Constraints on the environment and energetics of the Broad-Line Ic SN2014ad from deep radio and X-ray observations

Broad-line type Ic Supernovae (BL-Ic SNe) are characterized by high ejecta velocity ($\gtrsim 10^4$ km s$^{-1}$) and are sometimes associated with the relativistic jets typical of long duration ($\gtrsim 2$ s) Gamma-Ray Bursts (L-GRBs). The reason why a small fraction of BL-Ic SNe harbor relativistic jets is not known. Here we present deep X-ray and radio observations of the BL-Ic SN2014ad extending from $13$ to $930$ days post explosion. SN2014ad was not detected at either frequency and has no observational evidence of a GRB counterpart. The proximity of SN2014ad ($d\sim 26$ Mpc) enables very deep constraints on the progenitor mass-loss rate $\dot{M}$ and on the total energy of the fast ejecta $E$. We consider two synchrotron emission scenarios for a wind-like circumstellar medium (CSM): (i) uncollimated non-relativistic ejecta, and (ii) off-axis relativistic jet. Within the first scenario our observations are consistent with GRB-less BL-Ic SNe characterized by a modest energy budget of their fast ejecta ($E \lesssim 10^{45}$ erg), like SNe 2002ap and 2010ay. For jetted explosions, we cannot rule out a GRB with $E \lesssim 10^{51}$ erg (beam-corrected) with a narrow opening angle ($\theta_j \sim 5^{\circ}$) observed moderately off-axis ($\theta_{\rm obs} \gtrsim 30^{\circ}$) and expanding in a very low CSM density ($\dot{M}$ $\lesssim 10^{-6}$ M$_{\odot}$ yr$^{-1}$). Our study shows that off-axis low-energy jets expanding in a low-density medium cannot be ruled out even in the most nearby BL-Ic SNe with extensive deep observations, and might be a common feature of BL-Ic SNe.Comment: 9 pages, 5 figures, accepted in Ap

Long-term moderate caloric restriction and social isolation synergize to induce anorexia-like behavior in rats

Moderate caloric restriction (CR) is an effective strategy to delay the onset of chronic disease states. Conversely, social isolation (SI) carries an increased risk of morbidity and mortality from several causes. The present studies were designed to investigate the long-term effect of the two combined exposures. Two-month-old male rats of the Fischer 344 strain were fed either ad libitum or under a regimen of CR, and each of the two animal sets were housed either in group or isolation. Food consumption and animal growth curves were as expected during the first 6 wk of observation. However, starting at 2 mo and continuing until the fifth month of follow up, rats exposed to both CR and SI showed signs of altered feeding behavior and were unable to complete their (already restricted) meal. Furthermore, altered behavior was accompanied by a corresponding decrease in growth rate until no further increase in body weight was observed. Restoration of group-housing conditions led to a reversal of this phenotype. We conclude that chronic moderate CR and SI synergize to induce anorexia-like behavior, representing a simple and reproducible model to study such an eating disorder

Analysis of Friction Stir Processed Surface Quality of AA2098 Aluminum Alloy for Aeronautical Applications

FSP is a relatively new technique that changes the microstructure on the surface of the material to improve mechanical properties in the desired zone. This study aimed to investigate the surface quality of AA2098 sheets after being subjected to friction stir processing under different conditions of feed rate and rotational speed. A DoE analysis was developed with two factors, feed rate and rotational speed, and three different levels of 75, 100, 125 mm/min and 1000, 1250, 1500 rpm respectively, in order to assess the processed surface quality. The Sa parameter was used to represent the surface quality in different zones of the process, near entrance tool, middle and near exit tool, and ANOVA analysis was conducted. The results indicated that only the position and feed rate have a statistical influence on surface roughness. Additionally, the surface quality is strongly affected by the position relative to the entrance of the tool and the side (retreating or advancing sides). The roughness was found to be significantly lower on the advancing side rather than on the retreating side

