will benefit end-user laboratories conducting research and development of novel heartworm preventatives via increased access, rapid turnaround, and reduced costs and may simultaneously decrease the need for experimental cat or dog use

Impact of noncardiac findings in patients undergoing CT coronary angiography:a substudy of the Scottish computed tomography of the heart (SCOT-HEART) trial

Objectives Noncardiac findings are common on coronary computed tomography angiography (CCTA). We assessed the clinical impact of noncardiac findings, and potential changes to surveillance scans with the application of new lung nodule guidelines. Methods This substudy of the SCOT-HEART randomized controlled trial assessed noncardiac findings identified on CCTA. Clinically significant noncardiac findings were those causing symptoms or requiring further investigation, follow-up or treatment. Lung nodule follow-up was undertaken following the 2005 Fleischner guidelines. The potential impact of the 2015 British Thoracic Society (BTS) and the 2017 Fleischner guidelines was assessed. Results CCTA was performed in 1,778 patients and noncardiac findings were identified in 677 (38%). In 173 patients (10%) the abnormal findings were clinically significant and in 55 patients (3%) the findings were the cause of symptoms. Follow-up imaging was recommended in 136 patients (7.6%) and additional clinic consultations were organized in 46 patients (2.6%). Malignancy was diagnosed in 7 patients (0.4%). Application of the new lung nodule guidelines would have reduced the number of patients undergoing a follow-up CT scan: 68 fewer with the 2015 BTS guidelines and 78 fewer with the 2017 Fleischner guidelines; none of these patients subsequently developed malignancy. Conclusions Clinically significant noncardiac findings are identified in 10% of patients undergoing CCTA. Application of new lung nodule guidelines will reduce the cost of surveillance, without the risk of missing malignancy

Research cardiac magnetic resonance imaging in end stage renal disease - incidence, significance and implications of unexpected incidental findings

Objectives: Left ventricular mass (LVM) at cardiac magnetic resonance imaging (CMR) is a frequent end point in clinical trials in nephrology. Trial participants with end stage renal disease (ESRD) may have a greater frequency of incidental findings (IF). We retrospectively investigated prevalence of IF in previous research CMR and reviewed their subsequent impact on participants. Methods: Between 2002 and 2006, 161 ESRD patients underwent CMR in a transplant assessment study. Images were used to assess LV mass and function. In the current study a radiologist reviewed the scans for IF. Review of patient records determined the subsequent clinical significance of IF. Results: There were 150 IF in 95 study participants. Eighty-four (56 %) were new diagnoses. One hundred and two were non-cardiac. Fifteen were suspicious of malignancy. There was a clinically significant IF for 14.9 % of the participants. In six cases earlier identification of an IF may have improved quality of life or survival. Conclusions: Without radiology support clinically important IF may be missed on CMR. Patients undergoing CMR in trials should be counselled about the frequency and implications of IF. Patients with ESRD have a higher prevalence of IF than reported in other populations. Nephrology studies require mechanisms for radiologist reporting and strategies for dealing with IF

Adaptive Manufacturing for Healthcare During the COVID-19 Emergency and Beyond

During the COVID-19 pandemic, global health services have faced unprecedented demands. Many key workers in health and social care have experienced crippling shortages of personal protective equipment, and clinical engineers in hospitals have been severely stretched due to insufficient supplies of medical devices and equipment. Many engineers who normally work in other sectors have been redeployed to address the crisis, and they have rapidly improvised solutions to some of the challenges that emerged, using a combination of low-tech and cutting-edge methods. Much publicity has been given to efforts to design new ventilator systems and the production of 3D-printed face shields, but many other devices and systems have been developed or explored. This paper presents a description of efforts to reverse engineer or redesign critical parts, specifically a manifold for an anaesthesia station, a leak port, plasticware for COVID-19 testing, and a syringe pump lock box. The insights obtained from these projects were used to develop a product lifecycle management system based on Aras Innovator, which could with further work be deployed to facilitate future rapid response manufacturing of bespoke hardware for healthcare. The lessons learned could inform plans to exploit distributed manufacturing to secure back-up supply chains for future emergency situations. If applied generally, the concept of distributed manufacturing could give rise to “21st century cottage industries” or “nanofactories,” where high-tech goods are produced locally in small batches