Base and surge strategies for controlling environmental and economic costs in logistics triads

The aim of this paper is to determine the extent to which it is possible to establish a ‘base’ and ‘surge’ strategy for logistics provision with a particular emphasis on minimising environmental and economic costs. Our method is the combination of empirical research outputs on the impact of uncertainty on economic and environmental costs, and a synthesis of the literature on resilience and the role of flexibility therein. We find that logistics planners either build contingents into their schedules (a priori) or that they respond with contingencies (a posteriori). The former is associated with a ‘base‘ approach; an example of which may be the incorporation of ‘slack time‘ into a schedule to accommodate expected delays due to road congestion. The latter is equivalent to a ‘surge‘ approach where as an example the logistics provider may have capacity flexibility, in the form of spare vehicles, to accommodate post-plan changes in shipper volume requirements. This paper explicitly rationalises the links between uncertainty, ‘base’ and ‘surge’ supply chain strategies, and the strategic use of logistics flexibility, in minimising environmental and economic costs in a logistics triad. The output is in the form of a conceptual managerial feedback control system

Development of ligament tissue biodegradable devices: A review

This bibliographic review is focused on ligament tissue rehabilitation, its anatomy-physiology, and, mainly, on the dimensioning considerations of a composite material solution. The suture strength is problematic during the tissue recovering, implying reduction of mobility for several months. However, early postoperative active mobilization may enable a faster and more effective recovering of tissue biomechanical functions. As the risk of tendon rupture becomes a significant concern, a repair technique must be used to withstand the tensile forces generated by active mobilization. However, to avoid stress shielding effect on ligament tissue, an augmentation device must be designed on stiffness basis, that preferably will decrease. Absorbable biocomposite reinforcements have been used to allow early postoperative active mobilization and avoid the shortcomings of current repair solutions. Tensile strength decrease of the repair, during the initial inflammatory phase, is expected, derived from oedema and tendon degradation. In the fibroblastic phase, stiffness and strength will increase, which will stabilize during the remodeling phase. The reinforcement should be able to carry the dynamic load due to locomotion with a mechanical behavior similar to the undamaged natural tissue, during all rehabilitation process. Moreover, the degradation rate Must also be compatible with the ligament tissue recovering. The selection and combination of different biodegradable materials, in order to make the biocomposite reinforcement functionally compatible to the damaged sutured tissue, in terms of mechanical properties and degradation rate, is a major step on the design process. Modelling techniques allow pre-clinical evaluation of the reinforcement functional compatibility, and the optimization by comparison of different composite solutions in terms of biomechanical behavior

Bone mechanical stimulation with piezoelectric materials

This chapter summarized explores in vivo use of a piezoelectric polymer for bone mechanical stimulatio

Piezoelectric actuators for bone mechanical stimulation: exploring the concept.

Arthroplasty is liable to cause intense changes on strain levels and distribution in the boné surrounding the implant, namely stress shielding. Several solutions have been proposed for this, namely design variations and development of controlled-stiffness implants. A new approach to this problem, with potential application to other orthopaedic problems and other medical fields, would be the development of smart implants integrating systems for bone mechanical stimulation. Ideally, the implant should presente sensing capability and the ability to maintain physiological levels of strain at the implant interface. Piezoelectric materials’ huge potential as a mean to produce direct mechanical stimulation lies on the possibility of producing stimuli at a high range of frequencies and in multiple combinations. The present in vitro and preliminary in vivo studies were a first step towards the validation of the concept

Brain Abscess: a Rare Clinical Case with Oral Etiology

Brain abscess is a very rare condition but has a significant mortality rate. The three main routes of inoculation are trauma, contiguous focus, and the hematogenous route. The odontogenic focus is infrequent and is usually a diagnosis of exclusion. This paper presents a brain abscess case proven to be of dental origin, caused by Actinomyces meyeri and Fusobacterium nucleatum. This case highlights the risk underlying untreated dental disease and why oral infectious foci removal and good oral health are essential in primary care.info:eu-repo/semantics/publishedVersio

Enhanced Dispersion of Atrial Refractoriness as an Electrophysiological Substrate for Vulnerability to Atrial Fibrillation in Patients with Paroxysmal Atrial Fibrillation

