Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications

Preparation and characterization of TiAlSiN/TiAlSiON/SiO2 solar selective absorber is reported in this contribution. All layers were deposited in a continuous mode using a industrial equipment, the nitride and oxynitride were prepared by reactive magnetron sputtering and the SiO2 layer by Plasma Enhanced Chemical Vapour Deposition. The optical constants of individual layers were calculated by modelling of spectral transmittance and reflectance of the individual layers. The three layer stack absorber was then designed using those optical properties. The thickness of the individual layers was optimized until a solar absorptance of 96% was obtained resulting in a total thickness of about 200 nm, deposited in copper and extruded aluminium absorbers. An emissivity of 5 % for an absorber temperature of 100 ºC was obtained by analyzing the measuring data from a FTIR spectrometer with integrating sphere. After test duration of 600 h, the samples subjected to a thermal annealing at 278 ºC in air showed a performance criterion (PC) below 4% for, while the samples in the humidity tests showed a PC below 2 %.Savo Sola

Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications

Characterization of a TiAlN/TiAlON/SiO2 tandem absorber is reported in this contribution. The first two layers were deposited by magnetron sputtering and the third layer was prepared by plasma enhanced chemical vapour deposition (PECVD). The optimization was performed by determining the optical constants of individual layers by first measuring spectral transmittance and reflectance of the individual layers. Subsequently the measuring spectra were fitted using the SCOUT software and dielectric function of each layer was determined. The three layer stack absorber on copper was then designed using those optical properties. The thickness of the individual layers was optimized until a solar absorptance of 95.5% was obtained resulting in a total thickness of about 215 nm (65 nm/51 nm/100 nm for the individual layers, respectively). A thermal emittance of 5% for an absorber temperature of 100 °C was obtained by analyzing the measuring data from a FTIR spectrometer with integrating sphere. During continuous thermal annealing at 278 °C for 600 h the absorptance decreased by 0.4%Savo Sola

Mechanical properties and microstructure of additively manufactured stainless steel with laser welded joints

Powder bed fusion (PBF) is a commonly employed metal additive manufacturing (AM) process in which components are built, layer-by-layer, using metallic powder. The component size is limited by the internal build volume of the employed PBF AM equipment; the fabrication of components larger than this volume therefore requires mechanical joining methods, such as laser welding. There are, however, very limited test data on the mechanical performance of PBF metal with laser welded joints. In this study, the mechanical properties of PBF built 316L stainless steel parts, joined together using laser welding to form larger components, have been investigated; the microstructure of the components has also been examined. 33 PBF 316L stainless steel tensile coupons, with central laser welds, welded using a range of welding parameters, and with coupon half parts built in two different orientations, were tested. The porosity, microhardness and microstructure of the welded coupons, along with the widths of the weld and heat-affected zone (HAZ), were characterised. The PBF base metal exhibited a typical cellular microstructure, while the weld consisted of equiaxed, columnar and cellular dendrite microstructures. Narrow weld regions and HAZs were observed. The PBF base metal was found to have higher proof and ultimate strengths, but a similar fracture strain and a lower Young’s modulus, compared with conventionally manufactured 316L stainless steel. The strengths were dependent on the build direction – the vertically built specimens showed lower proof strengths than the horizontal specimens. The laser welds generally exhibited lower microhardness, proof strengths and fracture strains than the PBF base metal which correlated with the observed structure. This work has demonstrated that PBF built parts can be joined by laser welding to form larger components and provided insight into the resulting strength and ductility

Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON layers

Solar selective coatings based on double Al2O3:W cermet layers and AlSiN/AlSiON bilayer structures were prepared by magnetron sputtering. Both were deposited on stainless steel substrates using a metallic tungsten (W) layer as back reflector. The coating stacks were completed by an antireflection (AR) layer composed of Al2O3, SiO2, or AlSiOx. Spectrophotometer measurements, X-Ray diffraction, Scanning electron microscopy, Energy Dispersive X-Ray Spectroscopy and Rutherford Backscattering Spectrometry were used to characterize the optical properties, crystalline structure, morphology and composition of these coatings. The spectral optical constants of the single layers were calculated from the reflectance and transmittance measurements and used to design the optical stack. The coatings exhibit a solar absorptance of 93%-95% and an emissivity of 7%-10% (at 400 ºC). The coatings also exhibit excellent thermal stability, with small changes in the optical properties of the coating during heat-treatments at 400 ºC in air for 2500 h and at 580 ºC in vacuum for 850 h. The coating based on the AlSiN/AlSiON bilayer structure was obtained with an Al:Si ratio of 2.5:1. These coatings revealed similar performance as the one obtained with coatings based on Al2O3:W cermet layers.The authors acknowledge the funding from the Finnish Funding Agency for Technology and Innovation, Tekes, and from FEDER funds through the “Programa Operacional Factores de Competitividade – COMPETE” and from national funds by FCT- “Fundação para a Ciência e a Tecnologia”, under project no. PEst-C/FIS/UI0607/2011.info:eu-repo/semantics/publishedVersio

A design of selective solar absorber for high temperature applications

This study presents a design of multilayer solar selective absorber for high temperature applications. The optical stack of this absorber is composed of four layers deposited by magnetron sputtering on stainless steel substrates. The first is a back-reflector tungsten layer, which is followed by two absorption layers based on CrAlSiNx/ CrAlSiOyNx structure for phase interference. The final layer is an antireflection layer of SiAlOx. The design was theoretically modelled with SCOUT software using transmittance and reflectance curves of individual thin layers, which were deposited on glass substrates. The final design shows simultaneously high solar absorbance = 95.2 % and low emissivity ε= 9.8% (at 400 ºC) together with high thermal stability at 400 ºC, in air, and 600 ºC in vacuum for 650 h.The authors acknowledge the support of FCT in the framework of the Strategic Funding UID/FIS/04650/2013 and the financial support of FCT, POCI and PORL operational programs through the project POCI-01-0145- FEDER-016907 (PTDC/CTM-ENE/2882/2014), co-financed by European community fund FEDER.info:eu-repo/semantics/publishedVersio

