Poly(amido amine)s as Gene Delivery Vectors: Effects of Quaternary Nicotinamide Moieties in the Side Chains

To evaluate the effect of quaternary nicotinamide pendant groups on gene delivery properties, a series of poly(amido amine) (co)polymers were synthesized by Michael addition polymerization of N, N-cystaminebisacrylamide with variable ratios of 1-(4-aminobutyl)-3-carbamoylpyridinium (Nic-BuNH2), and tert-butyl-4-aminobutyl carbamate (BocNH-BuNH2), yielding poly(amido amine)s (NicX-NHBoc) with X=0, 10, 30, and 50 % of quaternary nicotinamide groups in the polymer side chains. Deprotection of the pendant Boc-NH groups afforded an analogous series of polymers (NicX-NH2) with higher charge density (due to the presence of protonated primary amino groups in the side chains) and subsequent acetylation yielded a series of polymers (NicX-NHAc) of lower hydrophobicity than the Boc-protected polymers. The polymers with the Boc-protected or the acetylated amino groups showed high buffer capacity in the range pH 5.1-7.4, which is a property that can contribute to endosomal escape of polyplexes. The presence of quaternary nicotinamide groups has distinct beneficial effects on the gene vector properties of these polymers. The polymers containing 30 % of quaternary nicotinamide groups in their side chains condense DNA into small, nanosized particles (200 nm) with positive surface charge (+15 mV). Fluorescence experiments using ethidium bromide as a competitor showed that the quaternary nicotinamide groups intercalate with DNA, contributing to a more intimate polymer-DNA binding and shielding. Polyplexes of nicotinamide-functionalized poly(amido amine)s NicX-NHBoc and NicX-NHAc, formed at 12/1 polymerDNA mass ratio, efficiently transfect COS-7 cells with efficacies up to four times higher than that of PEI (Exgen 500), and with essentially absence of cytotoxicity. NicX-NH2 polymers, possessing protonated primary amino groups in their side chains, have a higher cytotoxicity profile under these conditions, but at lower 3/1 polymer-DNA mass ratio also these polymers are capable of efficient transfection, while retaining full cell viability

Poly-l/dl-lactic acid films functionalized with collagen IV as carrier substrata for corneal epithelial stem cells

Limbal epithelial stem cells (LESCs) are responsible for the renewal of corneal epithelium. Cultivated limbal epithelial transplantation is the current treatment of choice for restoring the loss or dysfunction of LESCs. To perform this procedure, a substratum is necessary for in vitro culturing of limbal epithelial cells and their subsequent transplantation onto the ocular surface. In this work, we evaluated poly-L/DL-lactic acid 70:30 (PLA) films functionalized with type IV collagen (col IV) as potential in vitro carrier substrata for LESCs. We first demonstrated that PLA-col IV films were biocompatible and suitable for the proliferation of human corneal epithelial cells. Subsequently, limbal epithelial cell suspensions, isolated from human limbal rings, were cultivated using culture medium that did not contain animal components. The cells adhered significantly faster to PLA-col IV films than to tissue culture plastic (TCP). The mRNA expression levels for the LESC specific markers, K15, P63α and ABCG2 were similar or greater (significantly in the case of K15) in limbal epithelial cells cultured on PLA-col IV films than limbal epithelial cells cultured on TCP. The percentage of cells expressing the corneal (K3, K12) and the LESC (P63α, ABCG2) specific markers was similar for both substrata. These results suggest that the PLA-col IV films promoted LESC attachment and helped to maintain their undifferentiated stem cell phenotype. Consequently, these substrata offer an alternative for the transplantation of limbal cells onto the ocular surface.This work was supported by the Carlos III National Institute of Health, Spain (CIBER-BBN and Spanish Network on Cell Therapy, (TerCel RD12/0019/0036), MINECO/FEDER, EU), and the Castilla y León Regional Government, Spain (Regional Center for Regenerative Medicine and Cell Therapy, SAN673/VA/28/08 and SAN126/VA11/09)

Development of tailored and self-mineralizing citric acid-crosslinked hydrogels for in situ bone regeneration

Producción CientíficaBone tissue engineering demands alternatives overcoming the limitations of traditional approaches in the context of a constantly aging global population. In the present study, elastin-like recombinamers hydrogels were produced by means of carbodiimide-catalyzed crosslinking with citric acid, a molecule suggested to be essential for bone nanostructure. By systematically studying the effect of the relative abundance of reactive species on gelation and hydrogel properties such as functional groups content, degradation and structure, we were able to understand and to control the crosslinking reaction to achieve hydrogels mimicking the fibrillary nature of the extracellular matrix. By studying the effect of polymer concentration on scaffold mechanical properties, we were able to produce hydrogels with a stiffness value of 36.13 ± 10.72 kPa, previously suggested to be osteoinductive. Microstructured and mechanically-tailored hydrogels supported the growth of human mesenchymal stem cells and led to higher osteopontin expression in comparison to their non-tailored counterparts. Additionally, tailored hydrogels were able to rapidly self-mineralize in biomimetic conditions, evidencing that citric acid was successfully used both as a crosslinker and a bioactive molecule providing polymers with calcium phosphate nucleation capacity.Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA244U13

Optimization of guanosine-based hydrogels with boric acid derivatives for enhanced long-term stability and cell survival