The biology and treatment of acute long-bones diaphyseal fractures: Overview of the current options for bone healing enhancement

Diaphyseal fractures represent a complex biological entity that could often end into impaired bone-healing, with delayed union and non-union occurring up to 10% of cases. The role of the modern orthopaedic surgeon is to optimize the fracture healing environment, recognize and eliminate possible interfering factors, and choose the best suited surgical fixation technique. The impaired reparative process after surgical intervention can be modulated with different surgical techniques, such as dynamization or exchange nailing after failed intramedullary nailing. Moreover, the mechanical stability of a nail can be improved through augmentation plating, bone grafting or external fixation techniques with satisfactory results. According to the “diamond concept”, local therapies, such as osteoconductive scaffolds, bone growth factors, and osteogenic cells can be successfully applied in “polytherapy” for the enhancement of delayed union and non-union of long bones diaphyseal fractures. Moreover, systemic anti-osteoporosis anabolic drugs, such as teriparatide, have been proposed as off-label treatment for bone healing enhancement both in fresh complex shaft fractures and impaired unions, especially for fragility fractures. The article aims to review the biological and mechanical principles of failed reparative osteogenesis of diaphyseal fractures after surgical treatment. Moreover, the evidence about the modern non-surgical and pharmacological options for bone healing enhancement will discussed

Bringing the Embedded Systems Industry Towards Open Source: the SHARE project experience

International audienceOpen source software adoption in the embedded systems domain is gaining growing interest within the european industrial and academic communities due to the significant benefits it brings in terms of flexibility and cost reduction.Nonetheless, scepticism about open source as a viable option to support critical business functions still holds, since its decentralized and distributed development model makes quality evaluation and assessment hard to achieve. This paper reports the SHARE project experience, aimed at facilitating and promoting the use of open source software in the embedded systems industry. Performed activities, proposed methodology and achieved results are presented, along with lessons learned to exploit for enabling further initiatives in the next future

Time-restricted feeding delays the emergence of the age-associated, neoplastic-prone tissue landscape

Aging increases the risk of cancer partly through alterations in the tissue microenvironment. Time-restricted feeding (TRF) is being proposed as an effective strategy to delay biological aging. In the present studies, we assessed the effect of long-term exposure to TRF on the emergence of the age-associated, neoplastic-prone tissue landscape. Animals were exposed to either ad libitum feeding (ALF) or TRF for 18 months and then transplanted with hepatocytes isolated from pre-neoplastic nodules. Both groups were continued ALF and the growth of transplanted cells was evaluated 3 months later. A significant decrease in frequency of larger size clusters of pre-neoplastic hepatocytes was seen in TRF-exposed group compared to controls. Furthermore, TRF modified several parameters related to both liver and systemic aging towards the persistence of a younger phenotype, including a decrease in liver cell senescence, diminished fat accumulation and up-regulation of SIRT1 in the liver, down-regulation of plasma IGF-1, decreased levels of plasma lipoproteins and up-regulation of hippocampal brain-derived growth factor (BDNF).These results indicate that TRF was able to delay the onset of the neoplastic-prone tissue landscape typical of aging. To our knowledge, this is the first investigation to describe a direct beneficial effect of TRF on early phases of carcinogenesis

Complications and Intraoperative Fractures in Reverse Shoulder Arthroplasty: A Systematic Review

