11,124 research outputs found
Effect of injection depth of digestate liquid fraction on soil carbon dioxide emission and maize biomass production
The aim of this study was to evaluate, in open field conditions, the effect of injection depth of digestate liquid fraction (10 cm, 25 cm and 35 cm) in clay loam soil, on CO2 emission. An un-amended soil was considered as control. The study was performed in 2014 on a farm located in Terrasa Padovana, Veneto region (Italy) distributing digestate before maize sowing. Digestate injection determined a high soil CO2 emission in the first
hour after application, followed by a progressive reduction in as early as 24 h, reaching significantly lower values, similar to those measured in the un-amended control, after 48 h. Gas emissions measured 1 h
after digestate application decreased as injection depth increased with significantly higher emission values in the 10 cm treatment (median value 23.7 g CO2 m\u20132 h\u20131) than in the 35 cm one (median value 2.5 g
CO2 m\u20132 h\u20131). In the 3 days between digestate distribution and maize sowing, soil CO2 emission was significantly higher in the amended treatments than un-amended one, with median values of 1.53 g CO2
m\u20132 h\u20131 and 0.46 g CO2 m\u20132 h\u20131 respectively. During maize growing season, no significant soil CO2 emission difference was monitored among treatments, with a median value of 0.33 g CO2 m\u20132 h\u20131. Digestate application significantly improved maize aboveground dry biomass with an average yield of 22.0 Mg ha\u20131 and 16.2 Mg ha\u20131 in amended and un-amended plots, respectively, due to the different amount of nutrients supplied
Constraints on the active tectonics of the Friuli/NW Slovenia area from CGPS measurements and three-dimensional kinematic modeling
We use site velocities from continuous GPS (CGPS) observations and kinematic
modeling to investigate the active tectonics of the Friuli/NW Slovenia area. Data from 42
CGPS stations around the Adriatic indicate an oblique collision, with southern Friuli
moving NNW toward northern Friuli at the relative speed of 1.6 to 2.2 mm/a. We
investigate the active tectonics using 3DMove, a three-dimensional kinematic model tool.
The model consists of one indenter-shaped fault plane that approximates the Adriatic
plate boundary. Using the ‘‘fault-parallel flow’’ deformation algorithm, we move the
hanging wall along the fault plane in the direction indicated by the GPS velocities. The
resulting strain field is used for structural interpretation. We identify a pattern of
coincident strain maxima and high vorticity that correlates well with groups of
hypocenters of major earthquakes (including their aftershocks) and indicates the
orientation of secondary, active faults. The pattern reveals structures both parallel and
perpendicular to the strike of the primary fault. In the eastern sector, which shows more
complex tectonics, these two sets of faults probably form an interacting strike-slip
system
Disease Progression Modeling and Prediction through Random Effect Gaussian Processes and Time Transformation
The development of statistical approaches for the joint modelling of the
temporal changes of imaging, biochemical, and clinical biomarkers is of
paramount importance for improving the understanding of neurodegenerative
disorders, and for providing a reference for the prediction and quantification
of the pathology in unseen individuals. Nonetheless, the use of disease
progression models for probabilistic predictions still requires investigation,
for example for accounting for missing observations in clinical data, and for
accurate uncertainty quantification. We tackle this problem by proposing a
novel Gaussian process-based method for the joint modeling of imaging and
clinical biomarker progressions from time series of individual observations.
The model is formulated to account for individual random effects and time
reparameterization, allowing non-parametric estimates of the biomarker
evolution, as well as high flexibility in specifying correlation structure, and
time transformation models. Thanks to the Bayesian formulation, the model
naturally accounts for missing data, and allows for uncertainty quantification
in the estimate of evolutions, as well as for probabilistic prediction of
disease staging in unseen patients. The experimental results show that the
proposed model provides a biologically plausible description of the evolution
of Alzheimer's pathology across the whole disease time-span as well as
remarkable predictive performance when tested on a large clinical cohort with
missing observations.Comment: 13 pages, 2 figure
Keeping watch over Colombia’s slumbering volcanoes
The Volcanological and Seismological Observatories of Manizales, Pasto and Popayan (Colombian Geological Survey) monitor and study the active volcanoes of Colombia using seismological, geodetic, geochemical and other techniques. Since 2009, permanent GNSS stations have been installed to complement classical geodetic measurements (e.g., tilt, EDM). At the moment, there are a total of 20 GNSS stations installed at Nevado del Ruiz, Cerro MachÃn, Puracé and Galeras volcanoes.
Nevado del Ruiz has remained the most dynamic of the active Colombian volcanoes since its tragic eruption of 13 November 1985. The most significant deformation occurred between 2007 and 2012, when inflation, associated with magma migration and several small to moderate explosive eruptions in 2012 (VEI less or equal to 3), was observed.
