Life history and carbon economic trade-offs adapting an annual plant across a climate gradient

Understanding the mechanisms behind adaptation to different climates is key to understanding the prevalent phenomenon of local adaptation in plants. Variation among sites in seasonal patterns of temperature and precipitation is thought to select functional strategies that work locally but not range-wide. These strategies tend to involve the concerted evolution of suites of traits including life history, acquisition and allocation resources. I studied adaptive differentiation due to climate in Arabidopsis thaliana. I examine natural genetic variation in this genome-sequenced species, because it provides insight into the functional ecology of annual plants generally, while providing context for future research on adaptation genetics. I investigated plants collected along an altitudinal gradient where hot, dry low contrasts cold, wet high elevation climates. Heating and drying in a growth chamber during reproduction favored plants from low elevations where conditions are most similar to the experiment. I found that stress avoidance traits like earlier flowering and faster fruit ripening were advantageous in this setting. Subsequently, I focused on how variation in the lifespan-dependent balance between carbon income and investment adapt plants across the climate gradient. Leaves generally fall along a continuum between short lives with rapid photosynthesis and long lives with slow photosynthesis, a pattern known as the worldwide leaf economic spectrum. Under seasonal hot, dry growth chamber conditions simulating low elevation climate, I demonstrated for the first time natural variation in an economic spectrum at the rosette level. Low elevation plants had short-lived economies compared to plants from colder, wetter locations. I then considered the whole plant including photosynthetic inflorescences, which were previously ignored. I discovered that earlier flowering led to a majority of the whole plant economy depending on the contribution of the inflorescence. Plants as a whole exhibited the same trade-offs observed at lower levels of organization, with inflorescence-centric life adapting plants for avoidance of spring stress. My work supports the general hypothesis that avoidance of stress at low elevation, which requires a fast life, is traded off with a strategy of delay and tolerance associated with winter in high altitude populations, leading to local adaptation

Multi-Species Genomics-Enabled Selection for Improving Agroecosystems Across Space and Time

Plant breeding has been central to global increases in crop yields. Breeding deserves praise for helping to establish better food security, but also shares the responsibility of unintended consequences. Much work has been done describing alternative agricultural systems that seek to alleviate these externalities, however, breeding methods and breeding programs have largely not focused on these systems. Here we explore breeding and selection strategies that better align with these more diverse spatial and temporal agricultural systems

Genome-Wide Association Mapping of Correlated Traits in Cassava: Dry Matter and Total Carotenoid Content

Article purchased; Published online: 3 August 2017Cassava (Manihot esculenta (L.) Crantz) is a starchy root crop cultivated in the tropics for fresh consumption and commercial processing. Dry matter content and micronutrient density, particularly of provitamin A, traits that are negatively correlated, are among the primary selection objectives in cassava breeding. This study aimed at identifying genetic markers associated with these traits and uncovering the potential underlying cause of their negative correlation - whether linkage and/or pleiotropy. A genome-wide association mapping using 672 clones genotyped at 72,279 SNP loci was carried out. Root yellowness was used indirectly to assess variation in carotenoid content. Two major loci for root yellowness was identified on chromosome 1 at positions 24.1 and 30.5 Mbp. A single locus for dry matter content that co-located with the 24.1 Mbp peak for carotenoid content was identified. Haplotypes at these loci explained a large proportion of the phenotypic variability. Evidence of mega-base-scale linkage disequilibrium around the major loci of the two traits and detection of the major dry matter locus in independent analysis for the white- and yellow-root subpopulations suggests that physical linkage rather that pleiotropy is more likely to be the cause of the negative correlation between the target traits. Moreover, candidate genes for carotenoid (phytoene synthase) and starch biosynthesis (UDP-glucose pyrophosphorylase and sucrose synthase) occurred in the vicinity of the identified locus at 24.1 Mbp. These findings elucidate on the genetic architecture of carotenoids and dry matter in cassava and provides an opportunity to accelerate genetic improvement of these traits

