Anisotropic fluid spheres of embedding class one using Karmarkar condition

We obtain a new anisotropic solution for spherically symmetric spacetimes by analysing of the Karmarkar embedding condition. For this purpose we construct a suitable form of one of the gravitational potentials to obtain a closed form solution. This form of the remaining gravitational potential allows us to solve the embedding equation and integrate the field equations. The resulting new anisotropic solution is well behaved which can be utilized to construct realistic static fluid spheres. Also we estimated masses and radii of fluid spheres for LMC X-4 and EXO 1785-248 by using observational data sets values. The obtained masses and radii show that our anisotropic solution can represent fluid spheres to a very good degree of accuracy.Comment: 16 pages, 11 figure

Evaluation of thiamethoxam 70% WS as seed treatment against early sucking pests of tomato

The present investigation was carried out at Vegetable Research Centre, G. B. Pant University of Agriculture and Technology, Pantnagar, Uttarakhand during the 2013 and 2014 to evaluate the effectiveness of thiamethoxam, used as seed treatment against the sucking insects of tomato. The seed treatment with thiamethoxam protected tomato seedlings from aphids and thrips at the early season from the onset of seed planting. There was a fast initial effect against the pests then gradually decreased to reach a moderate effect. Data revealed that Thiamethoxam 70% WS @ 4.2 g a.i./kg of seed showed the significant pest reduction followed by Thiamethoxam 70% WS @ 3.85 g a.i./kg of seed. Highest yield was recorded by Thiamethoxam 70% WS @ 4.2 g a.i./kg of seed (28.25 t/ha) closely followed by Thiamethoxam 70% WS @ 3.85 g a.i./kg of seed (25.00 t/ha) as compared to untreated check (20.91t/ha). Percent increase in yield over control was highest (35.10%) in Thiamethoxam 70% WS @ 4.2 g a.i./kg of seed followed by Thiamethoxam 70% WS @ 3.85 g a.i./kg of seed (19.56%). The percent reductions of predators by Thiamethoxam, used as seed treatment, in both the seasons ranged from 1.65- 2.58% which was very minimum. Hence, it was concluded that the seed treatment of tomato with Thiamethoxam 70% WS @ 4.20 g a.i/kg of seed reduced the early season insect-pests (aphid and thrips) and had very less effect of natural enemies population ascompared to control and also increased the fruit yield significantly than other treatments

Au9+ swift heavy ion irradiation of Zn[CS(NH2)2]3SO4 crystal: Crystalline perfection and optical properties

The single crystal of tris(thiourea)zinc sulphate (Zn[CS(NH2)2]3SO4) was irradiated by 150 MeV Au9+ swift heavy ions and analyzed in comparison with pure crystal for crystalline perfection and optical properties. The Fourier transform infrared and x-ray powder diffraction inferred that swift ions lead the disordering and breaking of molecular bonds in lattice without formation of new structural phases. High resolution X-ray diffraction (HRXRD) revealed the abundance of point defects, and formation of mosaics and low angle grain boundaries in the irradiated region of crystal. The swift ion irradiation found to affect the lattice vibrational modes and functional groups significantly. The defects induced by heavy ions act as the color centers and resulted in enhance of photoluminescence emission intensity. The optical transparency and band gap found to be decreased.Comment: 7 page

Tetramer Orbital-Ordering induced Lattice-Chirality in Ferrimagnetic, Polar MnTi2O4

Using density-functional theory calculations and experimental investigations on structural, magnetic and dielectric properties, we have elucidated a unique tetragonal ground state for MnTi2O4, a Ti^{3+} (3d^1)-ion containing spinel-oxide. With lowering of temperature around 164 K, cubic MnTi2O4 undergoes a structural transition into a polar P4_1 tetragonal structure and at further lower temperatures, around 45 K, the system undergoes a paramagnetic to ferrimagnetic transition. Magnetic superexchange interactions involving Mn and Ti spins and minimization of strain energy associated with co-operative Jahn-Teller distortions plays a critical role in stabilization of the unique tetramer-orbital ordered ground state which further gives rise to lattice chirality through subtle Ti-Ti bond-length modulations

Highly c-axis oriented growth of GaN film on sapphire (0001) by laser molecular beam epitaxy using HVPE grown GaN bulk target

Growth temperature dependant surface morphology and crystalline properties of the epitaxial GaN layers grown on pre-nitridated sapphire (0001) substrates by laser molecular beam epitaxy (LMBE) were investigated in the range of 500-750 degrees C. The grown GaN films were characterized using high resolution x-ray diffraction, atomic force microscopy (AFM), micro-Raman spectroscopy, and secondary ion mass spectroscopy (SIMS). The x-ray rocking curve full width at a half maximum (FWHM) value for (0002) reflection dramatically decreased from 1582 arc sec to 153 arc sec when the growth temperature was increased from 500 degrees C to 600 degrees C and the value further decreased with increase of growth temperature up to 720 degrees C. A highly c-axis oriented GaN epitaxial film was obtained at 720 degrees C with a (0002) plane rocking curve FWHM value as low as 102 arc sec. From AFM studies, it is observed that the GaN grain size also increased with increasing growth temperature and flat, large lateral grains of size 200-300 nm was obtained for the film grown at 720 degrees C. The micro-Raman spectroscopy studies also exhibited the high-quality wurtzite nature of GaN film grown on sapphire at 720 degrees C. The SIMS measurements revealed a non-traceable amount of background oxygen impurity in the grown GaN films. The results show that the growth temperature strongly influences the surface morphology and crystalline quality of the epitaxial GaN films on sapphire grown by LMBE

