3,067 research outputs found
Land evaluation for a forestry route system on the Falterona and Tufone Mountains (Tuscany-Italy)
Diffraction dissociation in proton-proton collisions at = 0.9 TeV, 2.76 TeV and 7 TeV with ALICE at the LHC
The relative rates of single- and double- diffractive processes were measured
with the ALICE detector by studying properties of gaps in the pseudorapidity
distribution of particles produced in proton-proton collisions at =
0.9 TeV, 2.76 TeV and 7 TeV. ALICE triggering efficiencies are determined for
various classes of events, using a detector simulation validated with data on
inclusive particle production. Cross-sections are determined using van der Meer
scans to measure beam properties and obtain a measurement of the luminosity
The role of deformation bands in dictating poromechanical properties of unconsolidated sand and sandstone
Cataclastic shear bands in sands and sandstones are typically stronger, stiffer, and exhibit lower permeability than the surrounding matrix, and therefore act as barriers to fluid flow. Previous work has quantified the reduction in permeability associated with these features; however, little is known about the role of shear band structure in controlling the way they impact permeability and elastic properties. Here, we report on a suite of laboratory measurements designed to measure the poromechanical properties for host material and natural shear bands, over effective stresses from 1–65 MPa. In order to investigate the role of host material properties in controlling poromechanical evolution with stress, we sampled shear bands from two well-studied sandstones representing structurally distinct end-members: a poorly cemented marine terrace sand from the footwall of the McKinleyville thrust fault in Humboldt County, California, and a strongly-cemented sandstone from the hanging wall of the Moab Fault in Moab, Utah. The permeability-porosity trends are similar for all samples, with permeability decreasing systematically with increasing effective stress and decreasing porosity. The permeability of the host material is consistently >1 order of magnitude greater than the shear bands for both localities. For the unconsolidated case, shear bands are less permeable and stiffer than the host material, whereas for the consolidated case, shear bands are slightly less permeable, and wave speeds are slower than in the host. We attribute the differences between the McKinleyville and Moab examples to changes in structure of the nearby host material that accompanied formation of the shear band
Frictional state evolution during normal stress perturbations probed with ultrasonic waves
Fault normal stress changes dynamically during earthquake rupture; however, the impact of these changes on dynamic frictional strength is poorly understood. Here we report on a laboratory study to investigate the effect of normal stress perturbations on the friction of westerly granite surfaces sheared under normal stresses of 1-25 MPa. We measure changes in surface friction and elastic properties, using acoustic waves, for step changes in normal stress of 1–50% and shearing velocities of 1-100 μm/s. We demonstrate that transmitted elastic wave amplitude is a reliable proxy for the real contact area at the fault interface at steady state. For step increases in normal stress, wave amplitude increases immediately and then continues to increase during elastic shear loading to a peak value from which it decreases as fault slip rate increases. Friction changes in a similar fashion, showing an inelastic increase over a characteristic shear displacement that is independent of loading rate. Perturbations in normal stress during shear cause excursions in the frictional slip rate that must be accounted for in order to accurately predict the evolution of fault strength and elastic properties. Our work improves understanding of induced seismicity and triggered earthquakes with particular focus on simulating static triggering and stress transfer phenomena using rate-and-state frictional formulations in earthquake rupture models
Permeability evolution in sorbing media. Analogies between organic-rich shale and coal
Shale gas reservoirs like coalbed methane (CBM) reservoirs are promising targets for geological sequestration of carbon dioxide (CO2). However, the evolution of permeability in shale reservoirs on injection of CO2 is poorly understood unlike CBM reservoirs. In this study, we report measurements of permeability evolution in shales infiltrated separately by nonsorbing (He) and sorbing (CO2) gases under varying gas pressures and confining stresses. Experiments are completed on Pennsylvanian shales containing both natural and artificial fractures under nonpropped and propped conditions. We use the models for permeability evolution in coal (Journal of Petroleum Science and Engineering, Under Revision) to codify the permeability evolution observed in the shale samples. It is observed that for a naturally fractured shale, the He permeability increases by approximately 15% as effective stress is reduced by increasing the gas pressure from 1 MPa to 6 MPa at constant confining stress of 10 MPa. Conversely, the CO2 permeability reduces by a factor of two under similar conditions. A second core is split with a fine saw to create a smooth artificial fracture and the permeabilities are measured for both nonpropped and propped fractures. The He permeability of a propped artificial fracture is approximately 2- to 3fold that of the nonpropped fracture. The He permeability increases with gas pressure under constant confining stress for both nonpropped and propped cases. However, the CO2 permeability of the propped fracture decreases by between one-half to one-third as the gas pressure increases from 1 to 4 MPa at constant confining stress. Interestingly, the CO2 permeability of nonpropped fracture increases with gas pressure at constant confining stress. The permeability evolution of nonpropped and propped artificial fractures in shale is found to be similar to those observed in coals but the extent of permeability reduction by swelling is much lower in shale due to its lower organic content. Optical profilometry is used to quantify the surface roughness. The changes in surface roughness indicate significant influence of proppant indentation on fracture surface in the shale sample. The trends of permeability evolution on injection of CO2 in coals and shales are found analogous; therefore, the permeability evolution models previously developed for coals are adopted to explain the permeability evolution in shales
