Cu_{2}O as nonmagnetic semiconductor for spin transport in crystalline oxide electronics

We probe spin transport in Cu_{2}O by measuring spin valve effect in La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co and La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/La_{0.7}Sr_{0.3}MnO_{3} epitaxial heterostructures. In La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co systems we find that a fraction of out-of-equilibrium spin polarized carrier actually travel across the Cu_{2}O layer up to distances of almost 100 nm at low temperature. The corresponding spin diffusion length dspin is estimated around 40 nm. Furthermore, we find that the insertion of a SrTiO_{3} tunneling barrier does not improve spin injection, likely due to the matching of resistances at the interfaces. Our result on dspin may be likely improved, both in terms of Cu_{2}O crystalline quality and sub-micrometric morphology and in terms of device geometry, indicating that Cu_{2}O is a potential material for efficient spin transport in devices based on crystalline oxides.Comment: 15 pages, 10 figure

Seebeck effect in the conducting LaAlO_{3}/SrTiO_{3} interface

The observation of metallic behavior at the interface between insulating oxides has triggered worldwide efforts to shed light on the physics of these systems and clarify some still open issues, among which the dimensional character of the conducting system. In order to address this issue, we measure electrical transport (Seebeck effect, Hall effect and conductivity) in LaAlO_{3}/SrTiO_{3} interfaces and, for comparison, in a doped SrTiO_{3} bulk single crystal. In these experiments, the carrier concentration is tuned, using the field effect in a back gate geometry. The combined analysis of all experimental data at 77 K indicates that the thickness of the conducting layer is ~7 nm and that the Seebeck effect data are well described by a two-dimensional (2D) density of states. We find that the back gate voltage is effective in varying not only the charge density, but also the thickness of the conducting layer, which is found to change by a factor of ~2, using an electric field between -4 and +4MV/m at 77K. No enhancement of the Seebeck effect due to the electronic confinement and no evidence for two-dimensional quantization steps are observed at the interfaces.Comment: 15 pages, 5 figure

The Crossover beteween Aslamazov-Larkin and Short Wavelength Fluctuations Regimes in HTS Conductivity Experiments

We present paraconductivity (AL) measurements in three different high temperature superconductors: a melt textured $YBa_2Cu_3O_7$ sample, a $Bi_2Sr_2CaCu_2O_8$ epitaxial thin film and a highly textured $Bi_2Sr_2Ca_2Cu_3O_{10}$ tape. The crossovers between different temperature regimes in excess conductivity have been analysed. The Lawrence-Doniach (LD) crossover, which separates the 2D and 3D regimes, shifts from lower to higher temperatures as the compound anisotropy decreases. Once the LD crossover is overcome, the fluctuation conductivity of the three compounds shows the same universal behaviour: for $\epsilon =\ln T/T_c > 0.23$ all the curves bend down according to the $1/\epsilon^3$ law. This asymptotic behaviour was theoretically predicted previously for the high temperature region where the short wavelength fluctuations (SWF) become important.Comment: 4 pages, Revtex, 1 PostScript figure available upon request ([email protected]); submitted to Physical Review B rapid communication

Giant Oscillating Thermopower at Oxide Interfaces

Understanding the nature of charge carriers at the LaAlO3/SrTiO3 interface is one of the major open issues in the full comprehension of the charge confinement phenomenon in oxide heterostructures. Here, we investigate thermopower to study the electronic structure in LaAlO3/SrTiO3 at low temperature as a function of gate field. In particular, under large negative gate voltage, corresponding to the strongly depleted charge density regime, thermopower displays record-high negative values of the order of 10^4 - 10^5 microV/K, oscillating at regular intervals as a function of the gate voltage. The huge thermopower magnitude can be attributed to the phonon-drag contribution, while the oscillations map the progressive depletion and the Fermi level descent across a dense array of localized states lying at the bottom of the Ti 3d conduction band. This study is the first direct evidence of a localized Anderson tail in the two-dimensional (2D) electron liquid at the LaAlO3/SrTiO3 interface.Comment: Main text: 28 pages and 3 figures; Supplementary information: 29 pages, 5 figures and 1 tabl

Origin of interface magnetism in BiMnO3/SrTiO3 and LaAlO3/SrTiO3 heterostructures

