[Pd(2‐pymo)₂]n/Al₂O₃ as MOF Single Site Catalyst for the Selective Hydrogenation of Acetylene

Despite the great potential of metal-organic frameworks (MOFs) in catalysis, industrial applications are still scarce. This is mainly due to a lack of performance when changing from idealized lab conditions towards realistic conditions of the actual application. In this work, we demonstrate the applicability and outstanding catalytic performance of an alumina-supported [Pd(2-pymo)₂]n MOF catalyst in the selective hydrogenation of acetylene to ethylene under industrial front-end conditions. It shows a competitive performance to an industrial benchmark catalyst and even exceeds it in terms of ethane selectivity due to the combination of well-defined isolated Pd active sites and synergies due to MOF-support-interactions. The high stability was proven for up to 60 h time-on-stream and supported by XPS and XRD structural analysis

On the Surface Modification of LLZTO with LiF via a Gas-Phase Approach and the Characterization of the Interfaces of LiF with LLZTO as Well as PEO+LiTFSI

In this study we present gas-phase fluorination as a method to create a thin LiF layer on Li₆.₅La₃Zr₁.₅Ta₀.₅O₁₂ (LLZTO). We compared these fluorinated films with LiF films produced by RF-magnetron sputtering, where we investigated the interface between the LLZTO and the deposited LiF showing no formation of a reaction layer. Furthermore, we investigated the ability of this LiF layer as a protection layer against Li₂CO₃ formation in ambient air. By this, we show that Li₂CO₃ formation is absent at the LLZTO surface after 24 h in ambient air, supporting the protective character of the formed LiF films, and hence potentially enhancing the handling of LLZTO in air for battery production. With respect to the use within hybrid electrolytes consisting of LLZTO and a mixture of polyethylene oxide (PEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), we also investigated the interface between the formed LiF films and a mixture of PEO+LiTFSI by X-ray photoelectron spectroscopy (XPS), showing decomposition of the LiTFSI at the interface

Multi-scale Designed CoxMn3–xO4 Spinels : Smart Pre-Catalysts towards High-Efficiency Pyrolysis-Catalysis Recycling of Waste Plastics

Acknowledgements M. W. and A. W. highly acknowledge the funding by the German Federal Ministry of Education and Research (BMBF) within the NexPlas project (project number: 03SF0618B). Y. S. Z is grateful for financial supports provided by the Royal Society of Chemistry Enablement Grant (E21-5819318767) and Royal Society of Chemistry Mobility Grant (M19-2899).Peer reviewedPostprin

Tapered Cross Section Photoelectron Spectroscopy Provides Insights into the Buried Interfaces of III‐V Semiconductor Devices

Interfaces are key elements that define electronic properties of the final device. Inevitably, most of the active interfaces of III–V semiconductor devices are buried and it is therefore not straightforward to characterize them. The Tapered Cross Section Photoelectron Spectroscopy (TCS‐PES) approach is promising to address such a challenge. That the TCS‐PES can be used to study the relevant heterojunction in epitaxial III–V architectures prepared by metalorganic chemical vapor deposition is demonstrated here. A MULTIPREP polishing system that enables controlling the angle between the sample holder and the polishing plate has been employed to improve the reproducibility of the polishing procedure. With this procedure, that preparing the TCS of III–V semiconductor devices with tapering angles lower than 0.02° is possible is demonstrated. The PES provides then information about the buried interfaces of Ge|GaInP and GaAs|GaInP layer stacks. Both, chemical and electronic properties have been measured by PES. It evidences that the preparation of the TCSs under an uncontrolled atmosphere modifies the pristine properties of the critical buried heterointerfaces. Surface states and reaction layers are created on the TCS surface, which restrict unambiguous conclusions on buried interface energetics

Sol‐Gel‐Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance

The novel material class of high entropy oxides with their unique and unexpected physicochemical properties is a candidate for energy applications. Herein, it is reported for the first time about the physico‐ and (photo‐) electrochemical properties of ordered mesoporous (CoNiCuZnMg)Fe₂O₄ thin films synthesized by a soft‐templating and dip‐coating approach. The A‐site high entropy ferrites (HEF) are composed of periodically ordered mesopores building a highly accessible inorganic nanoarchitecture with large specific surface areas. The mesoporous spinel HEF thin films are found to be phase‐pure and crack‐free on the meso‐ and macroscale. The formation of the spinel structure hosting six distinct cations is verified by X‐ray‐based characterization techniques. Photoelectron spectroscopy gives insight into the chemical state of the implemented transition metals supporting the structural characterization data. Applied as photoanode for photoelectrochemical water splitting, the HEFs are photostable over several hours but show only low photoconductivity owing to fast surface recombination, as evidenced by intensity‐modulated photocurrent spectroscopy. When applied as oxygen evolution reaction electrocatalyst, the HEF thin films possess overpotentials of 420 mV at 10 mA cm⁻² in 1 m KOH. The results imply that the increase of the compositional disorder enhances the electronic transport properties, which are beneficial for both energy applications

