Molecular organization of antibiotic amphotericin B in dipalmitoylphosphatidylcholine monolayers induced by K+ and Na+ ions: The Langmuir technique study

AbstractThe effect of potassium (K+) and sodium (Na+) ions on the self-association of antibiotic amphotericin B (AmB) in the lipid membrane was reported. Mixed Langmuir monolayers of AmB and dipalmitoylphosphatidylcholine (DPPC) were investigated by recording surface pressure–area isotherms spread on aqueous buffers containing physiological concentration of K+ and Na+ ions. The analyses of the π–A isotherms and compressional modulus curves indicate the interactions in the AmB–DPPC system. The strength of the AmB–DPPC interactions and the stability of the mixed monolayers were examined on the basis of the excess free energy of mixing values. The obtained results proved a high affinity of AmB towards lipids induced by the presence of K+ than Na+ ions. The most stable monolayers in the presence of K+ and Na+ ions were formed by AmB and DPPC with the 1:1 and 2:1 stoichiometry. The understanding of the AmB aggregation processes at the molecular level should contribute to elucidate the mechanisms of action and toxicity of this widely used drug. The presented results are potentially valuable in respect to develop more efficient and less toxic AmB formulations

Structure and Physical Properties of Cardamonin: A Spectroscopic and Computational Approach

This is the first study of the crystal structure of cardamonin (CA) confirmed using single-crystal XRD analysis. In the crystal lattice of CA, two symmetry independent molecules are linked by hydrogen bonds within the layers and by the π···π stacking interactions in the columns which lead to the occurrence of two types of conformations among the CA molecules in the crystal structure. To better understand the stability of these arrangements in both crystals and the gaseous phase, seven different CA dimers were theoretically calculated. The molecular structures were optimized using density functional theory (DFT) at the B3LYP/6–311G+(d,p) level and the spectroscopic results were compared. It was found that the calculated configurations of dimer I and III were almost identical to the ones found in the CA crystal lattice. The calculated UV-Vis spectra for the CA monomer and dimer I were perfectly consistent with the experimental spectroscopic data. Furthermore, enhanced emissions induced by aggregated CA molecules were registered in the aqueous solution with the increase of water fractions. The obtained results will help to further understand the relation between a variety of conformations and the biological properties of CA, and the results are also promising in terms of the applicability of CA as a bioimaging probe to monitor biological processes

Effect of Psyllium Husk Addition on the Structural and Physical Properties of Biodegradable Thermoplastic Starch Film

The research subject was the analysis of the microstructure, barrier properties, and mechanical resistance of the psyllium husk (PH)-modified thermoplastic starch films. The tensile tests under various static loading conditions were not performed by researchers for this type of material before and are essential for a more precise assessment of the material’s behavior under the conditions of its subsequent use. The film samples were manufactured by the casting method. PH addition improved starch gelatinization and caused a decrease in failure strain by 86% and an increase in failure stress by 48% compared to pure films. Fourier transform infrared spectroscopy results showed the formation of additional hydrogen bonds between polysaccharides in starch and PH. An increase in the number of hydrophilic groups in the modified films resulted in a faster contact angle decrease (27.4% compared to 12.8% for pure ones within the first 5 s); however, it increased the energy of water binding and surface complexity. The modified films showed the opacity at 600 nm, 43% higher than in the pure starch film, and lower transmittance, suggesting effectively improving barrier properties to UV light, a potent lipid-oxidizing agent in food systems

Pulsed electric field (PEF) enhances iron uptake by the yeast Saccharomyces cerevisiae

The aim of the study was to investigate the influence of a pulsed electric field (PEF) on the level of iron ion accumulation in Saccharomyces cerevisiae cells and to select PEF conditions optimal for the highest uptake of this element. Iron ions were accumulated most efficiently when their source was iron (III) nitrate. When the following conditions of PEF treatment were used: voltage 1500 V, pulse width 10 µs, treatment time 20 min, and a number of pulses 1200, accumulation of iron ions in the cells from a 20 h-culture reached a maximum value of 48.01 mg/g dry mass. Application of the optimal PEF conditions thus increased iron accumulation in cells by 157% as compared to the sample enriched with iron without PEF. The second derivative of the FTIR spectra of iron-loaded and -unloaded yeast cells allowed us to determine the functional groups which may be involved in metal ion binding. The exposure of cells to PEF treatment only slightly influenced the biomass and cell viability. However, iron-enriched yeast (both with or without PEF) showed lower fermentative activity than a control sample. Thus obtained yeast biomass containing a high amount of incorporated iron may serve as an alternative to pharmacological supplementation in the state of iron deficiency

Cremophor EL Nano-Emulsion Monomerizes Chlorophyll a in Water Medium

In this paper, the application of a non-ionic detergent Cremophor EL for monomerization of chlorophyll a in an aqueous medium is studied. The spectrophotometric properties of chlorophyll a encapsulated into the Cremophor EL nano-emulsion system were characterized by electronic absorption, steady-state and time-resolved fluorescence as well as circular dichroism spectroscopy. The results have shown that chlorophyll a dissolves more efficiently in the aqueous medium containing low-level Cremophor (5 wt%) than at an ethanolic solution even in the concentration of 10−4 M. The molecular organization of the chlorophyll a in the Cremophor EL nano-micelles was also investigated by means of Raman spectroscopy. The spectral changes in the frequency of the C=O stretching group were used to distinguish the aggregation state of chlorophyll. It was revealed that chlorophyll a exists dominantly in the monomeric form in the Cremophor EL aqueous solution. The promising aspect of the use of Cremophor EL nano-emulsion as a delivery system is to maintain stable chlorophyll monomer in an aqueous medium. It would open the potential for a new, practical application of chlorophyll a in medicine, as a dietary supplement or studies on molecular organization of chlorophyll a in the well-defined artificial system