Galeras has experienced more than 25 moderate Vulcanian eruptions (VEI less or equal to 3) since 1989. In particular, the deformation network detected significant signals associated with magma migration and the extrusion of lava domes in 1991, 2005, 2008 and 2012.
Puracé volcano has been the site of more than 10 minor eruptive episodes (VEI=2) in the past century, most recently in 1977. Monitoring of this volcano started in 1994. Unrest at Puracé since that time has been characterized by significant increases in seismic activity but with little or no deformation.
We employ GAMIT/GLOBK to process GPS data from the monitoring network with support from the Volcano Disaster Assistance Program (U.S. Geological Survey). Additionally, differential processing is carried out using the commercial package Trimble 4D Control. Preliminary results for 2012 show no significant deformation at Puracé and Galeras volcanoes. On the other hand, the time series from Nevado del Ruiz shows a minor inflation (2-4 cm/yr) associated with the eruptive activity of 2012
Beyond Sparsity: Tree Regularization of Deep Models for Interpretability
The lack of interpretability remains a key barrier to the adoption of deep
models in many applications. In this work, we explicitly regularize deep models
so human users might step through the process behind their predictions in
little time. Specifically, we train deep time-series models so their
class-probability predictions have high accuracy while being closely modeled by
decision trees with few nodes. Using intuitive toy examples as well as medical
tasks for treating sepsis and HIV, we demonstrate that this new tree
regularization yields models that are easier for humans to simulate than
simpler L1 or L2 penalties without sacrificing predictive power.Comment: To appear in AAAI 2018. Contains 9-page main paper and appendix with
supplementary materia
Development and Validation of a Spontaneous Smile Assay
IMPORTANCE Smiling can be a voluntary or involuntarymovement. Facial reanimation procedures differ in their ability to restore a spontaneous smile, and an assay designed to evoke and evaluate a spontaneous smile is not available. OBJECTIVE To develop and validate an assay to assess the spontaneous smile of patients with facial paralysis. DESIGN, SETTING, AND PARTICIPANTS Thiswas an exploratory cohort study. A series of short video clips were administered to laypersons via an online survey service from January 1, 2014, to March 31, 2014. Respondents rated how funny each video was on a visual analog scale from 0 to 100. The 4 funniest videos were selected to generate a 11/2-minute spontaneous smile assay. The assay was then administered from July 1, 2014, to December 31, 2014, to 2 different study groups: the first was composed of 100 healthy individuals (control group) and the second was composed of 30 patients with facial paralysis.We analyzed the capability of this assay to provoke at least 1 spontaneous smile and calculated smile excursion in both groups. Statistical analysis was performed using analysis of variance. INTERVENTION Spontaneous smile assay administered to both healthy and diseased groups. MAIN OUTCOMES AND MEASURES Ability of the assay to elicit smiles, as defined by an oral commissure excursion greater than 3 mm, as well as difference in commissure excursion. RESULTS Ninety-five (95.0%) participants in the control group and 29 (96.7%) patients with facial paralysis experienced at least 1 oral commissure excursion that appeared to be a spontaneous smile while viewing the assay. Mean oral commissure excursion with spontaneous smile was 9.08mm(95%CI, 2.77-15.39) in controls, 6.72mm(95%CI, 3.13-10.31) on the healthy side in patients with flaccid facial paralysis (P=.004 vs controls), and 9.64mm(95%CI, 3.52-15.76) on the healthy side in patients with nonflaccid facial paralysis (P=.74). Among patients with flaccid facial paralysis, a statistically significant difference was found between smile excursion of the affected and the unaffected sides (P = .03). There was no statistically significant difference in the measurement between sides for the control group (P = .67). CONCLUSIONS AND RELEVANCE Although humor is a challenging construct to universalize, our assay was able to elicit a smile in almost all individuals in the group with facial paralysis and the control group. The spontaneous smile assay will facilitate future research on the ability of facial reanimation procedures and other interventions to restore a spontaneous smile
Design Solutions For Modular Satellite Architectures
The cost-effective access to space envisaged by ESA would open a wide range of new opportunities and markets, but is still many years ahead. There is still a lack of devices, circuits, systems which make possible to develop satellites, ground stations and related services at costs compatible with the budget of academic institutions and small and medium enterprises (SMEs). As soon as the development time and cost of small satellites will fall below a certain threshold (e.g. 100,000 to 500,000 €), appropriate business models will likely develop to ensure a cost-effective and pervasive access to space, and related infrastructures and services. These considerations spurred the activity described in this paper, which is aimed at: - proving the feasibility of low-cost satellites using COTS (Commercial Off The Shelf) devices. This is a new trend in the space industry, which is not yet fully exploited due to the belief that COTS devices are not reliable enough for this kind of applications; - developing a flight model of a flexible and reliable nano-satellite with less than 25,000€; - training students in the field of avionics space systems: the design here described is