28,064 research outputs found
Quantum fluctuations in the spiral phase of the Hubbard model
We study the magnetic excitations in the spiral phase of the two--dimensional
Hubbard model using a functional integral method. Spin waves are strongly
renormalized and a line of near--zeros is observed in the spectrum around the
spiral pitch . The possibility of disordered spiral states is
examined by studying the one--loop corrections to the spiral order parameter.
We also show that the spiral phase presents an intrinsic instability towards an
inhomogeneous state (phase separation, CDW, ...) at weak doping. Though phase
separation is suppressed by weak long--range Coulomb interactions, the CDW
instability only disappears for sufficiently strong Coulomb interaction.Comment: Figures are NOW appended via uuencoded postscript fil
Thermal conductivity and resonant multipole interactions
The influence of multipole interactions on exchanges of rotational energy in molecular collisions was investigated by means of a simple two-state impact parameter approximation. The calculations are restricted to linear molecules and to dipole and quadrupole fields. The effects of such exchanges on the thermal conductivity of gases and of gaseous mixtures was investigated, after correcting the kinetic theory of mixtures to include exchanges between unlike molecules. It was found that dipole-quadrupole and quadrupole-quadrupole interactions may have a significant effect for molecules with low moments of inertia. In particular, quadrupole interactions are important in the hydrogen isotopes, and the calculated corrections for H2 are consistent with recent experimental work by Harris. The theory seems capable of accounting for the anomalies observed in HF + DF and HCl + DCl mixtures in terms of multipolar accidental resonances
The mixing of interplanetary magnetic field lines: A significant transport effect in studies of the energy spectra of impulsive flares
Using instrumentation on board the ACE spacecraft we describe short-time scale (~3 hour) variations observed in the arrival profiles of ~20 keV nucleon^(–1) to ~2 MeV nucleon^(–1) ions from impulsive solar flares. These variations occurred simultaneously across all energies and were generally not in coincidence with any local magnetic field or plasma signature. These features appear to be caused by the convection of magnetic flux tubes past the observer that are alternately filled and devoid of flare ions even though they had a common flare source at the Sun. In these particle events we therefore have a means to observe and measure the mixing of the interplanetary magnetic field due to random walk. In a survey of 25 impulsive flares observed at ACE between 1997 November and 1999 July these features had an average time scale of 3.2 hours, corresponding to a length of ~0.03 AU. The changing magnetic connection to the flare site sometimes lead to an incomplete observation of a flare at 1 AU; thus the field-line mixing is an important effect in studies of impulsive flare energy spectra
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling
A novel solid freeform fabrication method has been developed for the manufacture of
ceramic-based components in an environmentally friendly fashion. The method is based on the
extrusion of ceramic slurries using water as the binding media. Aluminum oxide (Al2O3) is
currently being used as the part material and solids loading as high as 60 vol. % has been
achieved. This paper describes a manufacturing machine that has been developed for the
extrusion of high solids loading ceramic slurries. A critical component of the machine is the
deposition system, which consists of a syringe, a plunger, a ram actuated by a motor that forces
the plunger down to extrude material, and a load cell to measure the extrusion force. An
empirical, dynamic model of the ceramic extrusion process, where the input is the commanded
ram velocity and the output is the extrusion force, is developed. Several experiments are
conducted and empirical modeling techniques are utilized to construct the dynamic model. The
results demonstrate that the ceramic extrusion process has a very slow dynamic response, as
compared to other non-compressible fluids such as water. A substantial amount of variation
exists in the ceramic extrusion process, most notably in the transient dynamics, and a constant
ram velocity may either produce a relatively constant steady-state extrusion force or it may cause
the extrusion force to steadily increase until the ram motor skips. The ceramic extrusion process
is also subjected to significant disturbances such as air bubble release, which causes a dramatic
decrease in the extrusion force, and nozzle clogging, which causes the extrusion force to slowly
increase until the clog is released or the ram motor skips.Mechanical Engineerin