Acid–Base Properties of Xanthohumol: A Computational and Experimental Investigation

UV–vis spectrophotometry has been applied to determine acid dissociation constants of the prenylated chalcone xanthohumol. The p<i>K</i>_a values were compared with those derived from pH-metric titrations. The order of the deprotonation site in the xanthohumol molecule was estimated by quantum mechanical calculations as 2′-OH, 4′-OH, and 4-OH. Furthermore, the electronic and spectroscopic properties of xanthohumol have been investigated on the basis of the time-dependent density functional theory (TDDFT). The TDDFT method, combined with a hybrid exchange–correlation functional using the B3LYP and CAM-B3LYP levels of theory in conjunction with the SMD solvation model, was used to optimize all geometries and predict the excitation energies of the neutral form and ionized species of the chalcone depending on pH value. The computed results were in good agreement with the experimental data. Consideration of the acid–base profile in conjunction with other molecular properties has a great importance and has the potential to be used to further improve the bioavailability of xanthohumol

Naturally Occurring Chalcones with Aggregation-Induced Emission Enhancement Characteristics

In this paper, the natural chalcones: 2′-hydroxy-4,4′,6′-trimethoxychalcone (HCH), cardamonin (CA), xanthohumol (XN), isobavachalcone (IBC) and licochalcone A (LIC) are studied using spectroscopic techniques such as UV–vis, fluorescence spectroscopy, scanning electron microscopy (SEM) and single-crystal X-ray diffraction (XRD). For the first time, the spectroscopic and structural features of naturally occurring chalcones with varying numbers and positions of hydroxyl groups in rings A and B were investigated to prove the presence of the aggregation-induced emission enhancement (AIEE) effect. The fluorescence studies were carried out in the aggregate form in a solution and in a solid state. As to the results of spectroscopic analyses conducted in the solvent media, the selected mixtures (CH3OH:H2O and CH3OH:ethylene glycol), as well as the fluorescence quantum yield (ϕF) and SEM, confirmed that two of the tested chalcones (CA and HCH) exhibited effective AIEE behaviour. On the other hand, LIC showed a large fluorescence quantum yield and Stokes shift in the polar solvents and in the solid state. Moreover, all studied compounds were tested for their promising antioxidant activities via the utilisation of 1,1- diphenyl-2-picrylhydrazyl as a free-radical scavenging reagent as well as potential anti-neurodegenerative agents via their ability to act as acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE) inhibitors. Finally, the results demonstrated that licochalcone A, with the most desirable emission properties, showed the most effective antioxidant (DPPH IC50 29%) and neuroprotective properties (AChE IC50 23.41 ± 0.02 μM, BuChE IC50 42.28 ± 0.06 μM). The substitution pattern and the biological assay findings establish some relation between photophysical properties and biological activity that might apply in designing AIEE molecules with the specified characteristics for biological application

Solid Digestate—Physicochemical and Thermal Study

Biogas production is an important component of sustainable energy management. In addition to energy-rich biogas, this process also generates solid waste in the form of digestate. The management of this stream has been problematic for many years. One promising method of utilizing this fraction seems to be incineration under controlled conditions. This paper presents an analysis of mixtures of different digestates to assess their suitability for incineration. Four digestates based on corn silage CS and apple pomace AP were used as test fuel. The ultimate and proximate analysis showed that this fuel deviates from the standards accepted for pure biomass, but was found in other fuels, especially those treated as waste. This materials can be a valuable source of energy, but combustion needs be undertaken in special units. Moisture content of investigated digestate-type ranges from 11.9–12.2% and ash content ranges from 8.2% to 11.6%. This could lead to ash sintering and slugging problems, which are problematic, especially because it is not designed for such types of fuel boilers. The study showed correlations between the elemental composition and the course of basic combustion processes. The ultimate analysis of all mixtures shows that the shares of major elements looks similar. These results are connected with the thermogravimetric analysis TGA, which shows similar thermal decomposition for all four mixtures. It is valuable information because, in this special case, when we have mixtures of corn silage and apple pomace originated digestates, the changes in the ratio CS:AP will not affect combustion significantly

Do Curdlan Hydrogels Improved with Bioactive Compounds from Hop Exhibit Beneficial Properties for Skin Wound Healing?

Chronic wounds, among others, are mainly characterized by prolonged inflammation associated with the overproduction of reactive oxygen species and pro-inflammatory cytokines by immune cells. As a consequence, this phenomenon hinders or even precludes the regeneration process. It is known that biomaterials composed of biopolymers can significantly promote the process of wound healing and regeneration. The aim of this study was to establish whether curdlan-based biomaterials modified with hop compounds can be considered as promising candidates for the promotion of skin wound healing. The resultant biomaterials were subjected to an evaluation of their structural, physicochemical, and biological in vitro and in vivo properties. The conducted physicochemical analyses confirmed the incorporation of bioactive compounds (crude extract or xanthohumol) into the curdlan matrix. It was found that the curdlan-based biomaterials improved with low concentrations of hop compounds possessing satisfactory hydrophilicity, wettability, porosity, and absorption capacities. In vitro, tests showed that these biomaterials were non-cytotoxic, did not inhibit the proliferation of skin fibroblasts, and had the ability to inhibit the production of pro-inflammatory interleukin-6 by human macrophages stimulated with lipopolysaccharide. Moreover, in vivo studies showed that these biomaterials were biocompatible and could promote the regeneration process after injury (study on Danio rerio larvae model). Thus, it is worth emphasizing that this is the first paper demonstrating that a biomaterial based on a natural biopolymer (curdlan) improved with hop compounds may have biomedical potential, especially in the context of skin wound healing and regeneration