Cell membrane permeability and antioxidant activities in the rootstocks of Miscanthus x giganteus as an effect of cold and frost treatment

The aim of the study was to estimate the ability of Miscanthus x giganteus to acquire frost tolerance. Field grown rootstocks were transferred into pots and cultivated in a glasshouse at 20°C. After 5 weeks plants were pre-hardened at 12°C for a further 2 weeks and then hardened at 5°C for another 3 weeks. After this time, plants were frozen at -8°C or -15°C for 1, 3 or 5 days, after which their regrowth at 20°C was investigated. The membrane permeability (electrolyte leakage), activity of the catalase (CAT), non-specific peroxidase (PX), and protein content in stolons were measured, before and after pre-hardening, as well as after hardening and freezing. Both pre-hardening and hardening decreased membrane permeability of the rootstock cells, and this effect was observed further, after 5-week of regrowth at 20°C. Freezing at both temperatures increased ion leakage gradually over the period of treatment. On the basis of total ion content, damage to the cell membranes of frozen stolons after recovery was state. Prehardening increased CAT activity, while hardening did not alter it. However, after 5-week de-hardening, CAT activity decreased significantly. Freezing at -8°C for 5 days increased significantly the activity of this enzyme. At -15°C CAT activity was lower than in the control after only one day of freezing. PX activity decreased both in the rootstocks of cold (12°C and 5°C) and frost treated plants. Protein content increased significantly in the stolons of both pre-hardened and hardened plants, although not immediately after cold treatment, but only after a 5-week re-growth period in a glasshouse at 20°C. This phenomenon was observed also in the stolons of plants frozen at -15°C for 5 days. From frozen rootstocks no new stems in regrowth conditions were obtained. The results obtained indicated, that although frozen stolons cannot produce new shoots, they do demonstrate some metabolic vitality. So, it could be supposed that the frost susceptibility of studied plants resulted from the strong sensitivity of shoot apical meristems to the cold. Further studies will analyse the survival of Miscanthus in milder frost temperatures

Agdc1p - a gallic acid decarboxylase involved in the degradation of tannic acid in the yeast Blastobotrys (Arxula) adeninivorans

Tannins and hydroxylated aromatic acids, such as gallic acid (3,4,5-trihydroxybenzoic acid), are plant secondary metabolites which protect plants against herbivores and plant-associated microorganisms. Some microbes, such as the yeast Arxula adeninivorans are resistant to these antimicrobial substances and are able to use tannins and gallic acid as carbon sources. In this study, the Arxula gallic acid decarboxylase (Agdc1p) which degrades gallic acid to pyrogallol was characterized and its function in tannin catabolism analyzed. The enzyme has a higher affinity for gallic acid (Km -0.7 ± 0.2 mM, kcat -42.0 ± 8.2 s-1) than to protocatechuic acid (3,4-dihydroxybenzoic acid) (Km -3.2 ± 0.2 mM, kcat -44.0 ± 3.2 s-1). Other hydroxylated aromatic acids, such as 3-hydroxybenzoic acid, 4-hydroxybenzoic acid, 2,3-dihydroxybenzoic acid, 2,4-dihydroxybenzoic acid and 2,5-dihydroxybenzoic acid are not gallic acid decarboxylase substrates. A. adeninivorans G1212/YRC102-AYNI1-AGDC1, which expresses the AGDC1 gene under the control of the strong nitrate inducible AYNI1 promoter achieved a maximum gallic acid decarboxylase activity of 1064.4 U/l and 97.5 U/g of dry cell weight in yeast grown in minimal medium with nitrate as nitrogen source and glucose as carbon source. In the same medium, gallic acid decarboxylase activity was not detected for the control strain G1212/YRC102 with AGDC1 expression under the control of the endogenous promoter. Gene expression analysis showed that AGDC1 is induced by gallic acid and protocatechuic acid. In contrast to G1212/YRC102-AYNI1-AGDC1 and G1212/YRC102, A. adeninivorans G1234 [δagdc1] is not able to grow on medium with gallic acid as carbon source but can grow in presence of protocatechuic acid. This confirms that Agdc1p plays an essential role in the tannic acid catabolism and could be useful in the production of catechol and cis, cis-muconic acid. However, the protocatechuic acid catabolism via Agdc1p to catechol seems to be not the only degradation pathway

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

Surface Potential Driven Water Harvesting from Fog.

