Effect of exenatide on heart rate and blood pressure in subjects with type 2 diabetes mellitus: a double-blind, placebo-controlled, randomized pilot study

<p>Abstract</p> <p>Background</p> <p>Cardiovascular effects of glucose-lowering agents are of increasing interest. Our aim was to assess the effects of the glucagon-like peptide-1 receptor agonist exenatide on heart rate (HR) and blood pressure (BP) in subjects with type 2 diabetes mellitus (T2DM).</p> <p>Methods</p> <p>In this double-blind, placebo-controlled trial, subjects with T2DM on metformin and/or a thiazolidinedione were randomized to receive exenatide (5 μg for 4 weeks followed by 10 μg) or placebo BID for 12 weeks. Heart rate and BP were assessed with 24-hour ambulatory BP monitoring. The primary measure was change from baseline in mean 24-hour HR.</p> <p>Results</p> <p>Fifty-four subjects (28 exenatide, 26 placebo) were randomized and comprised the intent-to-treat population. Baseline values (exenatide and placebo) were (mean ± SE) 74.4 ± 2.1 and 74.5 ± 1.9 beats/minute for HR, 126.4 ± 3.2 and 119.9 ± 2.8 mm Hg for systolic BP (SBP), and 75.2 ± 2.1 and 70.5 ± 2.0 mm Hg for diastolic BP (DBP). At 12 weeks, no significant change from baseline in 24-hour HR was observed with exenatide or placebo (LS mean ± SE, 2.1 ± 1.4 versus -0.7 ± 1.4 beats/minute, respectively; between treatments, p = 0.16). Exenatide therapy was associated with trends toward lower 24-hour, daytime, and nighttime SBP; changes in DBP were similar between groups. No changes in daytime or nighttime rate pressure product were observed. With exenatide, body weight decreased from baseline by -1.8 ± 0.4 kg (p < 0.0001; treatment difference -1.5 ± 0.6 kg, p < 0.05). The most frequently reported adverse event with exenatide was mild to moderate nausea.</p> <p>Conclusions</p> <p>Exenatide demonstrated no clinically meaningful effects on HR over 12 weeks of treatment in subjects with T2DM. The observed trends toward lower SBP with exenatide warrant future investigation.</p> <p>Trial registration</p> <p>NCT00516074</p

Multi-instrument observations of the effects of a solar wind pressure pulse on the high latitude ionosphere : a detailed case study of a geomagnetic sudden impulse

Funding: ARF was supported by an STFC studentship, Science Foundation Ireland Grant 18/FRL/6199, and an Irish Research Council Government of Ireland Postdoctoral Fellowship GOIPD/2022/782. ML, TKY, and SEM acknowledge support from the Science and Technology Facilities Council, UKRI, grant no. ST/W00089X/1. JAC is supported by Royal Society grant DHF\R1\211068. HKS was supported by an STFC studentship. TE was supported by a Leverhulme Trust Early Career Fellowship (ECF-2019-155), the University of Leicester and the University of Glasgow. SJW was supported by NERC studentship NE/L002493/1. MKJ was supported by STFC Grant ST/W00089X/1. JML was supported by the Irish Research Council. LJP was supported by AFOSR MURI Award 26-0201-51-62.The effects of a solar wind pressure pulse on the terrestrial magnetosphere have been observed in detail across multiple datasets. The communication of these effects into the magnetosphere is known as a positive geomagnetic sudden impulse (+SI), and are observed across latitudes and different phenomena to characterise the propagation of +SI effects through the magnetosphere. A superposition of Alfvén and compressional propagation modes are observed in magnetometer signatures, with the dominance of these signatures varying with latitude. For the first time, collocated lobe reconnection convection vortices and region 0 field aligned currents are observed preceding the +SI onset, and an enhancement of these signatures is observed as a result of +SI effects. Finally, cusp auroral emission is observed collocated with the convection and current signatures. For the first time, simultaneous observations across multiple phenomena are presented to confirm models of +SI propagation presented previously.Publisher PDFPeer reviewe

A simple, low-cost conductive composite material for 3D printing of electronic sensors

3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes (‘rapid prototyping’) before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term ‘carbomorph’ and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes

Searches for lepton-flavour-violating decays of the Higgs boson into eτ and μτ in \sqrt{s} = 13 TeV pp collisions with the ATLAS detector

