The conformational evolution of elongated polymer solutions tailors the polarization of light-emission from organic nanofibers

Polymer fibers are currently exploited in tremendously important technologies. Their innovative properties are mainly determined by the behavior of the polymer macromolecules under the elongation induced by external mechanical or electrostatic forces, characterizing the fiber drawing process. Although enhanced physical properties were observed in polymer fibers produced under strong stretching conditions, studies of the process-induced nanoscale organization of the polymer molecules are not available, and most of fiber properties are still obtained on an empirical basis. Here we reveal the orientational properties of semiflexible polymers in electrospun nanofibers, which allow the polarization properties of active fibers to be finely controlled. Modeling and simulations of the conformational evolution of the polymer chains during electrostatic elongation of semidilute solutions demonstrate that the molecules stretch almost fully within less than 1 mm from jet start, increasing polymer axial orientation at the jet center. The nanoscale mapping of the local dichroism of individual fibers by polarized near-field optical microscopy unveils for the first time the presence of an internal spatial variation of the molecular order, namely the presence of a core with axially aligned molecules and a sheath with almost radially oriented molecules. These results allow important and specific fiber properties to be manipulated and tailored, as here demonstrated for the polarization of emitted light.Comment: 45 pages, 10 figures, Macromolecules (2014

Modal Coupling of Single Photon Emitters Within Nanofiber Waveguides

Nanoscale generation of individual photons in confined geometries is an exciting research field aiming at exploiting localized electromagnetic fields for light manipulation. One of the outstanding challenges of photonic systems combining emitters with nanostructured media is the selective channelling of photons emitted by embedded sources into specific optical modes and their transport at distant locations in integrated systems. Here, we show that soft-matter nanofibers, electrospun with embedded emitters, combine subwavelength field localization and large broadband near-field coupling with low propagation losses. By momentum spectroscopy, we quantify the modal coupling efficiency identifying the regime of single-mode coupling. These nanofibers do not rely on resonant interactions, making them ideal for room-temperature operation, and offer a scalable platform for future quantum information technology

Nanowire-Intensified MEF in Hybrid Polymer-Plasmonic Electrospun Filaments

Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics compared to conventional structures. The intensification effect when the particle is placed in the organic filaments is remarkably higher with respect to thin films of comparable thickness, thus highlighting a specific, nanowire-related enhancement of MEF effects. A dependence on the confinement volume in the dielectric nanowire is also evidenced, with MEF significantly increasing upon reducing the wire diameter. These findings are rationalized by finite element simulations, predicting a position-dependent enhancement of the quantum yield of fluorophores embedded in the fibers. Calculation of the ensemble-averaged fluorescence enhancement unveils the possibility of strongly enhancing the overall emission intensity for structures with size twice the diameter of the embedded metal particles. These new, hybrid fluorescent systems with localized enhanced emission, as well as the general Nanowire-Intensified MEF effect associated to them, are highly relevant for developing nanoscale light-emitting devices with high efficiency and inter-coupled through nanofiber networks, highly sensitive optical sensors, and novel laser architectures.Comment: 29 pages, 12 figures, Small (2018

Anisotropic conjugated polymer chain conformation tailors the energy migration in nanofibers

Conjugated polymers are complex multi-chromophore systems, with emission properties strongly dependent on the electronic energy transfer through active sub-units. Although the packing of the conjugated chains in the solid state is known to be a key factor to tailor the electronic energy transfer and the resulting optical properties, most of the current solution-based processing methods do not allow for effectively controlling the molecular order, thus making the full unveiling of energy transfer mechanisms very complex. Here we report on conjugated polymer fibers with tailored internal molecular order, leading to a significant enhancement of the emission quantum yield. Steady state and femtosecond time-resolved polarized spectroscopies evidence that excitation is directed toward those chromophores oriented along the fiber axis, on a typical timescale of picoseconds. These aligned and more extended chromophores, resulting from the high stretching rate and electric field applied during the fiber spinning process, lead to improved emission properties. Conjugated polymer fibers are relevant to develop optoelectronic plastic devices with enhanced and anisotropic properties.Comment: 43 pages, 15 figures, 1 table in Journal of the American Chemical Society, (2016

Nanoparticle-doped electrospun fiber random lasers with spatially extended light modes