Mechanical, Electrical and Thermal Properties of Nylon-66/Flyash Composites: Effect of Flyash

In the current study, the effect of flyash (FA) on the physic-mechanical, electrical, thermal and morphological behavior of nylon-66 (PA) was investigated. PA/FA composites were prepared by melt mixing via twin screw extruder, with varying weight percent (5 wt %, 10 wt %, 15 wt % and 20 wt %) of flyash. The results of composites were optimized and compared with virgin nylon-66. Mechanical and electrical properties of composites improved up to 10 wt% of FA loading without compromising the properties. The flyash filled nylon-66 composites showed a low abrasive wear rate. Increase the heat distortion temperature of composites with an increase in weight percent of flyash while opposing the melt flow rate. Flyash filler enhances the stiffness of plastics but significantly reduces the impact properties. Dispersion of flyash was examined by impact fracture surface of composites using a scanning electron microscope

HICF: A MATLAB PACKAGE FOR HYPERSPECTRAL IMAGE CLASSIFICATION AND FUSION FOR EDUCATIONAL LEARNING AND RESEARCH

A significant surge has been observed with the development and research in remote sensing in recent years for hyperspectral applications in Earth observation. Subsequently, the development of software and tools have also experienced an unprecedented rise, both in research as well as in academia. Although commercial software and tools such as ENVI by ITT Visual Information Solutions, Boulder, CO, USA are available for visualizing and analyzing the hyperspectral images, such software are expensive. Some open source toolboxes such as the MATLAB-based Hyperspectral Image Analysis Toolbox (HIAT) are also available. However, mostly these toolboxes have not been packaged for dissemination and operation without the MATLAB software which is commercial. In this paper, we introduce the Hyperspectral Image Classification and Fusion (HICF) package which is being developed at the Geoinformatics laboratory, Department of Civil Engineering, Indian Institute of Technology Kanpur (IITK) in MATLAB that can be used by standalone installation with an open source supplementary MATLAB compiler. This software is intended to provide a collection of algorithms both conventional and those developed at the Geoinformatics laboratory that utilizes the numerical computing capability of MATLAB for the processing of hyperspectral and multispectral imagery. The HICF software comprises a simple design of the graphical user interface which can be efficiently used particularly for academic purposes

Tracing the Vedic Saraswati River in the Great Rann of Kachchh

© The Author(s), 2017. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Scientific Reports 7 (2017): 5476, doi:10.1038/s41598-017-05745-8.The lost Saraswati River mentioned in the ancient Indian tradition is postulated to have flown independently of the Indus River into the Arabian Sea, perhaps along courses of now defunct rivers such as Ghaggar, Hakra and Nara. The persistence of such a river during the Harappan Bronze Age and the Iron Age Vedic period is strongly debated. We drilled in the Great Rann of Kachchh (Kutch), an infilled gulf of the Arabian Sea, which must have received input from the Saraswati, if active. Nd and Sr isotopic measurements suggest that a distinct source may have been present before 10 ka. Later in Holocene, under a drying climate, sediments from the Thar Desert probably choked the signature of an independent Saraswati-like river. Alternatively, without excluding a Saraswati-like secondary source, the Indus and the Thar were the dominant sources throughout the post-glacial history of the GRK. Indus-derived sediment accelerated the infilling of GRK after ~6 ka when the Indus delta started to grow. Until its complete infilling few centuries ago, freshwater input from the Indus, and perhaps from the Ghaggar-Hakra-Nara, probably sustained a productive marine environment as well as navigability toward old coastal Harappan and historic towns in the region.The drilling effort and subsequent study of the cores was funded by Department of Science and Technology (DST), Government of India sponsored research project to DMM (Project No. SR/S4/ES-21/Kachchh Window/P1) under the science of Shallow Subsurface Programme (SSS). N. Khonde gratefully acknowledges Indo-US Post-doctoral Fellowship sponsored by SERB-IUSSTF for research work at Woods Hole Oceanographic Institution

TMEM16A calcium-activated chloride currents in supporting cells of the mouse olfactory epithelium

Glial-like supporting (or sustentacular) cells are important constituents of the olfactory epithelium that are involved in several physiological processes such as production of endocannabinoids, insulin, and ATP and regulation of the ionic composition of the mucus layer that covers the apical surface of the olfactory epithelium. Supporting cells express metabotropic P2Y purinergic receptors that generate ATP-induced Ca2+ signaling through the activation of a PLC-mediated cascade. Recently, we reported that a subpopulation of supporting cells expresses also the Ca2+-activated Cl- channel TMEM16A. Here, we sought to extend our understanding of a possible physiological role of this channel in the olfactory system by asking whether Ca2+ can activate Cl- currents mediated by TMEM16A. We use whole-cell patch-clamp analysis in slices of the olfactory epithelium to measure dose-response relations in the presence of various intracellular Ca2+ concentrations, ion selectivity, and blockage. We find that knockout of TMEM16A abolishes Ca2+-activated Cl- currents, demonstrating that TMEM16A is essential for these currents in supporting cells. Also, by using extracellular ATP as physiological stimuli, we found that the stimulation of purinergic receptors activates a large TMEM16A-dependent Cl- current, indicating a possible role of TMEM16A in ATP-mediated signaling. Altogether, our results establish that TMEM16A-mediated currents are functional in olfactory supporting cells and provide a foundation for future work investigating the precise physiological role of TMEM16A in the olfactory system