developed by a team including undergraduate students working towards their graduation work. The educational aspects include the development of specific new university courses; - developing expertise in the field of low-cost avionic systems, both internally (university staff) and externally (graduated students will bring their expertise in their future work activity); - gather and cluster expertise and resources available inside the university around a common high-tech project; - creating a working group composed of both University and SMEs devoted to the application of commercially available technology to space environment. The first step in this direction was the development of a small low cost nano-satellite, started in the year 2004: the name of this project was PiCPoT (Piccolo Cubo del Politecnico di Torino, Small Cube of Politecnico di Torino). The project was carried out by some departments of the Politecnico, in particular Electronics and Aerospace. The main goal of the project was to evaluate the feasibility of using COTS components in a space project in order to greatly reduce costs; the design exploited internal subsystems modularity to allow reuse and further cost reduction for future missions. Starting from the PiCPoT experience, in 2006 we began a new project called ARaMiS (Speretta et al., 2007) which is the Italian acronym for Modular Architecture for Satellites. This work describes how the architecture of the ARaMiS satellite has been obtained from the lesson learned from our former experience. Moreover we describe satellite operations, giving some details of the major subsystems. This work is composed of two parts. The first one describes the design methodology, solutions and techniques that we used to develop the PiCPoT satellite; it gives an overview of its operations, with some details of the major subsystems. Details on the specifications can also be found in (Del Corso et al., 2007; Passerone et al, 2008). The second part, indeed exploits the experience achieved during the PiCPoT development and describes a proposal for a low-cost modular architecture for satellite
Behavioural clusters and predictors of performance during recovery from stroke
We examined the patterns and variability of recovery post-stroke in multiple behavioral domains. A large cohort of first time stroke patients with heterogeneous lesions was studied prospectively and longitudinally at 1-2 weeks, 3 months and one year post-injury with structural MRI to measure lesion anatomy and in-depth neuropsychological assessment. Impairment was described at all timepoints by a few clusters of correlated deficits. The time course and magnitude of recovery was similar across domains, with change scores largely proportional to the initial deficit and most recovery occurring within the first three months. Damage to specific white matter tracts produced poorer recovery over several domains: attention and superior longitudinal fasciculus II/III, language and posterior arcuate fasciculus, motor and corticospinal tract. Finally, after accounting for the severity of the initial deficit, language and visual memory recovery/outcome was worse with lower education, while the occurrence of multiple deficits negatively impacted attention recovery
Natural zeolites and white wines from Campania region (Southern Italy): a new contribution for solving some oenological problems
The purpose of this research is to provide a new mixture of Campanian zeolitized tuffs for solving two specific problems in the production of white wines: the protein and tartaric stability. In fact, a very frequent cause of turbidity and formation of organic deposits in white wines is the occurrence of thermolabile and thermostable proteins colloidal suspensions which precipitate in time, especially in summertime and during the storage and transport. Normally, to mitigate this risk wine producers use organic and inorganic stabilizers and clarifiers. The best known treatment, recognized also by the International Organisation of Vine and Wine (OIV) foresees the use of bentonite with a montmorillonite content not lower than 80%. The present paper aims at evaluating the use of two high zeolite grade Italian volcanoclastites such as the Neapolitan Yellow Tuff (NYT) and the Yellow Facies of the Campanian Ignimbrite (YFCI), in the treatment of three peculiar white wines of the Campanian region (Southern Italy): Falanghina, Fiano di Avellino and Greco di Tufo. Granulates were produced starting from tuff blocks as provided by quarries. Some grain size fractions have been prepared to investigate the zeolite content (phillipsite + chabazite + analcime) by X-ray diffraction (XRD). A 2-5 mm grain size fraction was chosen for NYT and a 5-10 mm for YFCI. Three Campanian monocultivar white wines were used for the test: the Falanghina 2006 vintage, the Fiano di Avellino DOCG 2007 vintage, and the Greco di Tufo DOCG 2008 vintage. 48 samples with mixture of the zeolitized tuffs, 1 sample with mixture of a synthetic zeolite A and 1 sample with mixture of a commercial sodium activated bentonite were prepared. ICP-OES analysis for the determination of ECEC, Ion Chromatography (IC) analyses for the determination of some major cations and Turbidimetric tests for the definition of the protein stabilization process before and after treatments were also carried out. It was evidenced that high zeolitized tuff/wine ratios enable the protein stabilization whereas a significant decrease of potassium ion after the treatment with a zeolite-rich powder improves the tartaric stability, a serious problem in all the wine productions. The results of these tests refer to a laboratory scale research. A transfer of the experiment to a pilot plant scale is in progress
- …