20 research outputs found

    Collection and direct amplification methods using the GlobalFiler™ kit for DNA recovered from common pipe bomb substrates

    Get PDF
    When analyzing DNA from exploded pipe bombs, quantities are often in trace amounts, making DNA typing extremely difficult. Amplifying minute amounts of DNA can cause stochastic effects resulting in partial or uninterpretable profiles. Therefore, the initial DNA collection from “touch” evidence must be optimized to maximize the amount of DNA available for analysis. This proof-of-concept study evaluated two different swab types with two direct amplification strategies to identify the most effective method for recovering DNA from common pipe bomb substrates. PVC and steel pipes, electrical tape, and copper wire spiked with epithelial cells were swabbed with cotton or microFLOQ® Direct Swabs and amplified directly or via a pre-treatment prior to STR amplification. Not only was the microFLOQ® Direct Swab protocol the quickest method with the least risk of contamination, but in combination with direct amplification, the microFLOQ® Direct Swabs also generated the most complete STR profiles

    Retrospective evaluation of whole exome and genome mutation calls in 746 cancer samples

    No full text
    Funder: NCI U24CA211006Abstract: The Cancer Genome Atlas (TCGA) and International Cancer Genome Consortium (ICGC) curated consensus somatic mutation calls using whole exome sequencing (WES) and whole genome sequencing (WGS), respectively. Here, as part of the ICGC/TCGA Pan-Cancer Analysis of Whole Genomes (PCAWG) Consortium, which aggregated whole genome sequencing data from 2,658 cancers across 38 tumour types, we compare WES and WGS side-by-side from 746 TCGA samples, finding that ~80% of mutations overlap in covered exonic regions. We estimate that low variant allele fraction (VAF < 15%) and clonal heterogeneity contribute up to 68% of private WGS mutations and 71% of private WES mutations. We observe that ~30% of private WGS mutations trace to mutations identified by a single variant caller in WES consensus efforts. WGS captures both ~50% more variation in exonic regions and un-observed mutations in loci with variable GC-content. Together, our analysis highlights technological divergences between two reproducible somatic variant detection efforts

    Development and Evaluation of miRNA and mRNA Panels for Body Fluid Identification

    Get PDF
    The attribution of biological material to a tissue source, also known as body fluid identification (BFID), can aid investigators in corroborating statements and in the reconstruction of events. Chemical tests, microscopy, enzymatic activity, and immunochromatographic tests are widely employed in crime laboratories at present but have a high false-positive rate and interpretations are often subject to conjecture. Forensic testing requires a methodology that can analyze low level and challenging samples with high specificity. While several molecular targets have been considered for BFID, this project explores the use of microRNA (miRNA) and messenger RNA (mRNA) for BFID. The results of this study provide the forensic community with information on the performance of miRNA and mRNA for BFID using capillary electrophoresis (CE), quantitative reverse transcription PCR (RT-qPCR), and massively parallel sequencing (MPS) technologies, particularly for challenging samples. In the first study, an eight-marker miRNA multiplex was developed for capillary electrophoresis using a linear primer system. Markers were chosen to identify venous blood, menstrual blood, semen, saliva, as well as an endogenous reference gene. Reverse transcription and PCR primers were developed for each marker, evaluated in singleplex, and then multiplexed. Each fluid were co-extracted (DNA/RNA) and amplified with STR and miRNA multiplexes, respectively. All DNA profiles were complete and miRNA profiles correctly identified the body fluid using a decision tree-based interpretation strategy. In the second study, the stability and persistence of miRNA and mRNA was evaluated in challenging samples. Custom reverse transcription quantitative PCR (RT-qPCR) assays were performed to detect the presence of miRNA and mRNA in samples. mRNA targets and miRNA targets were chosen for blood, semen, and an endogenous reference gene respectively. For the evaluation of these markers over time, blood and semen samples were placed in a glass enclosed area exposed to natural heat, humidity, and UV light as well as controlled conditions in a lab cabinet (room temperature, low humidity, and darkness) for up to six months. mRNA was undetected in experimental samples after 30 days, while control mRNA and all miRNA transcripts were detected for the duration of the experiment. A persistence study was also performed by laundering blood and semen stained swatches and either machine drying or allowing the samples to air dry. Blood specific markers were detected in all bloodstained samples, while semen specific markers were observed in all but one semen stained sample. Transfer of both miRNA and mRNA was observed by taking an unstained portion of the swatch. In the final study, an early access mRNA panel for BFID was evaluated. Samples of venous blood, menstrual blood, semen, saliva, and vaginal secretions were placed in a variety of challenging conditions including outside with and without exposure to direct precipitation, buried, on a decomposing cadaver, laundered, aged, and post-coital samples. Co-extracted DNA profiles were evaluated, and RNA was successfully extracted and typed in most samples. Reverse transcription negatives, total reads, and composition of reads attributed to body fluid specific markers were used to evaluate the performance of the panel. Based on the results of the study, potential areas for improvement were highlighted; however, the performance of the panel overall is encouraging