Possible ferromagnetism induced in otherwise non-magnetic materials has been motivating intense research in complex oxide heterostructures. Here we show that a confined magnetism is realized at the interface between SrTiO3 and two insulating polar oxides, BiMnO3 and LaAlO3. By using polarization dependent x-ray absorption spectroscopy, we find that in both cases the magnetic order is stabilized by a negative exchange interaction between the electrons transferred to the interface and local magnetic moments. These local magnetic moments are associated to Ti3+ ions at the interface itself for LaAlO3/SrTiO3 and to Mn3+ ions in the overlayer for BiMnO3/SrTiO3. In LaAlO3/SrTiO3 the induced magnetic moments are quenched by annealing in oxygen, suggesting a decisive role of oxygen vacancies in the stabilization of interfacial magnetism.Comment: 5 pages, 4 figure

Anomalous Nernst effect in the topological and magnetic material MnBi₄Te₇

The recently discovered magnetic topological insulators (MnBi2Te4)(Bi2Te3)n, n = 0–4, are an ideal playground to study the influence of magnetic properties on band topology, giving access to diverse quantum states in a single compound. In the low temperature-antiferromagnetic state and vanishing magnetic field, the n = 1 system is a topological insulator protected by a combination of time reversal and a translation symmetries. It has been argued that, when the antiferromagnetic phase is forced to a the fully spin polarized state by the application of an external magnetic field, this system develops Weyl cones in the conduction band, which become accessible in presence of an intrinsic electronic doping. In this work, we experimentally prove the raising of field-induced Weyl state through the detection of an intrinsic anomalous Nernst effect in a bulk single crystal of MnBi4Te7.</p

Influence of Mandrel s Surface on the Mechanical Properties of Joints Produced by Electromagnetic Compression

Electromagnetic compression of tubular profiles with high electrical conductivity is an innovative joining process for the manufacturing of lightweight structures. Taking conventional interference fits into account, the contact area s influence on the joint s quality seems to be of significance, as e.g. the contact area and the friction coefficient between the joining partners determine an allowed axial load or torsional momentum proportionally. Therefore, different contact area surfaces were prepared by shot peening and different machining operations and strategies. The mandrel s surfaces were prepared by shot peening with glass beads and Al2O3 particles. Alternatively, preparation was done using simultaneous five axis milling, because potential joining partners in lightweight frame structures within the Transregional Collaborative Research Centre SFB/TR10 would be manufactured similarly. After that, the manufactured surfaces were characterized by measuring the surface roughness and using confocal whitelight microscopy. After joining by electromagnetic compression, the influence of different mandrel s surface conditions on the joint s mechanical properties were analyzed by tensile tests. Finally, conclusions and design rules for the manufacturing of joints by electromagnetic compression are given

The Randomized Shortened Dental Arch Study: Tooth Loss

The evidence concerning the management of shortened dental arch (SDA) cases is sparse. This multi-center study was aimed at generating data on outcomes and survival rates for two common treatments, removable dental prostheses (RDP) for molar replacement or no replacement (SDA). The hypothesis was that the treatments lead to different incidences of tooth loss. We included 215 patients with complete molar loss in one jaw. Molars were either replaced by RDP or not replaced, according to the SDA concept. First tooth loss after treatment was the primary outcome measure. This event occurred in 13 patients in the RDP group and nine patients in the SDA group. The respective Kaplan-Meier survival rates at 38 months were 0.83 (95% CI: 0.74-0.91) in the RDP group and 0.86 (95% CI: 0.78-0.95) in the SDA group, the difference being non-significant

Development of design principles for form-fit joints in lightweight frame structures

Based on fundamental technological investigations, alternative joining strategies using electromagnetic forming (EMF) for the flexible production of lightweight frame structures are developed in the collaborative research project SFB/TR10. The results of these investigations will also be used to create general design principles for the joining process itself as well as for the joining zone. The focus of this article will be on dominating form-fit joints of aluminum frame structures and the parameters which have a significant influence on the strength of those joints. For the development of design principles regarding the joining zone, the groove geometry of the connection elements was varied in terms of size and shape, and the influence of those variations was analyzed. In terms of the joining process itself the effect on the joint strength of different forming pressures for a given groove geometry was also investigated. In the first step these experiments were performed on solid mandrels. In order to reduce the weight of the structure, experiments were then performed with hollow connection elements and similar groove geometries to analyze how the reduced stiffness of those elements affected the strength of the joints