Introduction: The reverse shoulder arthroplasty is nowadays a treatment option for a variety of shoulder problems. As its incidence rose, also the number of complications increased, including intraoperative fractures. Significance: We performed a systematic review and critical analysis of the current literature following the PRISMA guidelines. Our purpose was to: 1) determine incidence, causes, and characteristics of intraoperative fractures; 2) evaluate their current treatment options, possible related complications, reoperation rates, and the patients’ outcome; and 3) determine the overall incidence of each complication related to reverse shoulder arthroplasty. The articles were selected from PubMed medical database in April 2020 using a comprehensive search strategy. Rayyan software was used to support the selection process of the records. A descriptive and critical analysis of the results was performed. Results: The study group included a total of 13,513 reverse shoulder arthroplasty procedures. The total number of complications was 1647 (rate 12.1%). The most common complication was dislocation (340 cases, rate 2.5%). Forty-six studies reported a total of 188 intraoperative fractures among the complications (rate 1.4%). The intraoperative fracture rate was 2.9% and 13.6% in primary and revision settings, respectively. There were 136 humeral fractures, 60% of them occurred in revision RSAs, during the removal of the previous implant, and involved the shaft in the majority of cases (39%). Glenoid fractures were 51 and occurred mostly during the reaming of the glenoid. We observed 7 further related complications (rate of 4%) and 3 reoperations (rate of 1.5%). The outcome was satisfactory in the majority of cases. Conclusions: A comprehensive review on intraoperative fractures in reverse shoulder arthroplasties is presented. Results suggest favorable outcomes for all treatment methods, with a modest further complication rate. This investigation may aid in the treatment decision-making for these complications

Clearance of senescent hepatocytes in a neoplastic-prone microenvironment delays the emergence of hepatocellular carcinoma

Increasing evidence indicates that carcinogenesis is dependent on the tissue context in which it occurs, implying that the latter can be a target for preventive or therapeutic strategies. We tested the possibility that re-normalizing a senescent, neoplastic-prone tissue microenvironment would exert a modulatory effect on the emergence of neoplastic disease. Rats were exposed to a protocol for the induction of hepatocellular carcinoma (HCC). Using an orthotopic and syngeneic system for cell transplantation, one group of animal was then delivered 8 million normal hepatocytes, via the portal circulation. Hepatocytes transplantation resulted in a prominent decrease in the incidence of both pre-neoplastic and neoplastic lesions. At the end of 1 year 50% of control animals presented with HCC, while no HCC were observed in the transplanted group. Extensive hepatocyte senescence was induced by the carcinogenic protocol in the host liver; however, senescent cells were largely cleared following infusion of normal hepatocytes. Furthermore, levels of Il-6 increased in rats exposed to the carcinogenic protocol, while they returned to near control values in the group receiving hepatocyte transplantation. These results support the concept that strategies aimed at normalizing a neoplastic-prone tissue landscape can modulate progression of neoplastic disease

Design of an X-band constant impedance LINAC for compact light project

Within the framework of Horizon 2020 project, Compact Light, in order to provide a high performance, high-gradient X-band technology, for the new generation of hard X-ray FEL, a travelling wave (TW) Linac, working on 2pi/3 mode at 11.9952 GHz, fed by two types of asymmetrically couplers, has been designed. The design was performed using CST Microwave Studio frequency domain solver. First, simulations have been conduct in order to obtain the best trade-off between single cell’s parameters, varying iris aperture. Then, the both couplers, with and without pumping port, has been tuned to avoid reflections at the input port. Finally, the entire structure, with 5 cells, was simulated. The main structure parameters will be present and we will also show and discuss the acceleranting gradient obtained vary with linac lenght and input power

Correlated electron-hole plasma in organometal perovskites

Organic-inorganic perovskites are a class of solution-processed semiconductors holding promise for the realization of low-cost efficient solar cells and on-chip lasers. Despite the recent attention they have attracted, fundamental aspects of the photophysics underlying device operation still remain elusive. Here we use photoluminescence and transmission spectroscopy to show that photoexcitations give rise to a conducting plasma of unbound but Coulomb-correlated electron-hole pairs at all excitations of interest for light-energy conversion and stimulated optical amplification. The conductive nature of the photoexcited plasma has crucial consequences for perovskite-based devices: in solar cells, it ensures efficient charge separation and ambipolar transport while, concerning lasing, it provides a low threshold for light amplification and justifies a favourable outlook for the demonstration of an electrically driven laser. We find a significant trap density, whose cross-section for carrier capture is however low, yielding a minor impact on device performance