Sex difference and intra-operative tidal volume: Insights from the LAS VEGAS study

BACKGROUND: One key element of lung-protective ventilation is the use of a low tidal volume (VT). A sex difference in use of low tidal volume ventilation (LTVV) has been described in critically ill ICU patients.OBJECTIVES: The aim of this study was to determine whether a sex difference in use of LTVV also exists in operating room patients, and if present what factors drive this difference.DESIGN, PATIENTS AND SETTING: This is a posthoc analysis of LAS VEGAS, a 1-week worldwide observational study in adults requiring intra-operative ventilation during general anaesthesia for surgery in 146 hospitals in 29 countries.MAIN OUTCOME MEASURES: Women and men were compared with respect to use of LTVV, defined as VT of 8 ml kg-1 or less predicted bodyweight (PBW). A VT was deemed 'default' if the set VT was a round number. A mediation analysis assessed which factors may explain the sex difference in use of LTVV during intra-operative ventilation.RESULTS: This analysis includes 9864 patients, of whom 5425 (55%) were women. A default VT was often set, both in women and men; mode VT was 500 ml. Median [IQR] VT was higher in women than in men (8.6 [7.7 to 9.6] vs. 7.6 [6.8 to 8.4] ml kg-1 PBW, P < 0.001). Compared with men, women were twice as likely not to receive LTVV [68.8 vs. 36.0%; relative risk ratio 2.1 (95% CI 1.9 to 2.1), P < 0.001]. In the mediation analysis, patients' height and actual body weight (ABW) explained 81 and 18% of the sex difference in use of LTVV, respectively; it was not explained by the use of a default VT.CONCLUSION: In this worldwide cohort of patients receiving intra-operative ventilation during general anaesthesia for surgery, women received a higher VT than men during intra-operative ventilation. The risk for a female not to receive LTVV during surgery was double that of males. Height and ABW were the two mediators of the sex difference in use of LTVV.TRIAL REGISTRATION: The study was registered at Clinicaltrials.gov, NCT01601223

Resolving a structural issue in cerium-nickel-based oxide

CeNiO3 has been reported in the literature in the last few years as a novel LnNiO3 compound with promising applications in different catalytic fields, but its structure has not been correctly reported so far. In this research, CeNiO3 (RB1), CeO2 and NiO have been synthesized in a nanocrystalline form using a modified citrate aqueous sol-gel route. A direct comparison between the equimolar physical mixture (n(CeO2) : n(NiO) = 1:1) and a compound RB1 was made. Their structural differences were investigated by laboratory powder X-ray diffraction (PXRD), selected area electron diffraction (SAED), transmission electron microscopy (TEM) with energy-dispersive X-ray spectroscopy detector (EDS), and Raman spectroscopy. The surface of the compounds was analyzed by X-ray photoelectron spectroscopy (XPS), while the thermal behaviour was explored by thermogravimetric analysis (TGA). Their magnetic properties were also investigated with the aim of exploring the differences between these two compounds. There were clear differences between the physical mixture of CeO2 + NiO and RB1 presented by all of these employed methods. Synchrotron methods, such as atomic pair distribution function analysis (PDF), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) were used to explore the structure of RB1 in more detail. Three different models for the structural solution of RB1 were proposed. One structural solution proposes that RB1 is a single-phase pyrochlore compound (Ce2Ni2O7) while the other two solutions suggest that RB1 is a two-phase system of either CeO2 + NiO or Ce1–xNixO2 and NiO

[Pd(2-pymo)2]n/Al2O3 as MOF single site catalyst for the selective hydrogenation of acetylene

Despite the great potential of metal-organic frameworks (MOFs) in catalysis, industrial applications are still scarce. This is mainly due to a lack of performance when changing from idealized lab conditions towards realistic conditions of the actual application. In this work, we demonstrate the applicability and outstanding catalytic performance of an alumina-supported [Pd(2-pymo)2]n MOF catalyst in the selective hydrogenation of acetylene to ethylene under industrial front-end conditions. It shows a competitive performance to an industrial benchmark catalyst and even exceeds it in terms of ethane selectivity due to the combination of well-defined isolated Pd active sites and synergies due to MOF-support-interactions. The high stability was proven for up to 60 h time-on-stream and supported by XPS and XRD structural analysis