Phytochemical studies of Melilotus officinalis

GC-MS analysis of the n-hexane extract of Melilotus officinalis seeds revealed twelve compounds with a combined area percentage of 98.33% predominantly, (9Z,12Z)-octadecadienoic acid (20.22%, 366 ppm), 14-methylpentadecanoic acid (19.52%, 353 ppm) and (9E)-octadecenoic acid (15.94%, 289 ppm). Two compounds, namely, cis-coumaric acid-2-O-β-D-glucopyranoside (cis-melilotoside, 1) and 1,2-benzopyrone (coumarin, 2), were isolated from the MeOH extract of the seeds of M. officinalis. The structures of isolated compounds were determined by spectroscopic techniques such as NMR, UV-Vis, and FTIR. The MeOH extract of M. Officinalis was also tested for its antioxidant activity using DPPH assay. The extract showed 29.87% DPPH inhibition at concentration of 100 μg/mL.                     KEY WORDS: Melilotus officinalis, Fatty acid methyl esters, Esterification, GC-MS, DPPH radical scavenging assay, Antioxidant activity   Bull. Chem. Soc. Ethiop. 2021, 35(1), 141-150. DOI: https://dx.doi.org/10.4314/bcse.v35i1.1

Structural engineering of pyrrolo[3,4-: F] benzotriazole-5,7(2 H,6 H)-dione-based polymers for non-fullerene organic solar cells with an efficiency over 12%

In this work, we have synthesized two wide band gap donor polymers based on benzo[1,2-b:4,5-b′]dithiophene (BDT) and pyrrolo[3,4-f]benzotriazole-5,7(2H,6H)-dione (TzBI), namely, PBDT-TzBI and PBDT-F-TzBI and studied their photovoltaic properties by blending them with ITIC as an acceptor. Polymer solar cell devices made from PBDT-TzBI:ITIC and PBDT-F-TzBI:ITIC exhibited power conversion efficiencies (PCEs) of 9.22% and 11.02% and while annealing at 160 \ub0C, improved the device performances to 10.24% and 11.98%, respectively. Upon solvent annealing with diphenyl ether (DPE) (0.5%) and chlorobenzene (CB), the PCE of the PBDT-F-TzBI-based device increased to 12.12%. The introduction of the fluorinated benzodithiophene (BDT-F) moiety on the backbone of PBDT-F-TzBI improved the open circuit voltage, short circuit current and fill factor simultaneously. The high PCEs of the PBDT-F-TzBI:ITIC-based devices were supported by comparison and analysis of the optical and electronic properties, the charge carrier mobilities, exciton dissociation probabilities, and charge recombination behaviors of the devices

Small Band Gap Polymers Synthesized via a Modified Nitration of 4,7-Dibromo-2,1,3-benzothiadiazole

The nitration of 4,7-dibromo-2,1,3-benzothiadiazole was modified by using CF3SO3H and HNO3 as the nitrating agent, and the related yield was improved greatly. On the basis of this improvement, two new small band gap polymers, P1TPQ and P3TPQ, were developed. Bulk heterojunction solar cells based on P3TPO and [6,6]-phenyl-C-71-butyric acid methyl ester exhibit interesting results with a power conversion efficiency of 21% and photoresponse up to 1.1 mu

Expanded Multiband Super-Nyquist CAP Modulation for Highly Bandlimited Organic Visible Light Communications

In this article, we experimentally demonstrate a novel expanded nonorthogonal multiband super-Nyquist carrier-less amplitude and phase (m-ESCAP) modulation for bandlimited organic visible light communication (VLC) systems. The proposed scheme has the same bandwidth requirement as the conventional m-CAP while breaking the orthogonality between subcarriers by purposely overlapping them. We compare m-ESCAP with the conventional m-CAP and a compressed nonorthogonal version of m-CAP (m-SCAP) in terms of measured bit error rate (BER) performance, bit rates, and spectral efficiencies. We show that the m-ESCAP system offers improvement in the bit rate of $\sim$ 10% and 20% compared to the m-CAP and m-SCAP, respectively, and in the spectral efficiency of $\sim$ 20% compared to m-CAP. These gains are achieved at the cost of increased BER, which, however, remains below the 7% forward error correction limit

Experimental demonstration of staggered cap modulation for low bandwidth red-emitting polymer-LED based visible light communications