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part II: Extrusion Process Control
Part I of this paper provided a detailed description of a novel fabrication machine for high solids
loading ceramic slurry extrusion and presented an empirical model of the ceramic extrusion
process, with ram velocity as the input and extrusion force as the output. A constant force is
desirable in freeform extrusion processes as it correlates with a constant material deposition rate
and, thus, good part quality. The experimental results in Part I demonstrated that a constant ram
velocity will produce a transient extrusion force. In some instances the extrusion force increased
until ram motor skipping occurred. Further, process disturbances, such as air bubble release and
nozzle clogging that cause sudden changes in extrusion force, were often present. In this paper a
feedback controller for the ceramic extrusion process is designed and experimentally
implemented. The controller intelligently adjusts the ram motor velocity to maintain a constant
extrusion force. Since there is tremendous variability in the extrusion process characteristics, an
on-off controller is utilized in this paper. Comparisons are made between parts fabricated with
and without the feedback control. It is demonstrated that the use of the feedback control reduces
the effect of process disturbances (i.e., air bubble release and nozzle clogging) and dramatically
improves part quality.Mechanical Engineerin
Pressure and force data for a flat wing and a warped conical wing having a shockless recompression at Mach 1.62
A conical nonlinear flow computer code was used to design a warped (cambered) wing which would produce a supercritical expansion and shockless recompression of the crossflow at a lift coefficient of 0.457, an angle of attack of 10 deg, and a Mach number of 1.62. This cambered wing and a flat wing the same thickness distribution were tested over a range of Mach numbers from 1.6 to 2.0. For both models the forward 60 percent is purely conical geometry. Results obtained with the cambered wing demonstrated the design features of a supercritical expansion and a shockless recompression, whereas results obtained with the flat wing indicated the presence of crossflow shocks. Tables of experimental pressure, force, and moment data are included, as well as selected oil flow photographs
ON SPEECH AND SPEAKER RECOGNITION USING NEURAL NET MODELS
The field of digital speech processing may be divided into three distinct and somewhat in-
dependent applications, namely speech recognition, speaker recognition and speech com-
munications. Linear-predictive (LP) analysis techniques are used in all three areas to
provide a compact signal representation that has a high information content.
This paper examines the somewhat conflicting tasks of speech and speaker recog-
nition using perceptually based LP features. Using the recently developed multi-layer
perceptron it is possible to construct a single architecture that may be trained to perform
either one of these tasks using identical speech training data.
An Eset / 8 speaker and an alphabet / 26 speaker system are examined with both
5th and 14th order features. Both speech and speaker recognition tasks perform well
confirming that the same structure fed with identical inputs can achieve both goals. It
is found that the speaker specific information is contained predominantly in the higher
order feature coefficients, with speech specific information concentrated in the lower order
coefficients, confirming the results of Hermansky and Gu
Measurement of Newtonian fluid slip using a torsional ultrasonic oscillator
The composite torsional ultrasonic oscillator, a versatile experimental
system, can be used to investigate slip of Newtonian fluid at a smooth surface.
A rigorous analysis of slip-dependent damping for the oscillator is presented.
Initially, the phenomenon of finite surface slip and the slip length are
considered for a half-space of Newtonian fluid in contact with a smooth,
oscillating solid surface. Definitions are revisited and clarified in light of
inconsistencies in the literature. We point out that, in general oscillating
flows, Navier's slip length b is a complex number. An intuitive velocity
discontinuity parameter of unrestricted phase is used to describe the effect of
slip on measurement of viscous shear damping. The analysis is applied to the
composite oscillator and preliminary experimental work for a 40 kHz oscillator
is presented. The Non-Slip Boundary Condition (NSBC) has been verified for a
hydrophobic surface in water to within ~60 nm of |b|=0 nm. Experiments were
carried out at shear rate amplitudes between 230 and 6800 /s, corresponding to
linear displacement amplitudes between 3.2 and 96 nm.Comment: Revised with minor edits for revie
- …