Stabilizing sodium hypochlorite at high pH: effects on soft tissue and dentin

NaOH-stabilized NaOCl solutions have a higher alkaline capacity and are thus more proteolytic than standard counterparts

Scanning electron microscope appearances of Lightspeed instruments used clinically: a pilot study.

The cutting heads of the first 18 instruments in six sets of clinically used Lightspeed instruments (sizes 20-65) were examined in a scanning electron microscope (SEM). Three sets had been used by full-time faculty and discarded as follows: instrument sizes 20-32.5 after 18 treated root canals; instrument sizes 35-47.5 after 36 treated root canals; and instrument sizes 50-65 after 54 treated root canals. Three other sets had been used by a private clinician who discarded all Lightspeed instruments after preparing 20 root canals. The cutting heads of the 108 instruments were examined for the presence of surface debris, metal strips, metal flash, disrupted cutting edges, microfractures, tears, pitting and fretting and fatigue cracks. Fewer instruments ultrasonically cleaned before examination in the SEM had debris than those not cleaned before examination. The prevalence of metal strips and metal flash was similar for both groups. In contrast, microfractures and tears were more prevalent in instruments used by the full-time faculty group, who used their instruments more frequently before discarding them. Pitting and fretting occurred equally frequently in both groups whilst no fatigue cracks were noted in any of the 108 instruments. Overusage of Lightspeed instruments may predispose the flutes of the cutting heads to microfractures and clinicians should be aware of this possibility

Comparison of two contemporary rotary systems in a pre-clinical student course setting

AIM To assess two contemporary rotary instrumenting systems subjectively and objectively in a pre-clinical student course setting. METHODOLOGY Undergraduate dental students (n = 44) prepared mesiolingual canals of 3D-printed mandibular molar replicas (RepliDens, Zurich, Switzerland). The HyFlex and BioRace rotary systems, both previously unknown to the students, were used according to the manufacturers' guidelines after a short theoretical introduction. For comparison, a first-generation rotary system (ProFile .04), which the students knew from their previous education, was then used in a third RepliDens. Questionnaires were issued to note subjective experiences immediately after instrumentation. Objectively, time to instrument to size 40, .04 taper and shaping outcomes were analysed. Categorical data were compared using chi-square and Fisher's exact tests, numerical data according to goodness of fit to the normal distribution, P < 0.05. RESULTS Subjectively, the students liked the file size and sequence designation in the BioRace system significantly (P < 0.05) better than in the HyFlex counterpart, whilst they found better controllability with the HyFlex (P < 0.05), and reported no difference in cutting efficiency. They preferred both systems to the ProFile. Objectively, canal transportation was significantly less with the HyFlex (and the ProFile) systems compared to BioRace (P < 0.05). Both systems under investigation were statistically similar in terms of file fractures (nil), length control, and instrumentation time, which was considerably faster than with the ProFile control system. CONCLUSIONS HyFlex and BioRace had perceived and quantifiable strengths and weaknesses. Both systems were equally liked by the students and preferred over the ProFile first-generation rotary system

Mixed phase silicon oxide layers for thin film silicon solar cells

Lower absorption, lower refractive index and tunable resistance are three advantages of doped silicon oxide containing nanocrystalline silicon grains (nc-SiOx) compared to doped microcrystalline silicon, for the use as p- and n-type layers in thin-film silicon solar cells. In this study we show how optical, electrical and microstructural properties of nc-SiOx layers depend on precursor gas ratios and we propose a growth model to explain the phase separation in such films into Si-rich and O-rich regions as visualized by energy-filtered transmission electron microscopy. INTRODUCTIO

A comparative scanning electron microscopy evaluation of smear layer removal with apple vinegar and sodium hypochlorite associated with EDTA

OBJECTIVE: The purpose of this study was to evaluate by scanning electron microscopy (SEM) the removal of smear layer from the middle and apical root thirds after use of different irrigating solutions. MATERIAL AND METHODS: Forty roots of permanent human teeth had their canals instrumented and were randomly assigned to 4 groups (n=10), according to the irrigating solution: apple vinegar (group A), apple vinegar finished with 17% ethylenediaminetetraacetic acid (EDTA) (group B), 1% sodium hypochlorite (NaOCl) finished with 17% EDTA (group C) and saline (group D - control). After chemomechanical preparation, the roots were cleaved longitudinally and their middle and apical thirds were examined by SEM at ×1,000 magnification. Two calibrated examiners (kappa=0.92) analyzed the SEM micrographs qualitatively attributing scores that indicated the efficacy of the solutions in removing the smear layer from the surface of the dentin tubules (1 - poor, 2 - good and 3 - excellent). Data from the control and experimental groups were analyzed by the Kruskal-Wallis and Dunn's test, while the Wilcoxon test was used to compare the middle and apical thirds of the canals within the same group (a=0.05). RESULTS: The middle third presented less amount of smear layer than the apical third, regardless of the irrigant. There was statistically significant difference (p=0.0402) among the groups in the middle third. In the apical third, the apple vinegar/EDTA group showed the greatest removal of smear layer (p=0.0373). CONCLUSION: Apple vinegar associated or not with EDTA was effective in removing smear layer when used as an endodontic irrigant