120 research outputs found
Reconfigurable photonic logic architecture
The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals
A aplicação de tecnologias digitais e a fundição por modelo de cera perdido na realização da escultura
A realidade que hoje vivemos transporta-nos, incondicionalmente, para o mundodas tecnologias, da informação e da comunicação. As práticas ancestrais de fundiçãopor modelo de cera perdido continuam o seu percurso evolutivo com novos materiais,novos equipamentos e novas tecnologias, mas o processo permanece praticamenteinvariável. A escultura no bronze tem marcado ao longo dos tempos uma forte presençagraças à fundição dos metais. Henry Moore, acerca da estátua equestre, em bronze, deMarco Aurélio, em Roma, que o fascinava, recordava os dois mil anos desta peça e oseu bom estado de conservação: "O bronze é realmente mais resistente ao tempo do quea maior parte das pedras".*Este trabalho partiu da modelação escultórica convencional seguindo-se-lhe autilização das tecnologias digitais no âmbito do CAD 3D, Digitalização Tridimensionale Prototipagem Rápida, com o objectivo de estudar as suas potencialidades no campo daEscultura. Os modelos construÃdos por prototipagem foram convertidos em modelos decera e passados a metal pelo processo de Fundição por Modelo de Cera Perdido
Optoelectronic logic functions based on reconfigurable SiC multilayer devices
WDM multilayered SiC/Si devices based on a-Si:H and a-SiC:H filter design are approached from a reconfigurable point of view. Results show that the devices, under appropriated optical bias, act as reconfigurable active filters that allow optical switching and optoelectronic logic functions development. Under front violet irradiation the magnitude of the red and green channels are amplified and the blue and violet reduced. Violet back irradiation cuts the red channel, slightly influences the magnitude of the green and blue ones and strongly amplifies de violet channel. This nonlinearity provides the possibility for selective removal of useless wavelengths. Particular attention is given to the amplification coefficient weights, which allow taking into account the wavelength background effects when a band needs to be filtered from a wider range of mixed signals, or when optical active filter gates are used to select and filter input signals to specific output ports in WDM communication systems. A truth table of an encoder that performs 8-to-1 multiplexer (MUX) function is presented
Optoelectronic digital capture device based on Si/C multilayer heterostructures
Combined tunable WDM converters based on SiC multilayer photonic active filters are analyzed. The operation combines the properties of active long-pass and short-pass wavelength filter sections into a capacitive active band-pass filter. The sensor element is a multilayered heterostructure produced by PE-CVD. The configuration includes two stacked SiC p-i-n structures sandwiched between two transparent contacts. Transfer function characteristics are studied both theoretically and experimentally. Results show that optical bias activated photonic device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal acting the device as an integrated photonic filter in the visible range. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. A numerical simulation and two building-blocks active circuit is presented and gives insight into the physics of the device
Detection of change in fluorescence between reactive cyan and the yellow fluorophores using a-SiC:H multilayer transducers
The transducer consists of a semiconductor device based on two stacked -i-n heterostructures that were designed to detect the emissions of the fluorescence resonance energy transfer between fluorophores in the cyan (470 nm) and yellow (588 nm) range of the spectrum. This research represents a preliminary study on the use of such wavelength-sensitive devices as photodetectors for this kind of application. The device was characterized through optoelectronic measurements concerning spectral response measurements under different electrical and optical biasing conditions. To simulate the fluorescence resonance energy transfer (FRET) pairs, a chromatic time-dependent combination of cyan and yellow wavelengths was applied to the device. The generated photocurrent was measured under reverse and forward bias to read out the output photocurrent signal. A different wavelength-biasing light was also superimposed. Results show that under reverse bias, the photocurrent signal presents four separate levels, each one assigned to the different wavelength combinations of the FRET pairs. If a blue background is superimposed, the yellow channel is enhanced and the cyan suppressed, while under red irradiation, the opposite behavior occurs. So, under suitable biasing light, the transducer is able to detect separately the cyan and yellow fluorescence pairs. An electrical model, supported by a numerical simulation, supports the transduction mechanism of the device
Logic functions based on optical bias controlled SIC Tandem devices
The purpose of this paper is the design of an optoelectronic circuit based on a-SiC technology, able to act simultaneously as a 4-bit binary encoder or a binary decoder in a 4-to-16 line configurations and show multiplexer-based logical functions. The device consists of a p-i'(a-SiC:H)-n/p-i(a-Si:H)-n multilayered structure produced by PECVD. To analyze it under information-modulated wave (color channels) and uniform irradiation (background) four monochromatic pulsed lights (input channels): red, green, blue and violet shine on the device. Steady state optical bias was superimposed separately from the front and the back sides, and the generated photocurrent was measured.
