223 research outputs found

    Coherent Storage of Temporally Multimode Light Using a Spin-Wave Atomic Frequency Comb Memory

    Full text link
    We report on coherent and multi-temporal mode storage of light using the full atomic frequency comb memory scheme. The scheme involves the transfer of optical atomic excitations in Pr3+:Y2SiO5 to spin-waves in the hyperfine levels using strong single-frequency transfer pulses. Using this scheme, a total of 5 temporal modes are stored and recalled on-demand from the memory. The coherence of the storage and retrieval is characterized using a time-bin interference measurement resulting in visibilities higher than 80%, independent of the storage time. This coherent and multimode spin-wave memory is promising as a quantum memory for light.Comment: 17 pages, 5 figure

    A solid state spin-wave quantum memory for time-bin qubits

    Get PDF
    We demonstrate the first solid-state spin-wave optical quantum memory with on-demand read-out. Using the full atomic frequency comb scheme in a \PrYSO crystal, we store weak coherent pulses at the single-photon level with a signal to noise ratio >10> 10. Narrow-band spectral filtering based on spectral hole burning in a second \PrYSO crystal is used to filter out the excess noise created by control pulses to reach an unconditional noise level of (2.0±0.3)×103(2.0 \pm 0.3) \times10^{-3} photons per pulse. We also report spin-wave storage of photonic time-bin qubits with conditional fidelities higher than a measure and prepare strategy, demonstrating that the spin-wave memory operates in the quantum regime. This makes our device the first demonstration of a quantum memory for time-bin qubits, with on demand read-out of the stored quantum information. These results represent an important step for the use of solid-state quantum memories in scalable quantum networks.Comment: 10 pages, 10 figure

    Frequency-Bin Entanglement of Ultra-Narrow Band Non-Degenerate Photon Pairs

    Full text link
    We demonstrate frequency-bin entanglement between ultra-narrowband photons generated by cavity enhanced spontaneous parametric down conversion. Our source generates photon pairs in widely non-degenerate discrete frequency modes, with one photon resonant with a quantum memory material based on praseodymium doped crystals and the other photon at telecom wavelengths. Correlations between the frequency modes are analyzed using phase modulators and narrowband filters before detection. We show high-visibility two photon interference between the frequency modes, allowing us to infer a coherent superposition of the modes. We develop a model describing the state that we create and use it to estimate optimal measurements to achieve a violation of the Clauser-Horne (CH) Bell inequality under realistic assumptions. With these settings we perform a Bell test and show a significant violation of the CH inequality, thus proving the entanglement of the photons. Finally we demonstrate the compatibility with a quantum memory material by using a spectral hole in the praseodymium (Pr) doped crystal as spectral filter for measuring high-visibility two-photon interference. This demonstrates the feasibility of combining frequency-bin entangled photon pairs with Pr-based solid state quantum memories.Comment: 15 pages, 6 figure

    Storage of up-converted telecom photons in a doped crystal

    Full text link
    We report on an experiment that demonstrates the frequency up-conversion of telecommunication wavelength single-photon-level pulses to be resonant with a Pr3+\mathrm{Pr}^{3+}:Y2SiO5\mathrm{Y}_2\mathrm{Si}\mathrm{O}_5 crystal. We convert the telecom photons at 1570nm1570\,\mathrm{nm} to 606nm606\,\mathrm{nm} using a periodically-poled potassium titanyl phosphate nonlinear waveguide. The maximum device efficiency (which includes all optical loss) is inferred to be ηdevmax=22±1\eta_{\mathrm{dev}}^{\mathrm{max}} = 22 \pm 1\,% (internal efficiency ηint=75±8\eta_{\mathrm{int}} = 75\pm8\,%) with a signal to noise ratio exceeding 1 for single-photon-level pulses with durations of up to 560\,ns. The converted light is then stored in the crystal using the atomic frequency comb scheme with storage and retrieval efficiencies exceeding ηAFC=20\eta_{\mathrm{AFC}} = 20\,% for predetermined storage times of up to 5μs5\,\mu\mathrm{s}. The retrieved light is time delayed from the noisy conversion process allowing us to measure a signal to noise ratio exceeding 100 with telecom single-photon-level inputs. These results represent the first demonstration of single-photon-level optical storage interfaced with frequency up-conversion

    A spectral hole memory for light at the single photon level

    Get PDF
    We demonstrate a solid state spin-wave optical memory based on stopped light in a spectral hole. A long lived narrow spectral hole is created by optical pumping in the inhomogeneous absorption profile of a Pr3+^{3+}:Y2_2SiO5_5 crystal. Optical pulses sent through the spectral hole experience a strong reduction of their group velocity and are spatially compressed in the crystal. A short Raman pulse transfers the optical excitation to the spin state before the light pulse exits the crystal, effectively stopping the light. After a controllable delay, a second Raman pulse is sent, which leads to the emission of the stored photons. We reach storage and retrieval efficiencies for bright pulses of up to 39%39\,\% in a 5mm5 \,\mathrm{mm}-long crystal. We also show that our device works at the single photon level by storing and retrieving 3μs3\,\mathrm{\mu s}-long weak coherent pulses with efficiencies up to 31%31\,\%, demonstrating the most efficient spin-wave solid state optical memory at the single-photon level so far. We reach an unconditional noise level of (9±1)×103(9\pm1)\times 10^{-3} photons per pulse in a detection window of 4μs4\,\mathrm{\mu s} leading to a signal-to-noise ratio of 33±433 \pm 4 for an average input photon number of 1, making our device promising for long-lived storage of non-classical light.Comment: 5 pages, 4 figure

    High resolution spectroscopy to investigate impurities in YAB single crystals

    Get PDF
    The work explores the feasibility of high resolution (as fine as 0.02 cm-1) Fourier transform spectroscopy applied at 9 K in the 500-25000 cm-1 range to detect traces of unwanted impurities, mainly rare earths (RE3+) in crystals: the system chosen is YAl3(BO3)4 (YAB). Weak traces of RE3+ (Nd, Dy, Er, Tm, Yb), but also of Cr3+ and OH-, were successfully monitored by comparing the spectra of YAB samples under examination with those intentionally doped with a given ion. The analysis performed on a variety of samples shows how Cr3+, Nd3+, and Yb3+ are the most frequent unwanted dopants and can provide suggestions to the crystal growers about the performances of different crystal growth lines. According to a preliminary evaluation, the Er3+ traces detection limit is as low as 1-2x10-4 mol% in 1 cm thick samples. The advantages of the method, which is sample non-destructive, are discussed in comparison with those currently applied
    corecore