Prospects for Genomic Selection in Cassava Breeding

Article purchased; Published online: 28 Sept 2017Cassava (Manihot esculenta Crantz) is a clonally propagated staple food crop in the tropics. Genomic selection (GS) has been implemented at three breeding institutions in Africa to reduce cycle times. Initial studies provided promising estimates of predictive abilities. Here, we expand on previous analyses by assessing the accuracy of seven prediction models for seven traits in three prediction scenarios: cross-validation within populations, cross-population prediction and cross-generation prediction. We also evaluated the impact of increasing the training population (TP) size by phenotyping progenies selected either at random or with a genetic algorithm. Cross-validation results were mostly consistent across programs, with nonadditive models predicting of 10% better on average. Cross-population accuracy was generally low (mean = 0.18) but prediction of cassava mosaic disease increased up to 57% in one Nigerian population when data from another related population were combined. Accuracy across generations was poorer than within-generation accuracy, as expected, but accuracy for dry matter content and mosaic disease severity should be sufficient for rapid-cycling GS. Selection of a prediction model made some difference across generations, but increasing TP size was more important. With a genetic algorithm, selection of one-third of progeny could achieve an accuracy equivalent to phenotyping all progeny. We are in the early stages of GS for this crop but the results are promising for some traits. General guidelines that are emerging are that TPs need to continue to grow but phenotyping can be done on a cleverly selected subset of individuals, reducing the overall phenotyping burden

Increasing cassava root yield: Additive-dominant genetic models for selection of parents and clones

Genomic selection has been promising in situations where phenotypic assessments are expensive, laborious, and/or inefficient. This work evaluated the efficiency of genomic prediction methods combined with genetic models in clone and parent selection with the goal of increasing fresh root yield, dry root yield, as well as dry matter content in cassava roots. The bias and predictive ability of the combinations of prediction methods Genomic Best Linear Unbiased Prediction (G-BLUP), Bayes B, Bayes Cπ, and Reproducing Kernel Hilbert Spaces with additive and additive-dominant genetic models were estimated. Fresh and dry root yield exhibited predominantly dominant heritability, while dry matter content exhibited predominantly additive heritability. The combination of prediction methods and genetic models did not show significant differences in the predictive ability for dry matter content. On the other hand, the prediction methods with additive-dominant genetic models had significantly higher predictive ability than the additive genetic models for fresh and dry root yield, allowing higher genetic gains in clone selection. However, higher predictive ability for genotypic values did not result in differences in breeding value predictions between additive and additive-dominant genetic models. G-BLUP with the classical additive-dominant genetic model had the best predictive ability and bias estimates for fresh and dry root yield. For dry matter content, the highest predictive ability was obtained by G-BLUP with the additive genetic model. Dry matter content exhibited the highest heritability, predictive ability, and bias estimates compared with other traits. The prediction methods showed similar selection gains with approximately 67% of the phenotypic selection gain. By shortening the breeding cycle time by 40%, genomic selection may overcome phenotypic selection by 10%, 13%, and 18% for fresh root yield, dry root yield, and dry matter content, respectively, with a selection proportion of 15%. The most suitable genetic model for each trait allows for genomic selection optimization in cassava with high selection gains, thereby accelerating the release of new varieties

Climate change challenges, plant science solutions

Climate change is a defining challenge of the 21st century, and this decade is a critical time for action to mitigate the worst effects on human populations and ecosystems. Plant science can play an important role in developing crops with enhanced resilience to harsh conditions (e.g. heat, drought, salt stress, flooding, disease outbreaks) and engineering efficient carbon-capturing and carbon-sequestering plants. Here, we present examples of research being conducted in these areas and discuss challenges and open questions as a call to action for the plant science community

Training Population Optimization for Prediction of Cassava Brown Streak Disease Resistance in West African Clones

