A fabrication study of surface acoustic wave devices for magnetic field detection

Surface acoustic wave (SAW) sensors are versatile devices that can be configured to sense a variety of measurands such as temperature and pressure. The potential use of surface acoustic wave devices for magnetic field detection is explored in this study. Compared to current magnetic field sensors, a sensor based on a SAW delay-line could theoretically achieve a substantially higher sensitivity. In addition to this, such a device could potentially be interrogated wirelessly and act passively consuming no power, opening the doors for numerous application possibilities. A proposed basic design for a SAW magnetic wave sensor is presented along with a fabrication process to manufacture such a device. Using a common SAW delay-line as the basis of the design, material and component selection is justified. A lithium niobate piezoelectric substrate is used as the foundation of the device, with the interdigital transducers fabricated with aluminum. The stimulus-detecting component of the device is a magnetostrictive nickel thin film. A standard microelectronic fabrication process flow was designed and implemented in creating prototype devices using the materials and components described. The fabricated devices are described and issues arising from fabrications are also discussed

Blue shifting of the A exciton peak in folded monolayer 1H-MoS2

The large family of layered transition-metal dichalcogenides is widely believed to constitute a second family of two-dimensional (2D) semiconducting materials that can be used to create novel devices that complement those based on graphene. In many cases these materials have shown a transition from an indirect bandgap in the bulk to a direct bandgap in monolayer systems. In this work we experimentally show that folding a 1H molybdenum disulphide (MoS2) layer results in a turbostratic stack with enhanced photoluminescence quantum yield and a significant shift to the blue by 90 meV. This is in contrast to the expected 2H-MoS2 band structure characteristics, which include an indirect gap and quenched photoluminescence. We present a theoretical explanation to the origin of this behavior in terms of exciton screening.Comment: 16 pages, 8 figure

Growth-substrate induced performance degradation in chemically synthesized monolayer MoS2ﾠfield effect transistors

We report on the electronic transport properties of single-layer thick chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) field-effect transistors (FETs) on Si/SiO2 substrates. MoS2 has been extensively investigated for the past two years as a potential semiconductor analogue to graphene. To date, MoS2 samples prepared via mechanical exfoliation have demonstrated field-effect mobility values which are significantly higher than that of CVD-grown MoS2. In this study, we will show that the intrinsic electronic performance of CVD-grown MoS2 is equal or superior to that of exfoliated material and has been possibly masked by a combination of interfacial contamination on the growth substrate and residual tensile strain resulting from the high-temperature growth process. We are able to quantify this strain in the as-grown material using pre- and post-transfer metrology and microscopy of the same crystals. Moreover, temperature-dependent electrical measurements made on as-grown and transferred MoS2 devices following an identical fabrication process demonstrate the improvement in field-effect mobility

Thermal stability landscape for Klenow DNA polymerase as a function of pH and salt concentration

The thermal denaturation of Klenow DNA polymerase has been characterized over a wide variety of solution conditions to obtain a relative stability landscape for the protein. Measurements were conducted utilizing a miniaturized fluorescence assay that measures Tm based on the increase in the fluorescence of 1,8-anilinonaphthalene sulfonate (ANS) when the protein denatures. The melting temperature (Tm) for Klenow increases as the salt concentration is increased and as the pH is decreased. Klenow\u27s Tm spans a range of over 20 °C, from 40 to 62 °C, depending upon the solution conditions. The landscape reconciles and extends previously measured Tm values for Klenow. Salt effects on the stability of Klenow show strong cation dependence overlaid onto a more typical Hofmeister anion type dependence. Cationic stabilization of proteins has been far less frequently documented than anionic stabilization. The monovalent cations tested stabilize Klenow with the following hierarchy: NH4+ \u3e Na+ \u3e Li+ \u3e K+. Of the divalent cations tested: Mg+2 and Mn+2 significantly stabilize the protein, while Ni+2 dramatically destabilizes the protein. Stability measurements performed in combined Mg+2 plus Na+ salts suggest that the stabilizing effects of these monovalent and divalent cations are synergistic. The cationic stabilization of Klenow can be well explained by a model postulating dampening of repulsion within surface anionic patches on the protein. © 2006 Elsevier B.V. All rights reserved

Strong transient magnetic fields induced by THz-driven plasmons in graphene disks

Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carrier concentrations. Plasmon resonances provide new degrees of freedom that can be used to tune or enhance the light-induced magnetic field in engineered metamaterials. Here we employ graphene disks to demonstrate light-induced transient magnetic fields from a plasmonic circular current with extremely high efficiency. The effective magnetic field at the plasmon resonance frequency of the graphene disks (3.5 THz) is evidenced by a strong (~1{\deg}) ultrafast Faraday rotation (~ 20 ps). In accordance with reference measurements and simulations, we estimated the strength of the induced magnetic field to be on the order of 0.7 T under a moderate pump fluence of about 440 nJ cm-2

Electrical performance of monolayer MoS2 field-effect transistors prepared by chemical vapor deposition

