105 research outputs found

    Journal télévisé et trajets visuels

    Get PDF
    L'article se propose d'analyser, à l'aide d'une grille spécifique, les données temporelles, visuelles et sonores du journal télévisé du matin d'Antenne 2. C'est surtout la notion d'espace qui est, ici, analysée, notamment au travers de l'analyse précise de la mise en scène du plateau télévisé et des changements d'écrans lors du montage. Deux types de trajets visuels (exogènes et endogènes) sont distingués, ils permettent une meilleure lecture de cet objet informationnel, ce qui peut-être réinvesti dans des exercices pédagogiques

    Streamflow forecasting using functional regression

    Get PDF
    Streamflow, as a natural phenomenon, is continuous in time and so are the meteorological variables which influence its variability. In practice, it can be of interest to forecast the whole flow curve instead of points (daily or hourly). To this end, this paper introduces the functional linear models and adapts it to hydrological forecasting. More precisely, functional linear models are regression models based on curves instead of single values. They allow to consider the whole process instead of a limited number of time points or features. We apply these models to analyse the flow volume and the whole streamflow curve during a given period by using precipitations curves. The functional model is shown to lead to encouraging results. The potential of functional linear models to detect special features that would have been hard to see otherwise is pointed out. The functional model is also compared to the artificial neural network approach and the advantages and disadvantages of both models are discussed. Finally, future research directions involving the functional model in hydrology are presented

    Toward an Improved Air Pollution Warning System in Quebec.

    Get PDF
    The nature of pollutants involved in smog episodes can vary significantly in various cities and contexts and will impact local populations differently due to actual exposure and pre-existing sensitivities for cardiovascular or respiratory diseases. While regulated standards and guidance remain important, it is relevant for cities to have local warning systems related to air pollution. The present paper proposes indicators and thresholds for an air pollution warning system in the metropolitan areas of Montreal and Quebec City (Canada). It takes into account past and current local health impacts to launch its public health warnings for short-term episodes. This warning system considers fine particulate matter (PM2.5) as well as the combined oxidant capacity of ozone and nitrogen dioxide (Ox) as environmental exposures. The methodology used to determine indicators and thresholds consists in identifying extreme excess mortality episodes in the data and then choosing the indicators and thresholds to optimize the detection of these episodes. The thresholds found for the summer were 31 ÎĽg/m3 for PM2.5 and 43 ppb for Ox in Montreal, and 32 ÎĽg/m3 and 23 ppb in Quebec City. In winter, thresholds found were 25 ÎĽg/m3 and 26 ppb in Montreal, and 33 ÎĽg/m3 and 21 ppb in Quebec City. These results are in line with different guidelines existing concerning air quality, but more adapted to the cities examined. In addition, a sensitivity analysis is conducted which suggests that Ox is more determinant than PM2.5 in detecting excess mortality episodes

    Excess mortality attributed to heat and cold: a health impact assessment study in 854 cities in Europe

    Get PDF
    Background: Heat and cold are established environmental risk factors for human health. However, mapping the related health burden is a difficult task due to the complexity of the associations and the differences in vulnerability and demographic distributions. In this study, we did a comprehensive mortality impact assessment due to heat and cold in European urban areas, considering geographical differences and age-specific risks. Methods: We included urban areas across Europe between Jan 1, 2000, and Dec 12, 2019, using the Urban Audit dataset of Eurostat and adults aged 20 years and older living in these areas. Data were extracted from Eurostat, the Multi-country Multi-city Collaborative Research Network, Moderate Resolution Imaging Spectroradiometer, and Copernicus. We applied a three-stage method to estimate risks of temperature continuously across the age and space dimensions, identifying patterns of vulnerability on the basis of city-specific characteristics and demographic structures. These risks were used to derive minimum mortality temperatures and related percentiles and raw and standardised excess mortality rates for heat and cold aggregated at various geographical levels. Findings: Across the 854 urban areas in Europe, we estimated an annual excess of 203620 (empirical 95% CI 180882-224 613) deaths attributed to cold and 20 173 (17 261-22934) attributed to heat. These corresponded to age-standardised rates of 129 (empirical 95% CI 114-142) and 13 (11-14) deaths per 100000 person-years. Results differed across Europe and age groups, with the highest effects in eastern European cities for both cold and heat. Interpretation: Maps of mortality risks and excess deaths indicate geographical differences, such as a north-south gradient and increased vulnerability in eastern Europe, as well as local variations due to urban characteristics. The modelling framework and results are crucial for the design of national and local health and climate policies and for projecting the effects of cold and heat under future climatic and socioeconomic scenarios. Funding: Medical Research Council of UK, the Natural Environment Research Council UK, the EU's Horizon 2020, and the EU's Joint Research Center

    A new look at weather-related health impacts through functional regression.

    Get PDF
    A major challenge of climate change adaptation is to assess the effect of changing weather on human health. In spite of an increasing literature on the weather-related health subject, many aspect of the relationship are not known, limiting the predictive power of epidemiologic models. The present paper proposes new models to improve the performances of the currently used ones. The proposed models are based on functional data analysis (FDA), a statistical framework dealing with continuous curves instead of scalar time series. The models are applied to the temperature-related cardiovascular mortality issue in Montreal. By making use of the whole information available, the proposed models improve the prediction of cardiovascular mortality according to temperature. In addition, results shed new lights on the relationship by quantifying physiological adaptation effects. These results, not found with classical model, illustrate the potential of FDA approaches

    Aggregating the response in time series regression models, applied to weather-related cardiovascular mortality.