Natural coagulates for wastewater treatment; a review for application and mechanism

The increase of water demand and wastewater generation is among the global concerns in the world. The less effective management of water sources leads to serious consequences, the direct disposal of untreated wastewater is associated with the environmental pollution, elimination of aquatic life and the spread of deadly epidemics. The flocculation process is one of the most important stages in water and wastewater treatment plants, wherein this phase the plankton, colloidal particles, and pollutants are precipitated and removed. Two major types of coagulants are used in the flocculation process included the chemical and natural coagulants. Many studies have been performed to optimize the flocculation process while most of these studies have confirmed the hazardous effects of chemical coagulants utilization on the ecosystem. This chapter reviews a summary of the coagulation/flocculation processes using natural coagulants as well as reviews one of the most effective natural methods of water and wastewater treatment

Brain TSPO-PET predicts later disease progression independent of relapses in multiple sclerosis

Overactivation of microglia is associated with most neurodegenerative diseases. In this study we examined whether PET-measurable innate immune cell activation predicts multiple sclerosis disease progression. Activation of microglia/macrophages was measured using the 18-kDa translocator protein (TSPO)-binding radioligand 11C-PK11195 and PET imaging in 69 patients with multiple sclerosis and 18 age- and sex-matched healthy controls. Radioligand binding was evaluated as the distribution volume ratio from dynamic PET images. Conventional MRI and disability measurements using the Expanded Disability Status Scale were performed for patients at baseline and 4.1 ± 1.9 (mean ± standard deviation) years later. Fifty-one (74%) of the patients were free of relapses during the follow-up period. Patients had increased activation of innate immune cells in the normal-appearing white matter and in the thalamus compared to the healthy control group (P = 0.033 and P = 0.003, respectively, Wilcoxon). Forward-type stepwise logistic regression was used to assess the best variables predicting disease progression. Baseline innate immune cell activation in the normal-appearing white matter was a significant predictor of later progression when the entire multiple sclerosis cohort was assessed [odds ratio (OR) = 4.26; P = 0.048]. In the patient subgroup free of relapses there was an association between macrophage/microglia activation in the perilesional normal-appearing white matter and disease progression (OR = 4.57; P = 0.013). None of the conventional MRI parameters measured at baseline associated with later progression. Our results strongly suggest that innate immune cell activation contributes to the diffuse neural damage leading to multiple sclerosis disease progression independent of relapses

Vertical profiles of sub-3nm particles over the boreal forest

This work presents airborne observations of sub-3 nm particles in the lower troposphere and investigates new particle formation (NPF) within an evolving boundary layer (BL). We studied particle concentrations together with supporting gas and meteorological data inside the planetary BL over a boreal forest site in Hyytiala, southern Finland. The analysed data were collected during three flight measurement campaigns: May-June 2015, August 2015 and April-May 2017, including 27 morning and 26 afternoon vertical profiles. As a platform for the instrumentation, we used a Cessna 172 aircraft. The analysed flight data were collected horizontally within a 30 km distance from SMEAR II in Hyytiala and vertically from 100 m above ground level up to 2700 m. The number concentration of 1.5-3 nm particles was observed to be, on average, the highest near the forest canopy top and to decrease with increasing altitude during the mornings of NPF event days. This indicates that the precursor vapours emitted by the forest play a key role in NPF in Hyytiala. During daytime, newly formed particles were observed to grow in size and the particle population became more homogenous within the well-mixed BL in the afternoon. During undefined days with respect to NPF, we also detected an increase in concentration of 1.5-3 nm particles in the morning but not their growth in size, which indicates an interrupted NPF process during these undefined days. Vertical mixing was typically stronger during the NPF event days than during the undefined or non-event days. The results shed light on the connection between boundary layer dynamics and NPF.Peer reviewe

Natalizumab treatment reduces microglial activation in the white matter of the MS brain

ObjectiveTo evaluate whether natalizumab treatment reduces microglial activation in MS.MethodsWe measured microglial activation using the 18-kDa translocator protein (TSPO)-binding radioligand [C-11] PK11195 and PET imaging in 10 patients with MS before and after 1 year treatment with natalizumab. Microglial activation was evaluated as the distribution volume ratio (DVR) of the specifically bound radioligand in brain white and gray matter regions of interest. MRI and disability measurements were performed for comparison. Evaluation was performed identically with 11 age-and sex-matched patients with MS who had no MS therapy.ResultsNatalizumab treatment reduced microglial activation in the normal-appearing white matter (NAWM; baseline DVR vs DVR after 1 year of treatment 1.25 vs 1.22, p = 0.014, Wilcoxon) and at the rim of chronic lesions (baseline DVR vs DVR after 1 year of treatment 1.24 vs 1.18, p = 0.014). In patients with MS with no treatment, there was an increase in microglial activation at the rim of chronic lesions (1.23 vs 1.27, p = 0.045). No alteration was observed in microglial activation in gray matter areas. In the untreated patient group, higher microglial activation at baseline was associated with more rapid disability progression during an average of 4 years of follow-up.ConclusionsTSPO-PET imaging can be used as a tool to assess longitudinal changes in microglial activation in the NAWM and in the perilesional areas in the MS brain in vivo. Natalizumab treatment reduces the diffuse compartmentalized CNS inflammation related to brain resident innate immune cells