A Stimuli-Responsive Nanocomposite for 3D Anisotropic Cell-Guidance and Magnetic Soft Robotics

Stimuli-responsive materials have the potential to enable the generation of new bioinspired devices with unique physicochemical properties and cell-instructive ability. Enhancing biocompatibility while simplifying the production methodologies, as well as enabling the creation of complex constructs, i.e., via 3D (bio)printing technologies, remains key challenge in the field. Here, a novel method is presented to biofabricate cellularized anisotropic hybrid hydrogel through a mild and biocompatible process driven by multiple external stimuli: magnetic field, temperature, and light. A low-intensity magnetic field is used to align mosaic iron oxide nanoparticles (IOPs) into filaments with tunable size within a gelatin methacryloyl matrix. Cells seeded on top or embedded within the hydrogel align to the same axes of the IOPs filaments. Furthermore, in 3D, C2C12 skeletal myoblasts differentiate toward myotubes even in the absence of differentiation media. 3D printing of the nanocomposite hydrogel is achieved and creation of complex heterogeneous structures that respond to magnetic field is demonstrated. By combining the advanced, stimuli-responsive hydrogel with the architectural control provided by bioprinting technologies, 3D constructs can also be created that, although inspired by nature, express functionalities beyond those of native tissue, which have important application in soft robotics, bioactuators, and bionic devices

Fog interception by Ball moss (<i>Tillandsia recurvata</i>)

Interception losses are a major influence in the water yield of vegetated areas. For most storms, rain interception results in less water reaching the ground. However, fog interception can increase the overall water storage capacity of the vegetation and once the storage is exceeded, fog drip is a common hydrological input. Fog interception is disregarded in water budgets of semiarid regions, but for some plant communities, it could be a mechanism offsetting evaporation losses. <i>Tillandsia recurvata</i> is a cosmopolitan epiphyte adapted to arid habitats where fog may be an important water source. Therefore, the interception storage capacity by <i>T. recurvata</i> was measured in controlled conditions and applying simulated rain or fog. Juvenile, vegetative specimens were used to determine the potential upperbound storage capacities. The storage capacity was proportional to dry weight mass. Interception storage capacity (<i>C</i>_min) was 0.19 and 0.56 mm for rainfall and fog respectively. The coefficients obtained in the laboratory were used together with biomass measurements for <i>T. recurvata</i> in a xeric scrub to calculate the depth of water intercepted by rain. <i>T. recurvata</i> contributed 20 % to the rain interception capacity of their shrub hosts: <i>Acacia farnesiana</i> and <i>Prosopis laevigata</i> and; also potentially intercepted 4.8 % of the annual rainfall. Nocturnal stomatic opening in <i>T. recurvata</i> is not only relevant for CO₂ but for water vapor, as suggested by the higher weight change of specimens wetted with fog for 1 h at dark in comparison to those wetted during daylight (543 ± 77 vs. 325 ± 56 mg, <i>p</i> = 0.048). The storage capacity of <i>T. recurvata</i> leaf surfaces could increase the amount of water available for evaporation, but as this species colonise montane forests, the effect could be negative on water recharge, because potential storage capacity is very high, in the laboratory experiments it took up to 12 h at a rate of 0.26 l h⁻¹ to reach saturation conditions when fog was applied

Bone Morphogenetic Protein-9 Is a Potent Chondrogenic and Morphogenic Factor for Articular Cartilage Chondroprogenitors

Articular cartilage contains a subpopulation of tissue-specific progenitors that are an ideal cell type for cell therapies and generating neo-cartilage for tissue engineering applications. However, it is unclear whether the standard chondrogenic medium employing transforming growth factor-β (TGFβ) isoforms is optimal to differentiate these cells. We therefore used pellet culture to screen progenitors from immature bovine articular cartilage with a number of chondrogenic factors and discovered that bone morphogenetic factor-9 (BMP9) precociously induces their differentiation. This difference was apparent with toluidine blue staining and confirmed by biochemical and transcriptional analyses with BMP9 treated progenitors exhibiting 11-fold and 5-fold greater aggrecan and collagen type II gene expression than TGFβ1 treated progenitors. Quantitative gene expression analysis over 14 days highlighted the rapid and phased nature of BMP9 induced chondrogenesis with sequential activation of aggrecan then collagen type II, and negligible collagen type X gene expression. The extracellular matrix of TGFβ1treated progenitors analysed using atomic force microscopy was fibrillar and stiff whist BMP9-induced matrix of cells more compliant and correspondingly less fibrillar. Polarised light microscopy revealed an annular pattern of collagen fibril deposition typified by TGFβ1 treated pellets, whereas BMP9 treated pellets displayed a birefringence pattern that was more anisotropic. Remarkably, differentiated immature chondrocytes incubated as high-density cultures in vitro with BMP9 generated a pronounced anisotropic organisation of collagen fibrils indistinguishable from mature adult articular cartilage, with cells in deeper zones arranged in columnar fashion. This contrasted with cells grown with TGFβ1 where a concentric pattern of collagen fibrils was visualised within tissue pellets. In summary, BMP9 is a potent chondrogenic factor for articular cartilage progenitors and is also capable of inducing morphogenesis of adult-like cartilage, a highly desirable attribute for in vitro tissue-engineered cartilage