    Comparative sensitivity and inhibitor tolerance of GlobalFiler® PCR Amplification and Investigator® 24plex QS kits for challenging samples

    No full text
    In cases such as mass disasters or missing persons, human remains are challenging to identify as they may be fragmented, burnt, been buried, decomposed, and/or contain inhibitory substances. This study compares the performance of a relatively new STR kit in the US market (Investigator® 24plex QS kit; Qiagen) with the GlobalFiler® PCR Amplification kit (Thermo Fisher Scientific) when genotyping highly inhibited and low level DNA samples. In this study, DNA samples ranging from 1 ng to 7.8 pg were amplified to define the sensitivity of two systems. In addition, DNA (1 ng and 0.1 ng input amounts) was spiked with various concentrations of five inhibitors common to human remains (humic acid, melanin, hematin, collagen, calcium). Furthermore, bone (N = 5) and tissue samples from decomposed human remains (N = 6) were used as mock casework samples for comparative analysis with both STR kits. The data suggest that the GlobalFiler® kit may be slightly more sensitive than the Investigator® kit. On average STR profiles appeared to be more balanced and average peak heights were higher when using the GlobalFiler® kit. However, the data also show that the Investigator® kit may be more tolerant to common PCR inhibitors. While both STR kits showed a decrease in alleles as the inhibitor concentration increased, more complete profiles were obtained when the Investigator® kit was used. Of the 11 bone and decomposed tissue samples tested, 8 resulted in more complete and balanced STR profiles when amplified with the GlobalFiler® kit

    Evaluation of a powder-free DNA extraction method for skeletal Remains

    No full text
    Bones are often recovered in forensic investigations, including missing persons and mass disasters. While traditional DNA extraction methods rely on grinding bone into powder prior to DNA purification, the TBone Ex buffer (DNA Chip Research Inc.) digests bone chips without powdering. In this study, six bones were extracted using the TBone Ex kit in conjunction with the PrepFiler BTA™ DNA extraction kit (Thermo Fisher Scientific) both manually and via an automated platform. Comparable amounts of DNA were recovered from a 50 mg bone chip using the TBone Ex kit and 50 mg of powdered bone with the PrepFiler BTA™ kit. However, automated DNA purification decreased DNA yield (p < 0.05). Nevertheless, short tandem repeat (STR) success was comparable across all methods tested. This study demonstrates that digestion of whole bone fragments is an efficient alternative to powdering bones for DNA extraction without compromising downstream STR profile quality

    Massively parallel sequencing of 12 autosomal STRs in Cannabis sativa

    No full text
    Massively parallel sequencing (MPS) is an emerging technology in the field of forensic genetics that provides distinct advantages compared to capillary electrophoresis. This study offers a proof of concept that MPS technologies can be applied to genotype autosomal STRs in Cannabis sativa. A custom panel for MPS was designed to interrogate 12 cannabis-specific STR loci by sequence rather than size. A simple workflow was implemented to integrate the custom PCR multiplex into a workflow compatible with the Ion Plus Fragment Library Kit, Ion Chef, and Ion S5 System. For data sorting and sequence analysis, a custom configuration file was designed for STRait Razor v3 to parse and extract STR sequence data. This study represents a preliminary investigation of sequence variation for 12 autosomal STR loci in 16 cannabis samples. Full concordance was observed between the MPS and CE data. Results revealed intra-repeat variation in eight loci where the nominal or size-based allele was identical, but variances were discovered in the sequence of the flanking region. Although only a small number of cannabis samples were evaluated, this study demonstrates that more informative STR data can be obtained via MPS

    The stability and persistence of blood and semen mRNA and miRNA targets for body fluid identification in environmentally challenged and laundered samples

    No full text
    The identification of body fluids in evidentiary stains may provide investigators with probative information during an investigation. In this study, quantitative reverse transcription polymerase chain reaction (RT-qPCR) assays were performed to detect the presence of mRNA and miRNA in fresh and environmentally challenged samples. Blood, semen, and reference markers were chosen for both mRNA/miRNA testing. Samples of blood and semen were exposed to heat, humidity, and sunlight, and controlled conditions (room temperature, low humidity, and darkness) for 6 months. All mRNA targets were observed through six months under controlled conditions, but were undetected after 30 days in experimental conditions. However, miRNA targets persisted under all test conditions for the duration of the study. Additionally, cotton stained with blood or semen was laundered using a liquid detergent in various washing and drying conditions. An unstained cutting was evaluated for potential transfer. Both miRNA targets were observed in all stained samples regardless of the wash protocol used. Of the mRNA markers, HBB was detected in all bloodstained samples and PRM1 persisted in all but one semen stained sample. The unstained samples showed transfer of at least one body fluid specific miRNA marker in all samples and at least one body fluid specific mRNA in approximately half of the samples. These results support that RNA markers can be used for body fluid identification in challenging samples, and that miRNA markers may be more persistent than mRNA for blood and semen stains. However, some caution is warranted with laundered items due to possible transfer
    corecore