    Get PDF
    In environmental epidemiology studies, health response data (e.g. hospitalization or mortality) are often noisy because of hospital organization and other social factors. The noise in the data can hide the true signal related to the exposure. The signal can be unveiled by performing a temporal aggregation on health data and then using it as the response in regression analysis. From aggregated series, a general methodology is introduced to account for the particularities of an aggregated response in a regression setting. This methodology can be used with usually applied regression models in weather-related health studies, such as generalized additive models (GAM) and distributed lag nonlinear models (DLNM). In particular, the residuals are modelled using an autoregressive-moving average (ARMA) model to account for the temporal dependence. The proposed methodology is illustrated by modelling the influence of temperature on cardiovascular mortality in Canada. A comparison with classical DLNMs is provided and several aggregation methods are compared. Results show that there is an increase in the fit quality when the response is aggregated, and that the estimated relationship focuses more on the outcome over several days than the classical DLNM. More precisely, among various investigated aggregation schemes, it was found that an aggregation with an asymmetric Epanechnikov kernel is more suited for studying the temperature-mortality relationship

    EMD-regression for modelling multi-scale relationships, and application to weather-related cardiovascular mortality.

    Get PDF
    In a number of environmental studies, relationships between nat4ural processes are often assessed through regression analyses, using time series data. Such data are often multi-scale and non-stationary, leading to a poor accuracy of the resulting regression models and therefore to results with moderate reliability. To deal with this issue, the present paper introduces the EMD-regression methodology consisting in applying the empirical mode decomposition (EMD) algorithm on data series and then using the resulting components in regression models. The proposed methodology presents a number of advantages. First, it accounts of the issues of non-stationarity associated to the data series. Second, this approach acts as a scan for the relationship between a response variable and the predictors at different time scales, providing new insights about this relationship. To illustrate the proposed methodology it is applied to study the relationship between weather and cardiovascular mortality in Montreal, Canada. The results shed new knowledge concerning the studied relationship. For instance, they show that the humidity can cause excess mortality at the monthly time scale, which is a scale not visible in classical models. A comparison is also conducted with state of the art methods which are the generalized additive models and distributed lag models, both widely used in weather-related health studies. The comparison shows that EMD-regression achieves better prediction performances and provides more details than classical models concerning the relationship

    French Science Communication on YouTube: A Survey of Individual and Institutional Communicators and Their Channel Characteristics

    Get PDF
    Science videos on YouTube attract millions of viewers each month, but little is known about who the content producers are, how they work and what their motivations and qualifications are. Here, we analyze the characteristics of 622 French YouTube science channels and 70,795 science videos in French, and complement this analysis with a survey of 180 of these youtubers. We focus on three questions: who are the science communicators (sociodemographics, resources, and goals), what are the characteristics of their channels, and are there differences between institutional and non-institutional communicators. We show that French science communicators on YouTube are mostly young men, highly qualified and usually talking about their topic of expertize. Many of them do not earn enough money to make a living out of this activity and have to use personal money to run their channels. At the same time, many are not interested in making this activity their main source of income. Their main goal is to share science and stimulate curiosity, as opposed to teach and entertain. While a small number of channels account for most of the views and subscribers, together they are able to cover a lot of scientific disciplines, with individuals usually focusing on a couple of fields and institutions talking about more diverse subjects. Institutions seem to have less success on YouTube than individuals, a result visible both in the number of subscribers and engagement received in videos (likes and comments). We discuss the potential factors behind this discrepancy, such as the lack of personality of institutional channels, the high number of topics they cover or the fact that institutions usually have an additional goal compared to individuals: to present and promote the institution itself. A video version of this article has been recorded and made available here: https://stephanedebove.net/youtube</jats:p

    Data-Enhancement Strategies in Weather-Related Health Studies.

    Get PDF
    Although the relationship between weather and health is widely studied, there are still gaps in this knowledge. The present paper proposes data transformation as a way to address these gaps and discusses four different strategies designed to study particular aspects of a weather-health relationship, including (i) temporally aggregating the series, (ii) decomposing the different time scales of the data by empirical model decomposition, (iii) disaggregating the exposure series by considering the whole daily temperature curve as a single function, and (iv) considering the whole year of data as a single, continuous function. These four strategies allow studying non-conventional aspects of the mortality-temperature relationship by retrieving non-dominant time scale from data and allow to study the impact of the time of occurrence of particular event. A real-world case study of temperature-related cardiovascular mortality in the city of Montreal, Canada illustrates that these strategies can shed new lights on the relationship and outlines their strengths and weaknesses. A cross-validation comparison shows that the flexibility of functional regression used in strategies (iii) and (iv) allows a good fit of temperature-related mortality. These strategies can help understanding more accurately climate-related health

    Flood frequency analysis at ungauged catchments with the GAM and MARS approaches in the Montreal region, Canada

    Get PDF
    Regional frequency analysis (RFA) aims to estimate quantiles of extreme hydrological variables (e.g. floods or low-flows) at sites where little or no hydrological data is available. This information is of interest for the optimal planning and management of water resources. A number of regional estimation models are evaluated and compared in this study and then used for regional estimation of flood quantiles at ungauged catchments located in the Montreal region in southern Quebec, Canada. In this study, two neighborhood approaches using canonical correlation analysis (CCA) and the region of influence (ROI) method are applied to delineate homogenous regions. Three regression methods namely log-linear regression model (LLRM), generalized additive models (GAM), and multivariate adaptive regression splines (MARS), recently introduced in the RFA context, are considered for regional estimation. These models are also applied considering all stations (ALL). The considered models, especially MARS, have never been used previously in a concrete application. Results indicate that MARS and GAM have comparable predictive performances, especially when applied with the whole dataset. Results also show that MARS used in combination with the CCA approach provide improved performances compared to all considered regional approaches. This may reflect the flexibility of the combination of these two approaches, their robustness, and their ability to better reproduce the hydrological phenomena, especially in real-world conditions when limited data are available
    • …
    corecore