Abstract This paper presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ, performed using data collected with the ATLAS detector at the LHC. The searches are based on a data sample of proton-proton collisions at a centre-of-mass energy s $$\sqrt{s}$$ = 13 TeV, corresponding to an integrated luminosity of 138 fb−1. Leptonic (τ → ℓνℓντ) and hadronic (τ → hadrons ντ) decays of the τ-lepton are considered. Two background estimation techniques are employed: the MC-template method, based on data-corrected simulation samples, and the Symmetry method, based on exploiting the symmetry between electrons and muons in the Standard Model backgrounds. No significant excess of events is observed and the results are interpreted as upper limits on lepton-flavour-violating branching ratios of the Higgs boson. The observed (expected) upper limits set on the branching ratios at 95% confidence level, B $$\mathcal{B}$$ (H → eτ) < 0.20% (0.12%) and B $$\mathcal{B}$$ (H → μτ ) < 0.18% (0.09%), are obtained with the MC-template method from a simultaneous measurement of potential H → eτ and H → μτ signals. The best-fit branching ratio difference, B $$\mathcal{B}$$ (H → μτ) → B $$\mathcal{B}$$ (H → eτ), measured with the Symmetry method in the channel where the τ-lepton decays to leptons, is (0.25 ± 0.10)%, compatible with a value of zero within 2.5σ

Model-independent search for the presence of new physics in events including H → γγ with s \sqrt{s} = 13 TeV pp data recorded by the ATLAS detector at the LHC

Abstract A model-independent search for new physics leading to final states containing a Higgs boson, with a mass of 125.09 GeV, decaying to a pair of photons is performed with 139 fb−1 of s $$\sqrt{s}$$ = 13 TeV pp collision data recorded by the ATLAS detector at the Large Hadron Collider at CERN. This search examines 22 final states categorized by the objects that are produced in association with the Higgs boson. These objects include isolated electrons or muons, hadronically decaying τ-leptons, additional photons, missing transverse momentum, and hadronic jets, as well as jets that are tagged as containing a b-hadron. No significant excesses above Standard Model expectations are observed and limits on the production cross section at 95% confidence level are set. Detector efficiencies are reported for all 22 signal regions, which can be used to convert detector-level cross-section limits reported in this paper to particle-level cross-section constraints

Inclusive-photon production and its dependence on photon isolation in pp collisions at s \sqrt{s} = 13 TeV using 139 fb−1 of ATLAS data

Measurements of differential cross sections are presented for inclusive isolated-photon production in pp collisions at a centre-of-mass energy of 13 TeV provided by the LHC and using 139 fb−1 of data recorded by the ATLAS experiment. The cross sections are measured as functions of the photon transverse energy in different regions of photon pseudorapidity. The photons are required to be isolated by means of a fixed-cone method with two different cone radii. The dependence of the inclusive-photon production on the photon isolation is investigated by measuring the fiducial cross sections as functions of the isolation-cone radius and the ratios of the differential cross sections with different radii in different regions of photon pseudorapidity. The results presented in this paper constitute an improvement with respect to those published by ATLAS earlier: the measurements are provided for different isolation radii and with a more granular segmentation in photon pseudorapidity that can be exploited in improving the determination of the proton parton distribution functions. These improvements provide a more in-depth test of the theoretical predictions. Next-to-leading-order QCD predictions from JETPHOX and SHERPA and next-to-next-to-leading-order QCD predictions from NNLOJET are compared to the measurements, using several parameterisations of the proton parton distribution functions. The measured cross sections are well described by the fixed-order QCD predictions within the experimental and theoretical uncertainties in most of the investigated phase-space region

Combination of searches for invisible decays of the Higgs boson using 139 fb−1 of proton-proton collision data at root s=13 TeV collected with the ATLAS experiment

Many extensions of the Standard Model predict the production of dark matter particles at the LHC. Sufficiently light dark matter particles may be produced in decays of the Higgs boson that would appear invisible to the detector. This Letter presents a statistical combination of searches for H→invisible decays where multiple production modes of the Standard Model Higgs boson are considered. These searches are performed with the ATLAS detector using 139 fb−1of proton–proton collisions at a centre–of–mass energy of √s=13TeV at the LHC. In combination with the results at √s=7TeV and 8TeV, an upper limit on the H→invisible branching ratio of 0.107 (0.077) at the 95% confidence level is observed (expected). These results are also interpreted in the context of models where the 125GeV Higgs boson acts as a portal to dark matter, and limits are set on the scattering cross-section of weakly interacting massive particles and nucleons