Results show that the devices, under appropriate optical bias, act as reconfigurable active filters that allow optical switching and optoelectronic logic functions development providing the possibility for selective removal of useless wavelengths. The logic functions needed to construct any other complex logic functions are the NOT, and both or either an AND or an OR. Any other complex logic function that might be found can also be used as building blocks to achieve the functions needed for the retrieval of channels within the WDM communication link. (C) 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei
Use of a-SiC:H Semiconductor-Based Transducer for Glucose Sensing through FRET Analysis
Glucose sensing is an issue with great interest in medical and biological applications. One possible approach to glucose detection takes advantage of measuring changes in fluorescence resonance energy transfer (FRET) between a fluorescent donor and an acceptor within a protein which undergoes glucose-induced changes in conformation. This demands the detection of fluorescent signals in the visible spectrum. In this paper we analyzed the emission spectrum obtained from fluorescent labels attached to a protein which changes its conformation in the presence of glucose using a commercial spectrofluorometer. Different glucose nanosensors were used to measure the output spectra with fluorescent signals located at the cyan and yellow bands of the spectrum. A new device is presented based on multilayered a-SiC:H heterostructures to detect identical transient visible signals. The transducer consists of a p-i'(a-SiC:H)-n/p-i(a-Si:H)-n heterostructure optimized for the detection of the fluorescence resonance energy transfer between fluorophores with excitation in the violet (400 nm) and emissions in the cyan (470 nm) and yellow (588 nm) range of the spectrum. Results show that the device photocurrent signal measured under reverse bias and using appropriate steady state optical bias, allows the separate detection of the cyan and yellow fluorescence signals presented
The study of hydraulic mills in the municipality of Lousada (northern Portugal) - Proposal for a methodological script
A Agência Portuguesa do Ambiente (APA) é possuidora de um valioso
arquivo resultante da atividade centenária desenvolvida pelos diferentes organismos
com tutela sobre a gestão da água e o planeamento dos recursos hÃdricos que importa
conhecer e divulgar. O Arquivo Histórico dos Serviços Hidráulicos é um dos mais ricos
acervos locais do paÃs, reunindo um conjunto milhares de documentos que vão do
século XIX à atualidade, constituindo um repositório documental com caracterÃsticas
impares e um testemunho da identidade, memória e história dos Serviços Hidráulicos.
Os processos arquivados contam casos de estudo que percorrem os usos das águas
públicas para diferentes fins e as modalidades da sua utilização, das quais queremos
destacar os aproveitamentos hidráulicos e a laboração de moinhos. Com este artigo,
pretendemos apresentar um roteiro metodológico para o estudo das formas de
organização dos processos existentes no arquivo sobre os moinhos e aproveitamentos
hidráulicos no concelho de Lousada, no que respeita aos documentos e peças anexas
bem como aos modelos administrativos subjacentes.The Portuguese Environment Agency (APA) is possessed of a valuable
resulting file of the centennial activities carried out by different agencies with oversight
over water management and planning of water resources which is importante to know
and disseminate. The Historical Archives of Hydraulic Services is one of the richest
local collections in the country, bringing together a set thousands of documents ranging
from the nineteenth century to the present, constituting a document repository with odd
features and a testimony of identity, memory and history of Hydraulic Services. The
archived files include case studies that run through the uses of public waters for
different purposes and their methods of use, of which we highlight the hydroelectric
plants and the working of mills. With this article, we aim to provide a methodological
guide for the study of organizational forms of existing processes in the file on the
hydraulic mills and exploitations in the municipality of Lousada, with regard to
accompanying documents and pieces as well as the underlying administrative templates
Integrated photonic filters based on SiC multilayer structures
Combined tunable WDM converters based on SiC multilayer photonic active filters are analyzed. The operation combines the properties of active long-pass and short-pass wavelength filter sections into a capacitive active band-pass filter.
The sensor element is a multilayered heterostructure produced by PE-CVD. The configuration includes two stacked SiC p-i-n structures sandwiched between two transparent contacts. Transfer function characteristics are studied both theoretically and experimentally.
Results show that optical bias activated photonic device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal acting the device as an integrated photonic filter in the visible range. Depending on the wavelength of the external background and irradiation side, the device acts either as a short- or a long-pass band filter or as a band-stop filter. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. A numerical simulation and a two building-blocks active circuit are presented and give insight into the physics of the device. (c) 2013 Elsevier B.V. All rights reserved
SiC multilayer photonic structures with self optical bias amplification
Characteristics of tunable wavelength pi'n/pin filters based on a-SiC:H multilayered stacked cells are studied both experimental and theoretically. Results show that the device combines the demultiplexing operation with the simultaneous photodetection and self amplification of the signal. An algorithm to decode the multiplex signal is established. A capacitive active band-pass filter model is presented and supported by an electrical simulation of the state variable filter circuit. Experimental and simulated results show that the device acts as a state variable filter. It combines the properties of active high-pass and low-pass filter sections into a capacitive active band-pass filter using a changing photo capacitance to control the power delivered to the load
- …