743 research outputs found
Predetermination of Performance Parameters of 3-phase Induction Motor using Numerical Technique Tools
The Circle Diagram was used in past for the performance evaluation of 3-phase induction motor under different load conditions. But, now it is not preferred due to availability of programs for detailed analysis. The per-phase equivalent circuit is also not that suitable to estimate the dynamic performance. In this paper, a method is suggested to determine the performance using dq-model. The objective of this paper is to describe modelling in terms of dq variables. The analysis under steady state condition is done using numerical technique tools. The numerical tools such as Gauss-Seidel and Successive Relaxation methods are used and the results are compared with that obtained from the experiment conducted in the laboratory. The comparison of results confirms the validity as well as the accuracy of the proposed methods, as yet another approach to predetermine the performance
Standardization of Spacing and Soil Volume Wetting for Drip Irrigationin Papaya (Carica papaya L.)
Field experiments in two crops of papaya were conducted at ICAR-Indian Institute of Horticultural Research for four years during 2016-19 to standardise spacing with optimum soil volume wetting for drip irrigation. Narrowing the plant rows drastically reduced the plant height while leaf production affected significantly due to reduction in intra row spacing. The height at first fruiting was significantly lower with a spacing of 1.8 m x 1.5 m (56.4 cm) significantly differing from both 1.5 m x 1.5 m (60.9 cm) or 1.8 m x 1.8 m (66.8 cm). Significantly higher mean fruit yield (42.2 t/ha) was recorded with the spacing of 1.5 m x 1.5m as compared to either 1.8m x 1.5m (23.4 t/ha) or 1.8m x 1.8m (22.1 t/ha). Significantly higher water use efficiency (71.3 kg/ha.mm) was recorded in papaya by following closer spacing of 1.5 m x 1.5 m. Among the interactions, higher papaya yield (48.0 t/ha) was recorded with normal drip irrigation (80% soil volume wetting) under closer spacing (1.5 m. x 1.5 m). Further, higher water use efficiency (129 kg/ha. mm) could be obtained by scheduling the irrigation at 30% soil volume wetting especially by planting at 1.5 m. x 1.5 m. spacing suggesting its suitability for water scarcity areas
Partial root zone drying irrigation in papaya (Carica papaya L.) for enhanced water use efficiency under limited water situations
Field experiments were conducted during 2015-17 at ICAR-Indian Institute of Horticultural Research, Hessaraghatta, Bengaluru, to standardize the partial root zone drying irrigation in papaya with 12 treatments in RBD design. The results indicated that better soil moisture in the root zone could be maintained under drip irrigation by shifting laterals on either side at fortnightly intervals as compared to fixed laterals with thesame amount of water. Significantly more primary roots (16.5/plant) were observed when irrigation was scheduled on one side with single emitter meeting 60% of the evaporative demand. PRD irrigation through shifting of laterals recorded significantly higher transpiration rate especially at 50% of ER (8.05 m mol m-2 s-1) as compared to the control (3.95m mol m-2 s-1). Further, the same treatment recorded significantly lower fruit cavity index (0.26) with relatively higher fruit volume (1388 cm3). Irrigating papaya only on one side with single emitter resulted in significantly higher T.S.S (13.0%). Higher water productivity (23.7 kg/m3) could be obtained by scheduling the irrigation at 40% evaporation replenishment through shifting of laterals with saving of substantial water (1285m3/ha) resulting in higher water use efficiency (237.4 kg/ha.mm)
Design and implementation of DA FIR filter for bio-inspired computing architecture
This paper elucidates the system construct of DA-FIR filter optimized for design of distributed arithmetic (DA) finite impulse response (FIR) filter and is based on architecture with tightly coupled co-processor based data processing units. With a series of look-up-table (LUT) accesses in order to emulate multiply and accumulate operations the constructed DA based FIR filter is implemented on FPGA. The very high speed integrated circuit hardware description language (VHDL) is used implement the proposed filter and the design is verified using simulation. This paper discusses two optimization algorithms and resulting optimizations are incorporated into LUT layer and architecture extractions. The proposed method offers an optimized design in the form of offers average miminimizations of the number of LUT, reduction in populated slices and gate minimization for DA-finite impulse response filter. This research paves a direction towards development of bio inspired computing architectures developed without logically intensive operations, obtaining the desired specifications with respect to performance, timing, and reliability
Efficient Data Transfer Over Wireless Networks
In the present day, efficiency in the field of communication is of utmost importance. In this study, data is transmitted over a wireless network supported by helical antennas. The efficiency is obtained by encoding the data by the Reed Solomon (RS) encoding scheme. The added advantage of this encoding scheme is its error detection and correction scheme in addition to the productive bandwidth usage. The data is encoded from the source and will be modulated using Quadrature Amplitude Modulation (QAM) scheme. The modulated data is then transmitted over a wireless network supported by the helical antenna. In the receiving end, the received signal is demodulated and then decoded. In this study, errors are introduced by the user to demonstrate the error detecting and correcting capabilities. The entire set up is simulated on the MATLAB version 9.5b 2018 software
Emergency Detection and Monitoring Daily Routine of a Cattle using IOT
The main aim of this system is to smarten the infrastructure of cattle farming and to track the biological and physiological activities of cattle by implementing a noninvasive wearable by using IOT. In these, we come into picture the lightning sensor depend upon the climate it will turn on and off, temperature sensor will depend upon room temperature of cattle farm; methane sensor is used to check methane level in the farm; fire sensor depend upon any fire emergency and is responsible for smart lighting and also smart ventilation, it is also responsible for sprinkler actuation to make the infrastructure safer and smarter. We are also implementing automatic food releasing mechanism. We can identify the single cattle count with the help of the IR sensor
GTNet:Guided Transformer Network for Detecting Human-Object Interactions
The human-object interaction (HOI) detection task refers to localizing
humans, localizing objects, and predicting the interactions between each
human-object pair. HOI is considered one of the fundamental steps in truly
understanding complex visual scenes. For detecting HOI, it is important to
utilize relative spatial configurations and object semantics to find salient
spatial regions of images that highlight the interactions between human object
pairs. This issue is addressed by the novel self-attention based guided
transformer network, GTNet. GTNet encodes this spatial contextual information
in human and object visual features via self-attention while achieving state of
the art results on both the V-COCO and HICO-DET datasets. Code will be made
available online.Comment: pre-print, the work is in progres
- …