1,276 research outputs found
Linear stability analysis of an insoluble surfactant monolayer spreading on a thin liquid film
Recent experiments by several groups have uncovered a novel fingering instability in the spreading of surface active material on a thin liquid film. The mechanism responsible for this instability is yet to be determined. In an effort to understand this phenomenon and isolate a possible mechanism, we have investigated the linear stability of a coupled set of equations describing the Marangoni spreading of a surfactant monolayer on a thin liquid support. The unperturbed flows, which exhibit simple linear behavior in the film thickness and surfactant concentration, are self-similar solutions of the first kind for spreading in a rectilinear geometry. The solution of the disturbance equations determines that the rectilinear base flows are linearly stable. An energy analysis reveals why these base flows can successfully heal perturbations of all wavenumbers. The details of this analysis suggest, however, a mechanism by which the spreading can be destabilized. We propose how the inclusion of additional forces acting on the surfactant coated spreading film might give rise to regions of adverse mobility gradients known to produce fingering instabilities in other fluid flows
Growth of non-modal transient structures during the spreading of surfactant coated films
The spreading of surfactant coated thin liquid films is often accompanied by an instability producing significant film corrugation, fingering and branching. Marangoni stresses, responsible for the rapid and spontaneous spreading, are suspected as the main cause of unstable flow. Traditional eigenvalue analysis of a self-similar solution describing Marangoni driven spreading has predicted only stable modes. We present results of a transient growth study which reveals enormous amplification of initially infinitesimal disturbances in the film thickness. This analysis provides, for the first time, evidence of an instability resembling experimental patterns
Spreading of a surfactant monolayer on a thin liquid film: Onset and evolution of digitated structures
We describe the response of an insoluble surfactant monolayer spreading on the surface of a thin liquid film to small disturbances in the film thickness and surfactant concentration. The surface shear stress, which derives from variations in surfactant concentration at the air–liquid interface, rapidly drives liquid and surfactant from the source toward the distal region of higher surface tension. A previous linear stability analysis of a quasi-steady state solution describing the spreading of a finite strip of surfactant on a thin Newtonian film has predicted only stable modes. [Dynamics in Small Confining Systems III, Materials Research Society Symposium Proceedings, edited by J. M. Drake, J. Klafter, and E. R. Kopelman (Materials Research Society, Boston, 1996), Vol. 464, p. 237; Phys. Fluids A 9, 3645 (1997); O. K. Matar Ph.D. thesis, Princeton University, Princeton, NJ, 1998]. A perturbation analysis of the transient behavior, however, has revealed the possibility of significant amplification of disturbances in the film thickness within an order one shear time after the onset of flow [Phys. Fluids A 10, 1234 (1998); "Transient response of a surfactant monolayer spreading on a thin liquid film: Mechanism for amplification of disturbances," submitted to Phys. Fluids]. In this paper we describe the linearized transient behavior and interpret which physical parameters most strongly affect the disturbance amplification ratio. We show how the disturbances localize behind the moving front and how the inclusion of van der Waals forces further enhances their growth and lifetime. We also present numerical solutions to the fully nonlinear 2D governing equations. As time evolves, the nonlinear system sustains disturbances of longer and longer wavelength, consistent with the quasi-steady state and transient linearized descriptions. In addition, for the parameter set investigated, disturbances consisting of several harmonics of a fundamental wavenumber do not couple significantly. The system eventually singles out the smallest wavenumber disturbance in the chosen set. The summary of results to date seems to suggest that the fingering process may be a transient response which nonetheless has a dramatic influence on the spreading process since the digitated structures redirect the flux of liquid and surfactant to produce nonuniform surface coverage
The development of transient fingering patterns during the spreading of surfactant coated films
The spontaneous spreading of an insoluble surfactant monolayer on a thin liquid film produces a complex waveform whose time variant shape is strongly influenced by the surface shear stress. This Marangoni stress produces a shocklike front at the leading edge of the spreading monolayer and significant film thinning near the source. For sufficiently thin films or large initial shear stress, digitated structures appear in the wake of the advancing monolayer. These structures funnel the oncoming flow into small arteries that continuously tip-split to produce spectacular dendritic shapes. A previous quasisteady modal analysis has predicted stable flow at asymptotically long times [Phys. Fluids A 9, 3645 (1997)]. A more recent transient analysis has revealed large amplification in the disturbance film thickness at early times [O. K. Matar and S. M. Troian, "Growth of nonmodal transient structures during the spreading of surfactant coated films," Phys. Fluids A 10, 1234 (1998)]. In this paper, we report results of an extended sensitivity analysis which probes two aspects of the flow: the time variant character of the base state and the non-normal character of the disturbance operators. The analysis clearly identifies Marangoni forces as the main source of digitation for both small and large wave number disturbances. Furthermore, initial conditions which increase the initial shear stress or which steepen the shape of the advancing front produce a larger transient response and deeper corrugations in the film. Disturbances applied just ahead of the deposited monolayer rapidly fall behind the advancing front eventually settling in the upstream region where their mobility is hampered. Recent findings confirm that additional forces which promote film thinning can further intensify disturbances [O. K. Matar and S. M. Troian, "Spreading of surfactant monolayer on a thin liquid film: Onset and evolution of digitated structures," Chaos 9, 141 (1999). The transient analysis presented here corroborates our previous results for asymptotic stability but reveals a source for digitation at early times. The energy decomposition lends useful insight into the actual mechanisms preventing efficacious distribution of surfactant