Access to clean water is a global challenge, and fog collectors are a promising solution. Polycarbonate (PC) fibers have been used in fog collectors but with limited efficiency. In this study, we show that controlling voltage polarity and humidity during the electrospinning of PC fibers improves their surface properties for water collection capability. We experimentally measured the effect of both the surface morphology and the chemistry of PC fiber on their surface potential and mechanical properties in relation to the water collection efficiency from fog. PC fibers produced at high humidity and with negative voltage polarity show a superior water collection rate combined with the highest tensile strength. We proved that electric potential on surface and morphology are crucial, as often designed by nature, for enhancing the water collection capabilities via the single-step production of fibers without any postprocessing needs

Oral Anticoagulant Therapy Prescription in Patients With Atrial Fibrillation Across the Spectrum of Stroke Risk: Insights From the NCDR PINNACLE Registry

IMPORTANCE: Patients with atrial fibrillation (AF) are at a proportionally higher risk of stroke based on accumulation of well-defined risk factors. OBJECTIVE: To examine the extent to which prescription of an oral anticoagulant (OAC) in US cardiology practices increases as the number of stroke risk factors increases. DESIGN, SETTING, AND PARTICIPANTS: Cross-sectional registry study of outpatients with AF enrolled in the American College of Cardiology National Cardiovascular Data Registry's PINNACLE (Practice Innovation and Clinical Excellence) Registry between January 1, 2008, and December 30, 2012. As a measure of stroke risk, we calculated the CHADS2 score and the CHA2DS2-VASc score for all patients. Using multinomial logistic regression models adjusted for patient, physician, and practice characteristics, we examined the association between increased stroke risk score and prescription of an OAC. MAIN OUTCOMES AND MEASURES: The primary outcome was prescription of an OAC with warfarin sodium or a non-vitamin K antagonist OAC. RESULTS: The study cohort comprised 429 417 outpatients with AF. Their mean (SD) age was 71.3 (12.9) years, and 55.8% were male. Prescribed treatment consisted of an OAC (192 600 [44.9%]), aspirin only (111 134 [25.9%]), aspirin plus a thienopyridine (23 454 [5.5%]), or no antithrombotic therapy (102 229 [23.8%]). Each 1-point increase in risk score was associated with increased odds of OAC prescription compared with aspirin-only prescription using the CHADS2 score (adjusted odds ratio, 1.158; 95% CI, 1.144-1.172; P < .001) and the CHA2DS2-VASc score (adjusted odds ratio, 1.163; 95% CI, 1.157-1.169; P < .001). Overall, OAC prescription prevalence did not exceed 50% even in higher-risk patients with a CHADS2 score exceeding 3 or a CHA2DS2-VASc score exceeding 4. CONCLUSIONS AND RELEVANCE: In a large quality improvement registry of outpatients with AF, prescription of OAC therapy increased with a higher CHADS2 score and CHA2DS2-VASc score. However, a plateau of OAC prescription was observed, with less than half of high-risk patients receiving an OAC prescription

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting.

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting.

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

How simple can a model of an empty viral capsid be? Charge distributions in viral capsids

We investigate and quantify salient features of the charge distributions on viral capsids. Our analysis combines the experimentally determined capsid geometry with simple models for ionization of amino acids, thus yielding the detailed description of spatial distribution for positive and negative charge across the capsid wall. The obtained data is processed in order to extract the mean radii of distributions, surface charge densities and dipole moment densities. The results are evaluated and examined in light of previously proposed models of capsid charge distributions, which are shown to have to some extent limited value when applied to real viruses.Comment: 10 pages, 10 figures; accepted for publication in Journal of Biological Physic