Complex assemblies of light-emitting polymer nanofibers with molecular materials exhibiting optical gain can lead to important advance to amorphous photonics and to random laser science and devices. In disordered mats of nanofibers, multiple scattering and waveguiding might interplay to determine localization or spreading of optical modes as well as correlation effects. Here we study electrospun fibers embedding a lasing fluorene-carbazole-fluorene molecule and doped with titania nanoparticles, which exhibit random lasing with sub-nm spectral width and threshold of about 9 mJ cm^-2 for the absorbed excitation fluence. We focus on the spatial and spectral behavior of optical modes in the disordered and non-woven networks, finding evidence for the presence of modes with very large spatial extent, up to the 100 micrometer-scale. These findings suggest emission coupling into integrated nanofiber transmission channels as effective mechanism for enhancing spectral selectivity in random lasers and correlations of light modes in the complex and disordered material.Comment: 22 pages, 6 figure

Diverse regimes of mode intensity correlation in nanofiber random lasers through nanoparticle doping

Random lasers are based on disordered materials with optical gain. These devices can exhibit either intensity or resonant feedback, relying on diffusive or interference behaviour of light, respectively, which leads to either coupling or independent operation of lasing modes. We study for the first time these regimes in complex, solid-state nanostructured materials. The number of lasing modes and their intensity correlation features are found to be tailorable in random lasers made of light-emitting, electrospun polymer fibers upon nanoparticle doping. By material engineering, directional waveguiding along the length of fibers is found to be relevant to enhance mode correlation in both intensity feedback and resonant feedback random lasing. The here reported findings can be used to establish new design rules for tuning the emission of nano-lasers and correlation properties by means of the compositional and morphological properties of complex nanostructured materials.Comment: 30 pages, 10 figure

Bright light emission and waveguiding in conjugated polymer nanofibers electrospun from organic-salt added solutions

Light emitting electrospun nanofibers of poly-[(9,9-dioctylfluorenyl-2,7-diyl)-co-(N,N'-diphenyl)-N,N'-di(p-butyl-oxy-phenyl)-1,4-diaminobenzene)] (PFO-PBAB) are produced by electrospinning under different experimental conditions. In particular, uniform fibers with average diameter of 180 nm are obtained by adding an organic salt to the electrospinning solution. The spectroscopic investigation assesses that the presence of the organic salt does not alter the optical properties of the active material, therefore providing an alternative approach for the fabrication of highly emissive conjugated polymer nanofibers. The produced nanofibers display self-waveguiding of light, and polarized photoluminescence, which is especially promising for embedding active electrospun fibers in sensing and nanophotonic devices.Comment: 31 pages, 9 figures, 1 table. Macromolecules (2013

Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunnelling-AFM, Light-Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells

Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include ribbon-shape of the realized fibers, and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. This method might be applied to other electron donor-electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.Comment: 35 pages, 9 figure

Sub-ms dynamics of the instability onset of electrospinning

Electrospun polymer jets are imaged for the first time at an ultra-high rate of 10,000 frames per second, investigating the process dynamics, and the instability propagation velocity and displacement in space. The polymer concentration, applied voltage bias and needle-collector distance are systematically varied, and their influence on the instability propagation velocity and on the jet angular fluctuations analyzed. This allows us to unveil the instability formation and cycling behavior, and its exponential growth at the onset, exhibiting radial growth rates of the order of 10^3 s^-1. Allowing the conformation and evolution of polymeric solutions to be studied in depth, high-speed imaging at sub-ms scale shows a significant potential for improving the fundamental knowledge of electrified jets, leading to obtain finely controllable bending and solution stretching in electrospinning, and consequently better designed nanofibers morphologies and structures.Comment: 23 pages, 9 figure

Identification of two novel LDLR variants by Next Generation Sequencing

Introduction. Familial hypercholesterolemia (FH) is an autosomal dominant inherited disease characterized by elevated plasma low-density lipoprotein cholesterol (LDL-C). Targeted Next Generation Sequencing (NGS) is a new opportunity to expand the existing pathogenic variants (PVs) spectrum associated to FH. Our aim was to report a diagnostic NGS-based approach to detect variants associated to FH.Methods. We report two patients: a 48-year-old Asian woman, without known history of hypercholesterolemia and a 46-year-old Caucasian man, with childhood hypercholesterolemia.Results. An effective NGS-based pipeline, FH-Devyser kit/Amplicon Suite, beginning from sequencing to data analysis, did not identify known PVs in the LDLR, APOB, APOE, LDLRAP1, STAP1 and PCSK9 genes, but revealed two novel LDLR variants (c.1564A>T, p.Ile522Phe and c.1688C>T, p.Pro563Leu).Discussion and conclusions. This study showed that an effective NGS-based pipeline led to a definitive diagnosis in two FH families, allowing to plan their therapeutic treatment. Although the functional consequence of the two LDLR variants needs to be assessed in vitro, the in silico analysis and high preservation of the two amino acid positions observed in the LDLR protein, across different animal species, suggest that both variants are deleterious