Cassava production in the central, southern and eastern parts of Africa is under threat by cassava brown streak virus (CBSV). Yield losses of up to 100% occur in cases of severe infections of edible roots. Easy illegal movement of planting materials across African countries, and long-range movement of the virus vector (Bemisia tabaci) may facilitate spread of CBSV to West Africa. Thus, effort to pre-emptively breed for CBSD resistance in W. Africa is critical. Genomic selection (GS) has become the main approach for cassava breeding, as costs of genotyping per sample have declined. Using phenotypic and genotypic data (genotyping-by-sequencing), followed by imputation to whole genome sequence (WGS) for 922 clones from National Crops Resources Research Institute, Namulonge, Uganda as a training population (TP), we predicted CBSD symptoms for 35 genotyped W. African clones, evaluated in Uganda. The highest prediction accuracy (r = 0.44) was observed for cassava brown streak disease severity scored at three months (CBSD3s) in the W. African clones using WGS-imputed markers. Optimized TPs gave higher prediction accuracies for CBSD3s and CBSD6s than random TPs of the same size. Inclusion of CBSD QTL chromosome markers as kernels, increased prediction accuracies for CBSD3s and CBSD6s. Similarly, WGS imputation of markers increased prediction accuracies for CBSD3s and for cassava brown streak disease root severity (CBSDRs), but not for CBSD6s. Based on these results we recommend TP optimization, inclusion of CBSD QTL markers in genomic prediction models, and the use of high-density (WGS-imputed) markers for CBSD predictions across population

Plant Breeding for Intercropping in Temperate Field Crop Systems: A Review

Monoculture cropping systems currently dominate temperate agroecosystems. However, intercropping can provide valuable benefits, including greater yield stability, increased total productivity, and resilience in the face of pest and disease outbreaks. Plant breeding efforts in temperate field crops are largely focused on monoculture production, but as intercropping becomes more widespread, there is a need for cultivars adapted to these cropping systems. Cultivar development for intercropping systems requires a systems approach, from the decision to breed for intercropping systems through the final stages of variety testing and release. Design of a breeding scheme should include information about species variation for performance in intercropping, presence of genotype × management interaction, observation of key traits conferring success in intercropping systems, and the specificity of intercropping performance. Together this information can help to identify an optimal selection scheme. Agronomic and ecological knowledge are critical in the design of selection schemes in cropping systems with greater complexity, and interaction with other researchers and key stakeholders inform breeding decisions throughout the process. This review explores the above considerations through three case studies: (1) forage mixtures, (2) perennial groundcover systems (PGC), and (3) soybean-pennycress intercropping. We provide an overview of each cropping system, identify relevant considerations for plant breeding efforts, describe previous breeding focused on the cropping system, examine the extent to which proposed theoretical approaches have been implemented in breeding programs, and identify areas for future development.This article is published as Moore VM, Schlautman B, Fei S-z, Roberts LM, Wolfe M, Ryan MR, Wells S and Lorenz AJ (2022) Plant Breeding for Intercropping in Temperate Field Crop Systems: A Review. Front. Plant Sci. 13:843065. doi: 10.3389/fpls.2022.843065. Posted with permission of INRC.This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms

Exploring genotype by environment interaction on cassava yield and yield related traits using classical statistical methods

Variety advancement decisions for root quality and yield-related traits in cassava are complex due to the variable patterns of genotype-by-environment interactions (GEI). Therefore, studies focused on the dissection of the existing patterns of GEI using linear-bilinear models such as Finlay-Wilkinson (FW), additive main effect and multiplicative interaction (AMMI), and genotype and genotype-by-environment (GGE) interaction models are critical in defining the target population of environments (TPEs) for future testing, selection, and advancement. This study assessed 36 elite cassava clones in 11 locations over three cropping seasons in the cassava breeding program of IITA based in Nigeria to quantify the GEI effects for root quality and yield-related traits. Genetic correlation coefficients and heritability estimates among environments found mostly intermediate to high values indicating high correlations with the major TPE. There was a differential clonal ranking among the environments indicating the existence of GEI as also revealed by the likelihood ratio test (LRT), which further confirmed the statistical model with the heterogeneity of error variances across the environments fit better. For all fitted models, we found the main effects of environment, genotype, and interaction significant for all observed traits except for dry matter content whose GEI sensitivity was marginally significant as found using the FW model. We identified TMS14F1297P0019 and TMEB419 as two topmost stable clones with a sensitivity values of 0.63 and 0.66 respectively using the FW model. However, GGE and AMMI stability value in conjunction with genotype selection index revealed that IITA-TMS-IBA000070 and TMS14F1036P0007 were the top-ranking clones combining both stability and yield performance measures. The AMMI-2 model clustered the testing environments into 6 mega-environments based on winning genotypes for fresh root yield. Alternatively, we identified 3 clusters of testing environments based on genotypic BLUPs derived from the random GEI component