First principles investigation of the electronic structure of La2MnNiO6: A room-temperature insulating ferromagnet
Using first principles calculations within DFT based on the full potential
APW+lo method, we calculated the electronic and magnetic structures for the
ferromagnetic and antiferromagnetic states of La2MnNiO6 and analyzed the site
projected density of states and electronic band structures. Our calculations
show that the ground state of La2MnNiO6 is ferromagnetic insulating with the
magnetization in agreement with Hund's first rule and experimental findings.Comment: 10 pages, 3 figure
Interplay of Chemical Bonding and Magnetism in Fe_4N, Fe_3N, Fe_2N
Using spin density functional theory we have carried out a comparative study
of chemical bonding and magnetism in Fe_4N, Fe_3N and Fe_2N. All of these
compounds form close packed Fe lattices, while N occupies octahedral
interstitial positions. High spin fcc Fe and hypothetical FeN with rock salt
structure have been included in our study as reference systems. We find strong,
covalent Fe-N bonds as a result of a substantial \sigma-type p-d hybridisation,
with some charge transfer to N. Those Fe d orbitals which contribute to the p-d
bonds, do no longer participate in the exchange splitting of the Fe d bands.
Because of the large exchange fields, the majority spin d bands are always
fully occupied, while the minority spin d bands are close to half-filling, thus
optimizing the Fe d-d covalent bonding. As a consequence, in good approximation
the individual Fe moments decrease in steps of 0.5 \mu_B from fcc iron (2.7
\mu_B) via Fe_4N (2.7 and 1.97 mu_B}), \chem{Fe_3N} (1.99 \mu_B) to \zeta -
Fe_2N (1.43 \mu_B).Comment: 16 pages, 15 figure
Role of heat generation and thermal diffusion during frontal photopolymerization
Frontal photopolymerization (FPP) is a rapid and versatile solidification process that can be used to fabricate complex three-dimensional structures by selectively exposing a photosensitive monomer-rich bath to light. A characteristic feature of FPP is the appearance of a sharp polymerization front that propagates into the bath as a planar traveling wave. In this paper, we introduce a theoretical model to determine how heat generation during photopolymerization influences the kinetics of wave propagation as well as the monomer-to-polymer conversion profile, both of which are relevant for FPP applications and experimentally measurable. When thermal diffusion is sufficiently fast relative to the rate of polymerization, the system evolves as if it were isothermal. However, when thermal diffusion is slow, a thermal wavefront develops and propagates at the same rate as the polymerization front. This leads to an accumulation of heat behind the polymerization front which can result in a significant sharpening of the conversion profile and acceleration of the growth of the solid. Our results also suggest that a novel way to tailor the dynamics of FPP is by imposing a temperature gradient along the growth directio
Spreading characteristics of an insoluble surfactant film on a thin liquid layer: comparison between theory and experiment
We describe measurements of the surface slope and reconstruction of the interface shape during the spreading of an oleic acid film on the surface of a thin aqueous glycerol mixture. This experimental system closely mimics the behaviour of an insoluble surfactant film driven to spread on a thin viscous layer under the action of a tangential (Marangoni) surface stress. Refracted image Moiré topography is used to monitor the evolution of the surface slope over macroscopic distances, from which the time variant interface shape and advancing speed of the surfactant film are inferred. The interfacial profile exhibits a strong surface depression ahead of the surfactant source capped by an elevated rim at the surfactant leading edge. The surface slope and shape as well as the propagation characteristics of the advancing rim can be compared directly with theoretical predictions. The agreement is quite strong when the model allows for a small level of pre-existing surface contamination of the initial liquid layer. Comparison between theoretical and experimental profiles reveals the importance of the initial shear stress in determining the evolution in the film thickness and surfactant distribution. This initial stress appears to thin the underlying liquid support so drastically that the surfactant droplet behaves as a finite and not an infinite source, even though there is always an excess of surfactant present at the origin
Droplets displacement and oscillations induced by ultrasonic surface acoustic waves: a quantitative study
We present an experimental study of a droplet interacting with an ultrasonic
surface acoustic wave (SAW). Depending on the amplitude of the wave, the drop
can either experience an internal flow with its contact-line pinned, or (at
higher amplitude) move along the direction of the wave also with internal flow.
Both situations appear together with oscillations of the drop free-surface. The
physical origins of the internal mixing flow as well as the drop displacement
and surface waves are still not well understood. In order to give insights of
the underlying physics involved in these phenomena, we carried out an
experimental and numerical study. The results suggest that the surface
deformation of the drop can be related as a combination between acoustic
streaming effect and radiation pressure inside the drop.Comment: 9 pages, 14 figures. To appear in Physical Review
- …