Atrial electrical remodeling plays a part in recurrence of atrial fibrillation (AF). It has been related to an increase in heterogeneity of atrial refractoriness that facilitates the occurrence of multiple reentry wavelets and vulnerability to AF. AIM: To examine the relationship between dispersion of atrial refractoriness (Disp_A) and vulnerability to AF induction (A_Vuln) in patients with clinical paroxysmal AF (PAF). METHODS: Thirty-six patients (22 male; age 55+/-13 years) with > or =1 year of history of PAF (no underlying structural heart disease--n=20, systemic hypertension--n=14, mitral valve prolapse--n=1, surgically corrected pulmonary stenosis--n=1), underwent electrophysiological study (EPS) while off medication. The atrial effective refractory period (AERP) was assessed at five different sites--high (HRA) and low (LRA) lateral right atrium, high interatrial septum (IAS), proximal (pCS) and distal (dCS) coronary sinus--during a cycle length of 600 ms. AERP was taken as the longest S1-S2 interval that failed to initiate a propagation response. Disp_A was calculated as the difference between the longest and shortest AERP. A_Vuln was defined as the ability to induce AF with 1-2 extrastimuli or with incremental atrial pacing (600-300 ms) from the HRA or dCS. The EPS included analysis of focal electrical activity based on the presence of supraventricular ectopic beats (spontaneous or with provocative maneuvers). The patients were divided into group A--AF inducible (n=25) and group B--AF not inducible (n=11). Disp_A was analyzed to determine any association with A_Vuln. Disp_A and A_Vuln were also examined in those patients with documented repetitive focal activity. Logistic regression was used to determine any association of the following variables with A_Vuln: age, systemic hypertension, left ventricular hypertrophy, left atrial size, left ventricular function, duration of PAF, documented atrial flutter/tachycardia and Disp_A. RESULTS: There were no significant differences between the groups with regard to clinical characteristics and echocardiographic data. AF was inducible in 71% of the patients and noninducible in 29%. Group A had greater Disp_A compared to group B (105+/-78 ms vs. 49+/-20 ms; p=0.01). Disp_A was >40 ms in 50% of the patients without A_Vuln and in 91% of those with A_Vuln (p=0.05). Focal activity was demonstrated in 14 cases (39%), 57% of them with A_Vuln. Disp_A was 56+/-23 ms in this group and 92+/-78 ms in the others (p=0.07). Using logistic regression, the only predictor of A_Vuln was Disp_A (p=0.05). CONCLUSION: In patients with paroxysmal AF, Disp_A is a major determinant of A_Vuln. Nevertheless, the degree of nonuniformity of AERP appears to be less important as an electrophysiological substrate for AF due to focal activation

Why should we screen for perinatal depression? Ten reasons to do it

In this paper we review some of the best available evidence to argue that screening for perinatal depression should be systematically conducted since pregnancy. Our view is organized in ten topics: (1) perinatal depression high prevalence; (2) its potential negative consequences, including maternal, conjugal, foetal, infantile, and child effects; (3) its under-detection and treatment; (4) its stigma; (5) the professionals and women misconceptions related to perinatal depression; (6) the availability of valid and short self-report screening instruments for perinatal depression and (7) their acceptability; (8) the increase in recognition, diagnosis, and treatment rates in comparison with routine practice; (9) the opportunity, given the large number of contacts that women have with health professionals in the perinatal period; and (10) perinatal depression screening potential cost-effectiveness

Perfeccionismo no transtorno obsessivo-compulsivo e nos transtornos alimentares

OBJETIVO: Este estudo tem dois objetivos principais. Primeiro, avaliar as dimensões do perfeccionismo no transtorno obsessivo-compulsivo e nos transtornos alimentares em comparação com duas amostras controle: psiquiátrica (depressão/ansiedade) e não clínica. Segundo, avaliar se o perfeccionismo é um traço de personalidade especificamente relacionado com estas diferentes condições clínicas. MÉTODO: 39 pacientes com transtorno obsessivo-compulsivo, 24 com transtornos alimentares, 65 com um diagnóstico de depressão e/ou ansiedade (todos estes pacientes encontravam-se em regime de ambulatório) e 70 controles não clínicos completaram a versão portuguesa da Multidimensional Perfectionism Scale. RESULTADOS: Comparativamente à amostra não clínica, todas as amostras clínicas apresentaram níveis significativamente mais elevados na Multidimensional Perfectionism Scale total, no Perfeccionismo Auto-Orientado e no Perfeccionismo-Socialmente-Prescrito. Não houve diferenças estatisticamente significativas no Perfeccionismo-Auto-Orientado e na Multidimensional Perfectionism Scale total nas três amostras clínicas. No entanto, a amostra com transtornos alimentares apresentou níveis significativamente mais elevados de Perfeccionismo-Socialmente-Prescrito, comparativamente à transtornos alimentares e à amostra psiquiátrica (depressão/ansiedade). CONCLUSÃO: O perfeccionismo revelou estar associado a uma grande variedade de condições psicopatológicas. Contudo, as diferenças encontradas entre a amostra de transtornos alimentares, de transtorno obsessivo-compulsivo e a psiquiátrica no Perfeccionismo-Socialmente-Prescrito necessitam de investigação subsequente no sentido de clarificar a especificidade desta dimensão com os transtornos alimentares

Mechanical study of PLA-PCL fibers during in vitro degradation

The aliphatic polyesters are widely used in biomedical applications since they are susceptible to hydrolytic and/or enzymatic chain cleavage, leading to alpha-hydroxyacids, generally metabolized in the human body. This is particularly useful for many biomedical applications, especially, for temporary mechanical supports in regenerative medical devices. Ideally, the degradation should be compatible with the tissue recovering. In this work, the evolution of mechanical properties during degradation is discussed based on experimental data. The decrease of tensile strength of PLA-PCL fibers follows the same trend as the decrease of molecular weight, and so it can also be modeled using a first order equation. For each degradation stage, hyperelastic models such as Neo-Hookean, Mooney-Rivlin and second reduced order, allow a reasonable approximation of the material behavior. Based on this knowledge, constitutive models that describe the mechanical behavior during degradation are proposed and experimentally validated. The proposed theoretical models and methods may be adapted and used in other biodegradable materials, and can be considered fundamental tools in the design of regenerative medical devices where strain energy is an important requirement, such as, for example, ligaments, cartilage and stents

Ureasil organic-inorganic hybrids as photoactive waveguides for conjugated polyelectrolyte luminescent solar concentrators

We test the potential of resonance energy transfer to enhance the performance of conjugated copolyelectrolyte donor–acceptor luminescent solar concentrators immobilised within a photoactive organic–inorganic ureasil waveguide.</p