Engineering of a complex bone tissue model with endothelialised channels and capillary-like networks

In engineering of tissue analogues, upscaling to clinically-relevant sized constructs remains a significant challenge. The successful integration of a vascular network throughout the engineered tissue is anticipated to overcome the lack of nutrient and oxygen supply to residing cells. This work aimed at developing a multiscale bone-tissue-specific vascularisation strategy. Engineering pre-vascularised bone leads to biological and fabrication dilemmas. To fabricate channels endowed with an endothelium and suitable for osteogenesis, rather stiff materials are preferable, while capillarisation requires soft matrices. To overcome this challenge, gelatine-methacryloyl hydrogels were tailored by changing the degree of functionalisation to allow for cell spreading within the hydrogel, while still enabling endothelialisation on the hydrogel surface. An additional challenge was the combination of the multiple required cell-types within one biomaterial, sharing the same culture medium. Consequently, a new medium composition was investigated that simultaneously allowed for endothelialisation, capillarisation and osteogenesis. Integrated multipotent mesenchymal stromal cells, which give rise to pericyte-like and osteogenic cells, and endothelial-colony-forming cells (ECFCs) which form capillaries and endothelium, were used. Based on the aforementioned optimisation, a construct of 8 × 8 × 3 mm, with a central channel of 600 µm in diameter, was engineered. In this construct, ECFCs covered the channel with endothelium and osteogenic cells resided in the hydrogel, adjacent to self-assembled capillary-like networks. This study showed the promise of engineering complex tissue constructs by means of human primary cells, paving the way for scaling-up and finally overcoming the challenge of engineering vascularised tissues

Kinetic oxygen measurements by CVC96 in L-929 cell cultures

Generally animal and human cells use oxygen during their whole life. Consequently the oxygen use is a simple indicator to test the vitality of cells. When the vitality decreases by the delivery of toxic substances the decrease can be observed directly by the oxygen-use of the cells. To get fast information of the vitality of cells we have measured the O(2)-tension by testing a new model of a bioreactor, the Cell Vitality Checker 96 (CVC96), in practical application. With this CVC96, soon a simple test will exist for the measurement of the oxygen use. In this respect the question had to be answered whether the use in the laboratory is easy and whether oxygen as a parameter in the vitality test can also be applied in future for problems in the field of material testing

Biofabrication: reappraising the definition of an evolving field

Biofabrication is an evolving research field that has recently received significant attention. In particular, the adoption of Biofabrication concepts within the field of Tissue Engineering and Regenerative Medicine has grown tremendously, and has been accompanied by a growing inconsistency in terminology. This article aims at clarifying the position of Biofabrication as a research field with a special focus on its relation to and application for Tissue Engineering and Regenerative Medicine. Within this context, we propose a refined working definition of Biofabrication, including Bioprinting and Bioassembly as complementary strategies within Biofabrication.1111377Ysciescopu

Convergence of melt electrowriting and extrusion-based bioprinting for vascular patterning of a myocardial construct