Tissue defects can lead to serious health problems and often require grafts or transplants to repair damaged soft tissues. However, these procedures can be complex and may not always be feasible due to a lack of available tissue. Hydrogels have shown potential as a replacement for tissue grafts due to their ability to support cell survival and encapsulate biomolecules such as growth factors. In particular, guanosine-based hydrogels have been explored as a potential solution, but they often exhibit limited stability which hampers their use in the biofabrication of complex grafts. To address this issue, we explored the use of borate ester chemistry and more complex boric acid derivatives to improve the stability and properties of guanosine-based hydrogels. We hypothesized that the aromatic rings in these derivatives would enhance the stability and printability of the hydrogels through added π-π stack interactions. After optimization, 13 compositions containing either 2-naphthylboronic acid or boric acid were selected. Morphology studies shows a well-defined nanofibrilar structure with good printable properties (thixotropic behaviour, print fidelity and printability). Moreover, the pH of all tested hydrogels was within the range suitable for cell viability (7.4–8.3). Nevertheless, only the boric acid-based formulations were stable for at least 7 days. Thus, our results clearly demonstrated that the presence of additional aromatic rings did actually impair the hydrogel properties. We speculate that this is due to steric hindrance caused by adjacent groups, which disrupt the correct orientation of the aromatic groups required for effective π-π stack interactions of the guanosine building block. Despite this drawback, the developed guanosine-boric acid hydrogel exhibited good thixotropic properties and was able to support cell survival, proliferation, and migration. For instance, SaOS-2 cells planted on these printed structures readily migrated into the hydrogel and showed nearly 100% cell viability after 7 days. In conclusion, our findings highlight the potential of guanosine-boric acid hydrogels as tissue engineering scaffolds that can be readily enhanced with living cells and bioactive molecules. Thus, our work represents a significant advancement towards the development of functionalized guanosine-based hydrogels

Amplification of Chirality in Hydrogen-Bonded Tetrarosette Helices

The amplification of chirality in hydrogen-bonded tetrarosette assemblies under thermodynamic equilibrium is described. The extent of the chiral amplification obtained by means of sergeants-and-soldiers experiments depends only on the structure of the assembly and it is independent of the methodology used for the formation of the tetrarosette assemblies. The difference in free energy (Δ\ud GoM/P) between the M- and P-diastereomeric helices is up to 40 times higher than for double rosette assemblies

Suprmolecular chirality of self-assembled systems in solution

Self-assembly plays an important role in the formation of many (chiral) biological structures, such as DNA, α-helices or ß-sheets of proteins. This process, which is the main tool of Supramolecular Chemistry (i.e. the chemistry of the molecular assemblies and of the intermolecular bonds), starts to play a significant role in nanotechnology for the construction of functional synthetic structures of nanometer size. The control of chirality in synthetic self-assembled systems is very important for applications of these systems e.g. in molecular recognition or mimicking of the catalytic activity of enzymes. This tutorial review deals with the most representative contributions in the field of supramolecular chirality. Specifically, the discussion centers on several examples that represent the control over chirality for self-assembled systems in solution

Selective intercalation of six ligand molecules in a self-assembled triple helix

The addition of a ligand molecule to an artificial self-assembled triple helix leads to the selective intercalation of two hydrogen-bonded trimers in specific binding pockets. Furthermore, the triple helix suffers large conformational rearrangements in order to accommodate the ligand molecules in a highly organized manner

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers.

Bioprinting allows the fabrication of living constructs with custom-made architectures by spatially controlled deposition of multiple bioinks. This is important for the generation of tissue, such as osteochondral tissue, which displays a zonal composition in the cartilage domain supported by the underlying subchondral bone. Challenges in fabricating functional grafts of clinically relevant size include the incorporation of cues to guide specific cell differentiation and the generation of sufficient cells, which is hard to obtain with conventional cell culture techniques. A novel strategy to address these demands is to combine bioprinting with microcarrier technology. This technology allows for the extensive expansion of cells, while they form multi-cellular aggregates, and their phenotype can be controlled. In this work, living constructs were fabricated via bioprinting of cell-laden microcarriers. Mesenchymal stromal cell (MSC)-laden polylactic acid microcarriers, obtained via static culture or spinner flask expansion, were encapsulated in gelatin methacrylamide-gellan gum bioinks, and the printability of the composite material was studied. This bioprinting approach allowed for the fabrication of constructs with high cell concentration and viability. Microcarrier encapsulation improved the compressive modulus of the hydrogel constructs, facilitated cell adhesion, and supported osteogenic differentiation and bone matrix deposition by MSCs. Bilayered osteochondral models were fabricated using microcarrier-laden bioink for the bone compartment. These findings underscore the potential of this new microcarrier-based biofabrication approach for bone and osteochondral constructs

Polylactic acid organogel as versatile scaffolding technique

Tissue engineering requires scaffolding techniques based on non-toxic processes that permits the fabrication of constructs with tailored properties. Here, a two-step methodology based on the gelation and precipitation of the poly(lactic) acid/ethyl lactate organogel system is presented. With this technique nanofibrous matrices that resemble natural extracellular matrix can be easily obtained, while allowing control over the mechanical properties of the device. Gelation temperature and the dynamics of the gelation of the organogel system are characterized, and the final mechanical and viscoelastic properties, as well as porosity, as function of the initial polymer concentration are described. We show that gelation temperature of the system is concentration independent and below 44.5 °C, which permits gelation at room temperature. Furthermore, mechanical properties are found in the range of the soft organic tissues, and the obtained micro-network architecture gives place to a flexible structure. Such structure presents tuneable elastic modulus and viscoelastic properties as function of nanofibers density. Moreover, centimetre-long tubular scaffolds with the diameter of medium-caliber blood vessels were produced. The fibrous nano-architecture mimics the native extracellular matrix fibres diameter and morphology was proven to be suitable to support endothelialization of the lumen of the tube. Thus, this strategy, based on biocompatible green compound might be promising for the fabrication of large 3D scaffolds for tissue engineering applications