Molybdenum disulfide (MoS2) field effect transistors (FET) were fabricated on atomically smooth large-area single layers grown by chemical vapor deposition. The layer qualities and physical properties were characterized using high-resolution Raman and photoluminescence spectroscopy, scanning electron microscopy, and atomic force microscopy. Electronic performance of the FET devices was measured using field effect mobility measurements as a function of temperature. The back-gated devices had mobilities of 6.0 cm2/V s at 300K without a high-j dielectric overcoat and increased to 16.1 cm2/V s with a high-j dielectric overcoat. In addition the devices show on/off ratios ranging from 105 to 109

Plasma Desmosine and Abdominal Aortic Aneurysm Disease

Background It is recognized that factors beyond aortic size are important in predicting outcome in abdominal aortic aneurysm (AAA) disease. AAA is characterized by the breakdown of elastin within the aortic tunica media, leading to aortic dilatation and rupture. The aim of this study was to investigate the association of plasma desmosine (pDES), an elastin-specific degradation product, with disease severity and clinical outcome in patients with AAA. Methods and Results We measured pDES and serum biomarker concentrations in 507 patients with AAAs (94% men; mean age, 72.4±6.1 years; mean AAA diameter, 48±8 mm) and 162 control subjects (100% men; mean age, 71.5±4.4 years) from 2 observational cohort studies. In the longitudinal cohort study (n=239), we explored the incremental prognostic value of pDES on AAA events. pDES was higher in patients with AAA compared with control subjects (mean±SD: 0.46±0.22 versus 0.33±0.16 ng/mL; P<0.001) and had the strongest correlation with AAA diameter (r=0.39; P<0.0001) of any serum biomarker. After adjustment for baseline AAA diameter, pDES was associated with an AAA event (hazard ratio, 2.03 per SD increase [95% CI, 1.02-4.02]; P=0.044). In addition to AAA diameter, pDES provided incremental improvement in risk stratification (continuous net reclassification improvement, 34.4% [95% CI, -10.8% to 57.5%; P=0.09]; integrated discrimination improvement, 0.04 [95% CI, 0.00-0.15; P=0.050]). Conclusions pDES concentrations predict disease severity and clinical outcomes in patients with AAA. Clinical Trial Registration http://www.isrctn.com. Unique identifier: ISRCTN76413758

Exaggerated elastin turnover in young individuals with Marfan Syndrome – new insights from the AIMS trial

Background and aims: The fragmentation and loss of elastic fibre in the tunica media of the aorta is a pathological hallmark of Marfan syndrome (MFS) but the dynamics of elastin degradation and its relationship to aortic size and physiological growth remain poorly understood.Methods: In this post-hoc analysis of the AIMS randomised-controlled trial, the association of plasma desmosine (pDES) - a specific biomarker of mature elastin degradation - with age and aortic size was analysed in 113 patients with MFS and compared to 109 healthy controls.Results: There was a strong association between age and pDES in both groups, with higher pDES levels in the lower age groups compared to adults. During childhood, pDES increased and peaked during early adolescence, and thereafter decreased to lower adult levels. This trend was exaggerated in young individuals with MFS but in those above 25 years of age, pDES levels were comparable to controls despite the presence of aortic root dilation. In MFS children, increased aortic diameter relative to controls was seen at an early age and although the increase in diameter was less after adolescence, aortic root size continued to increase steadily with age. In MFS participants there was an indication of a positive association between baseline pDES levels and aortic root dilatation during up to 5 years of follow up.Conclusion: This study has shown that developmental age has a significant effect on levels of elastin turnover as measured by pDES in MFS individuals as well as healthy controls. This effect is exaggerated in those with MFS with increased levels seen during the period of physiologic development which plateaus towards adulthood. This suggests an early onset of pathophysiology that may present an important opportunity for disease modifying intervention

Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study.

BACKGROUND: Previous studies regarding modular head-neck taper corrosion were largely based on cobalt chrome (CoCr) alloy femoral heads. Less is known about head-neck taper corrosion with ceramic femoral heads. QUESTIONS/PURPOSES: We asked (1) whether ceramic heads resulted in less taper corrosion than CoCr heads; (2) what device and patient factors influence taper fretting corrosion; and (3) whether the mechanism of taper fretting corrosion in ceramic heads differs from that in CoCr heads. METHODS: One hundred femoral head-stem pairs were analyzed for evidence of fretting and corrosion using a visual scoring technique based on the severity and extent of fretting and corrosion damage observed at the taper. A matched cohort design was used in which 50 ceramic head-stem pairs were matched with 50 CoCr head-stem pairs based on implantation time, lateral offset, stem design, and flexural rigidity. RESULTS: Fretting and corrosion scores were lower for the stems in the ceramic head cohort (p=0.03). Stem alloy (p=0.004) and lower stem flexural rigidity (Spearman\u27s rho=-0.32, p=0.02) predicted stem fretting and corrosion damage in the ceramic head cohort but not in the metal head cohort. The mechanism of mechanically assisted crevice corrosion was similar in both cohorts although in the case of ceramic femoral heads, only one of the two surfaces (the male metal taper) engaged in the oxide abrasion and repassivation process. CONCLUSIONS: The results suggest that by using a ceramic femoral head, CoCr fretting and corrosion from the modular head-neck taper may be mitigated but not eliminated. CLINICAL RELEVANCE: The findings of this study support further study of the role of ceramic heads in potentially reducing femoral taper corrosion