Artichoke biorefinery: From food to advanced technological applications
A sequential extraction process has been designed for valorizing globe artichoke plant residues and waste (heads, leaves, stalks, and roots left in the field) by means of green extraction techniques according to a biorefinery approach. We investigated two cascading extractions based on microwave-assisted extractions (MAE) and green solvents (water and ethanol) that have been optimized for varying temperature, solvent and extraction time. In the first step, phenols were extracted with yields that ranged between 6.94 mg g−1 dw (in leaves) and 3.28 mg g−1 dw (in roots), and a phenols productivity of 175.74 kg Ha−1. In the second step, inulin was extracted with impressive yields (42% dw), higher than other conventional inulin sources, corresponding to an inulin productivity of 4883.58 kg Ha−1. The remaining residues were found to be valuable feedstocks both for bioenergy production and green manure (back to the field), closing the loop according to the Circular Economy paradigm
Using a physics-informed neural network and fault zone acoustic monitoring to predict lab earthquakes
Predicting failure in solids has broad applications including earthquake prediction which remains an unattainable goal. However, recent machine learning work shows that laboratory earthquakes can be predicted using micro-failure events and temporal evolution of fault zone elastic properties. Remarkably, these results come from purely data-driven models trained with large datasets. Such data are equivalent to centuries of fault motion rendering application to tectonic faulting unclear. In addition, the underlying physics of such predictions is poorly understood. Here, we address scalability using a novel Physics-Informed Neural Network (PINN). Our model encodes fault physics in the deep learning loss function using time-lapse ultrasonic data. PINN models outperform data-driven models and significantly improve transfer learning for small training datasets and conditions outside those used in training. Our work suggests that PINN offers a promising path for machine learning-based failure prediction and, ultimately for improving our understanding of earthquake physics and prediction
Three cases of mcr-1-positive colistin-resistant Escherichia coli bloodstream infections in Italy, August 2016 to January 2017
We describe three cases of bloodstream infection caused by colistin-resistant Escherichia coli in patients in a tertiary hospital in Italy, between August 2016 and January 2017. Whole genome sequencing detected the mcr-1 gene in three isolated strains belonging to different sequence types (STs). This occurrence of three cases with mcr-1-positive E. coli belonging to different STs in six months suggests a widespread problem in settings where high multidrug resistance is endemic such as in Italy
Imaging elastodynamic and hydraulic properties of in situ fractured rock. An experimental investigation exploring effects of dynamic stressing and shearing
We describe laboratory experiments to elucidate the relationship between nonlinear elasticity and permeability evolution in fractured media subjected to local stress perturbations. This study is part of an effort to measure fluid pathways and fracture properties using active-source acoustic monitoring during fluid injection and shear of rough fractures. Experiments were conducted with L-shaped samples of Westerly granite fractured in situ under triaxial conditions with deionized water subsequently circulated through the resulting fractures. After in situ fracturing, we separately imposed oscillations of the applied normal stress and pore pressure with amplitudes ranging from 0.2 to 1 MPa and frequencies from 0.1 to 40 Hz. In response to normal stress and pore pressure oscillations, fractured Westerly granite samples exhibit characteristic transient softening, acoustic velocity fluctuations, and slow recovery, together with permeability enhancement or decay, informing us about the coupled nonlinear elastodynamic and poromechanical rock properties. Fracture interface properties (contact asperity stiffness, aperture) are then altered in situ by shearing, which generally decreases the measured elastic nonlinearity and permeability change for both normal stress and pore pressure oscillations
A tilted grating interferometer for full vector field differential x-ray phase contrast tomography
We report on a setup for differential x-ray phase-contrast imaging and tomography, that measures the full 2D phase-gradient information. The setup uses a simple one-dimensional x-ray grating interferometer, in which the grating structures of the interferometer are oriented at a tilt angle with respect to the sample rotation axis. In such a configuration, the differential phase images from opposing tomography projections can be combined to yield both components of the gradient vector. We show how the refractive index distribution as well as its x, y, and z gradient components can be reconstructed directly from the recorded projection data. The method can equally well be applied at conventional x-ray tube sources, to analyzer based x-ray imaging or neutron imaging. It is demonstrated with measurements of an x-ray phantom and a rat brain using synchrotron radiation
- …