To progress cardiac tissue engineering strategies closer to the clinic, thicker constructs are required to meet the functional need following a cardiac event. Consequently, pre-vascularization of these constructs needs to be investigated to ensure survival and optimal performance of implantable engineered heart tissue. The aim of this research is to investigate the potential of combining extrusion-based bioprinting (EBB) and melt electrowriting for the fabrication of a myocardial construct with a precisely patterned pre-vascular pathway. Gelatin methacryloyl (GelMA) was investigated as a base hydrogel for the respective myocardial and vascular bioinks with collagen, Matrigel and fibrinogen as interpenetrating polymers to support myocardial functionality. Subsequently, extrusion-based printability and viability were investigated to determine the optimal processing parameters for printing into melt electrowritten meshes. Finally, an anatomically inspired vascular pathway was implemented in a dual EBB set-up into melt electrowritten meshes, creating a patterned pre-vascularized myocardial construct. It was determined that a blend of 5% GelMA and 0.8 mg·ml -1collagen with a low crosslinked density was optimal for myocardial cellular arrangement and alignment within the constructs. For the vascular fraction, the optimized formulation consisted of 5% GelMA, 0.8 mg·ml -1collagen and 1 mg·ml -1fibrinogen with a higher crosslinked density, which led to enhanced vascular cell connectivity. Printability assessment confirmed that the optimized bioinks could effectively fill the microfiber mesh while supporting cell viability (∼70%). Finally, the two bioinks were applied using a dual EBB system for the fabrication of a pre-vascular pathway with the shape of a left anterior descending artery within a myocardial construct, whereby the distinct cell populations could be visualized in their respective patterns up to D14. This research investigated the first step towards developing a thick engineered cardiac tissue construct in which a pre-vascularization pathway is fabricated within a myocardial construct

Lack of concentration-dependent local toxicity of highly concentrated (5%) versus conventional 0.5% bupivacaine following musculoskeletal surgery in a rat model

PURPOSE: Various sustained-release formulations incorporate high bupivacaine concentrations but data on local toxicity is lacking. This study explores local toxic effects of highly concentrated (5%) bupivacaine compared to clinically used concentrations in vivo following skeletal surgery, to assess the safety of sustained-release formulations with high bupivacaine concentrations. METHODS: Sixteen rats underwent surgery, in which screws with catheters affixed were implanted in the spine or femur in a factorial experimental design, allowing single-shot or continuous 72 h local administration of 0.5%, 2.5% or 5.0% bupivacaine hydrochloride. During the 30-day follow-up, animal weight was recorded and blood samples were obtained. Implantation sites underwent histopathological scoring for muscle damage, inflammation, necrosis, periosteal reaction/thickening and osteoblast activity. Effects of bupivacaine concentration, administration mode and implantation site on local toxicity scores were analyzed. RESULTS: Chi-squared tests for score frequencies revealed a concentration-dependent decrease in osteoblast count. Moreover, spinal screw implantation led to significantly more muscle fibrosis but less bone damage than femoral screw implantation, reflecting the more invasive muscle dissection and shorter drilling times related to the spinal procedure. No differences between bupivacaine administration modes regarding histological scoring or body weight changes were observed. Weight increased, while CK levels and leukocyte counts decreased significantly during follow-up, reflecting postoperative recovery. No significant differences in weight, leukocyte count and CK were found between interventional groups. CONCLUSION: This pilot study found limited concentration-dependent local tissue effects of bupivacaine solutions concentrated up to 5.0% following musculoskeletal surgery in the rat study population

Synthesis and characterization of hypoxia-mimicking bioactive glasses for skeletal regeneration

The cellular response to hypoxia (low oxygen pressure) is vital for skeletal tissue development and regeneration. Numerous processes, including progenitor cell recruitment, differentiation and angiogenesis, are activated via the hypoxia pathway. Novel materials-based strategies designed to activate the hypoxia pathway are therefore of great interest for orthopaedic tissue engineering. Resorbable bioactive glasses (BGs) were developed to activate the hypoxia pathway by the controlled release of cobalt ions (at physiological relevant concentrations) whilst controlling BG apatite-forming ability. Two series of soda-lime-phosphosilicate glasses were synthesised with increasing concentrations of cobalt. Compositions were calculated to maintain constant network connectivity (2.13) by considering that cobalt is taking part in the network in the first series, and is acting as a network modifier in the second series. Mg2+ and Zn2+ were added to one of the Co2+-containing glasses to inhibit HCA formation. The presence of HCA formation is undesirable for the use of BG in soft tissues e. g. cartilage. Cobalt was present in both the silicate and phosphate phases of the BG. In addition, evidence was found that it plays a dual role in the silicate phase, entering the network as well as disrupting it as a network modifying oxide. Consistent with this dual role, the presence of cobalt in the BG was shown to decrease ion release. HCA formation was delayed with cobalt addition as well as incorporation of Mg2+ and Zn2+ into the BGs. Importantly, cobalt release was found to be proportional to cobalt content of the BGs enabling the controlled delivery of cobalt in therapeutically active doses