In this paper we experimentally demonstrate, for the first time, staggered carrier-less amplitude and phase (sCAP) modulation for visible light communication systems based on polymer light-emitting diodes emitting at ∼639 nm. The key advantage offered by sCAP in comparison to conventional multiband CAP is its full use of the available spectrum. In this work, we compare sCAP, which utilises four orthogonal filters to generate the signal, with a conventional 4-band multi-CAP system and on-off keying (OOK). We transmit each modulation format with equal energy and present a record un-coded transmission speed of ∼6 Mb/s. This represents gains of 25% and 65% over the achievable rate using 4-CAP and OOK, respectively

Search for low-mass dark matter via bremsstrahlung radiation and the Migdal effect in SuperCDMS

We present a new analysis of previously published SuperCDMS data using a profile likelihood framework to search for sub-GeV dark matter (DM) particles through two inelastic scattering channels: bremsstrahlung radiation and the Migdal effect. By considering these possible inelastic scattering channels, experimental sensitivity can be extended to DM masses that are undetectable through the DM-nucleon elastic scattering channel, given the energy threshold of current experiments. We exclude DM masses down to 220  MeV/c2 at 2.7×10−30  cm2 via the bremsstrahlung channel. The Migdal channel search provides overall considerably more stringent limits and excludes DM masses down to 30  MeV/c2 at 5.0×10−30  cm2

Precision measurement of the index of refraction of deep glacial ice at radio frequencies at Summit Station, Greenland

Glacial ice is used as a target material for the detection of ultra-high energy neutrinos, by measuring the radio signals that are emitted when those neutrinos interact in the ice. Thanks to the large attenuation length at radio frequencies, these signals can be detected over distances of several kilometers. One experiment taking advantage of this is the Radio Neutrino Observatory Greenland (RNO-G), currently under construction at Summit Station, near the apex of the Greenland ice sheet. These experiments require a thorough understanding of the dielectric properties of ice at radio frequencies. Towards this goal, calibration campaigns have been undertaken at Summit, during which we recorded radio reflections off internal layers in the ice sheet. Using data from the nearby GISP2 and GRIP ice cores, we show that these reflectors can be associated with features in the ice conductivity profiles; we use this connection to determine the index of refraction of the bulk ice as n=1.778 +/- 0.006

25th Anniversary Article: Isoindigo- Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors

Driven by the potential advantages and promising applications of organic solar cells, donor-acceptor (D-A) polymers have been intensively investigated in the past years. One of the strong electron-withdrawing groups that were widely used as acceptors for the construction of D-A polymers for applications in polymer solar cells and FETs is isoindigo. The isoindigo-based polymer solar cells have reached efficiencies up to approximate to 7% and hole mobilities as high as 3.62 cm(2) V-1 s(-1) have been realized by FETs based on isoindigo polymers. Over one hundred isoindigo-based small molecules and polymers have been developed in only three years. This review is an attempt to summarize the structures and properties of the isoindigo-based polymers and small molecules that have been reported in the literature since their inception in 2010. Focus has been given only to the syntheses and device performances of those polymers and small molecules that were designed for use in solar cells and FETs. Attempt has been made to deduce structure-property relationships that would guide the design of isoindigo-based materials. It is expected that this review will present useful guidelines for the design of efficient isoindigo-based materials for applications in solar cells and FETs

Recent Advances in n-Type Polymers for All-Polymer Solar Cells

\ua9 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim All-polymer solar cells (all-PSCs) based on n- and p-type polymers have emerged as promising alternatives to fullerene-based solar cells due to their unique advantages such as good chemical and electronic adjustability, and better thermal and photochemical stabilities. Rapid advances have been made in the development of n-type polymers consisting of various electron acceptor units for all-PSCs. So far, more than 200 n-type polymer acceptors have been reported. In the last seven years, the power conversion efficiency (PCE) of all-PSCs rapidly increased and has now surpassed 10%, meaning they are approaching the performance of state-of-the-art solar cells using fullerene derivatives as acceptors. This review discusses the design criteria, synthesis, and structure–property relationships of n-type polymers that have been used in all-PSCs. Additionally, it highlights the recent progress toward photovoltaic performance enhancement of binary, ternary, and tandem all-PSCs. Finally, the challenges and prospects for further development of all-PSCs are briefly considered