Electrochemical impedance spectroscopy of dodecylsulphate doped polypyrrole films in the dark and under illumination

The morphology, thickness, oxidation and illumination effects in dodecylsulphate doped polypyrrole films can be qualitatively observed by EIS and consist in variations of interfacial and bulk resistances and capacitances of a proposed equivalent circuit. The circuit well with the measured spectra of films obtained with 190 mC cm-2 of synthesis charge density. For thinner films the calculated values observed by electrochemical impedance spectroscopy (EIS) deviate probably due to the absence of diffusion effects. The oxidation of the films diminishes the total impedance over the entire frequency range. The morphology effects are also observed in the entire spectra. The illumination effects are reversible and are observed as expected only in the reduced form of the polymer. The illumination reduces the internal resistance and the space-charge capacitance and increases the charge transfer resistance and the double layer capacitance.Efeitos de morfologia, espessura, oxidação e iluminação dos filmes de polipirrol dopados com dodecilsulfato podem ser observados qualitativamente por EIS e consistem de variações de valores de resistências e capacitâncias de um circuito equivalente proposto, presentes nas interfaces e no interior do material. O circuito se ajusta bem para filmes sintetizados com densidade de carga de 190 mC cm-2. Para filmes mais finos os valores calculados por espectroscopia de impedância eletroquímica (EIS) apresentam desvios provavelmente pela ausência de efeitos difusivos. A oxidação dos filmes causa uma diminuição geral da impedância em toda a faixa de freqüências medidas. Os efeitos de morfologia também são observados em todas as freqüências. Os efeitos de iluminação são reversíveis e aparecem, como esperado, apenas quando o polímero está na forma reduzida. A iluminação diminui a resistência interna e a capacitância de carga espacial e aumenta a resistência de transferência de carga e a capacitância de dupla camada.5058Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Etude et modelisation du comportement redox de la polyaniline et de polyanilines substituees par voltamperometrie, impedancemetrie et effet mirage

SIGLEAvailable from INIST (FR), Document Supply Service, under shelf-number : T 78368 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Desenvolvimento e aplicação de células eletroquímicas em camada delgada

Theoretical and practical aspects concerning construction and use of a thin layer electrochemical cell are presented. Construction was realized by a simple technic and geometry was optimized in order to minimize the problems of electrical resistance. A well known redox system was studied ((Fe(III)(CN)6(3-)/Fe(II)(CN) 6(4-)) using two experimental methods, cyclic voltammetry and pulse chronopotentiometry. A numerical integration based-program was developed to calculate the voltammetric current in case of nernstian and non-nernstian behaviours and a diffusional model was used to treat the chronopotentiometric data. Thermodynamic (potential, concentration) and kinetic parameters (diffusion coefficient) were successfully determined for the redox system studied in this work

Electrical degradation of porous and dense LSM/YSZ interface

International audienceElectrochemical cells formed by the interface between dense and porous lanthanum strontium manganate (LSM) and yttria stabilized zirconia (YSZ) were submitted to annealing temperatures varying from 1373 K to 1673 K for 200 h and studied by Impedance Spectroscopy (IS) in order to investigate how the high annealing temperature can modify the contact between LSM/YSZ and to which extension these changes influence the electrical behavior of dense and porous LSM electrodes before and after the formation of insulating phases. Up to 1473 K the annealing process did not lead to substantial electrical behavior modifications at the LSM/YSZ interfaces for both porous and dense electrodes. IS measurements show two capacitive semicircles, the best fitting of impedance data brings to an equivalent circuit constituted by a serial combination of the electrolyte resistance and two parallel combinations of a resistance and a constant phase element, CPE. The higher frequency semicircles, HF, were attributed to the diffusion of oxide ions from the interface LSM/YSZ to the oxide ion vacancies located at the electrolyte surface. The semicircle at lower frequency, LF, will be ascribed to the oxygen species adsorption and diffusion in the LSM. At 1473 K the only changes recorded are related with the sinterization process of the porous electrodes. Over of 1473 K, the resistance contributions increased largely, especially for porous electrodes, and one additional semicircle was observed. This semicircle was associated to the oxygen diffusion process at the new insulating phases formed from YSZ and LSM solid state reactions. Porous and dense electrodes exhibited different rates for the degradation process. The porous electrode degraded faster than the dense one, probably because of the morphological effects as grain growth and their coalescence during annealing at higher temperatures

Electrochemical impedance spectroscopy of dodecylsulphate doped polypyrrole films in the dark and under illumination

The morphology, thickness, oxidation and illumination effects in dodecylsulphate doped polypyrrole films can be qualitatively observed by EIS and consist in variations of interfacial and bulk resistances and capacitances of a proposed equivalent circuit. The circuit well with the measured spectra of films obtained with 190 mC cm-2 of synthesis charge density. For thinner films the calculated values observed by electrochemical impedance spectroscopy (EIS) deviate probably due to the absence of diffusion effects. The oxidation of the films diminishes the total impedance over the entire frequency range. The morphology effects are also observed in the entire spectra. The illumination effects are reversible and are observed as expected only in the reduced form of the polymer. The illumination reduces the internal resistance and the space-charge capacitance and increases the charge transfer resistance and the double layer capacitance

Electrical study of cathodic activation and relaxation of La_0,80Sr_0,20MnO₃

International audienceThe effect of cathodic activation of sprayed La0.8Sr0.2MnO3 (LSM) films has been studied by electrochemical spectroscopy impedance (EIS). LSM powder was prepared by a citrate route and X-ray diffraction analyses show a complete LSM crystallization without La2O3 or La(OH)3 as side products. Porosity and grain size estimated from scanning electronic microscopy gave values of 33% and 100 nm, respectively. EIS measurement was performed on a Pt/yttria-stabilized zirconia/LSM cell before and after a cathodic current load (300 mA/cm2) on LSM electrode. The relaxation process, which is time-dependent, has been investigated. A drastic decrease of the electrode resistance was noticed just after applying the cathodic current, but after 9 h at optimized valence configuration in air at 850 °C, the recorded polarization resistance gradually enhanced until it almost reached the initial value. The resulting diagrams have been fitted using a Gerischer associated with a resistor and constant phase elements. This simple method has permitted us to observe that only the electrode interfaces are modified by a cathodic activation and the microstructure remains nearly constant

Electrochemical impedance spectroscopy of dodecylsulphate doped polypyrrole films in the dark and under illumination

The morphology, thickness, oxidation and illumination effects in dodecylsulphate doped polypyrrole films can be qualitatively observed by EIS and consist in variations of interfacial and bulk resistances and capacitances of a proposed equivalent circuit. The circuit well with the measured spectra of films obtained with 190 mC cm-2 of synthesis charge density. For thinner films the calculated values observed by electrochemical impedance spectroscopy (EIS) deviate probably due to the absence of diffusion effects. The oxidation of the films diminishes the total impedance over the entire frequency range. The morphology effects are also observed in the entire spectra. The illumination effects are reversible and are observed as expected only in the reduced form of the polymer. The illumination reduces the internal resistance and the space-charge capacitance and increases the charge transfer resistance and the double layer capacitance