19 research outputs found
A Novel Hybrid Particle Swarm Optimization and Sine Cosine Algorithm for Seismic Optimization of Retaining Structures
This study introduces an effective hybrid optimization algorithm, namely Particle Swarm Sine Cosine Algorithm (PSSCA) for numerical function optimization and automating optimum design of retaining structures under seismic loads. The new algorithm employs the dynamic behavior of sine and cosine functions in the velocity updating operation of particle swarm optimization (PSO) to achieve faster convergence and better accuracy of final solution without getting trapped in local minima. The proposed algorithm is tested over a set of 16 benchmark functions and the results are compared with other well-known algorithms in the field of optimization. For seismic optimization of retaining structure, Mononobe-Okabe method is employed for dynamic loading condition and total construction cost of the structure is considered as the objective function. Finally, optimization of two retaining structures under static and seismic loading are considered from the literature. As results demonstrate, the PSSCA is superior and it could generate better optimal solutions compared with other competitive algorithms
Analytical design of a radial-flux PM generator for direct-drive wind turbine renewable energy application
Renewable energy resources have attracted the attention of the power generation industry in recent years as they have no pollution and the advantage of unlimited energy harvesting. One of these resources is the wind that is available in most areas of the world. Electrical energy generation from wind power requires suitable generators that different types and systems have been studied in the literature. In this study, the design of a 1 kW, 50 Hz, and 500 RPM permanent magnet generator using analytical electromagnetic fields analysis is presented that is based on the initial requirements of a wind power generation system. Also, performance analysis of the designed generator of simulations using the finite element approach has been investigated. The simulation results of the generator characteristics including, output voltage and power verifies the initial design constraints and required performances. The novelty of this study investigates the design and performance characteristic analysis of a radial-flux PM generator for wind power generation application
Adaptive Rat Swarm Optimization for Optimum Tuning of SVC and PSS in a Power System
This paper presents a new approach for the coordinated design of a power system stabilizer- (PSS-) and static VAR compensator- (SVC-) based stabilizer. For this purpose, the design problem is considered as an optimization problem, while the decision variables are the controllers' parameters. This paper proposes an effective optimization algorithm based on a rat swarm optimizer, namely, adaptive rat swarm optimization (ARSO), for solving complex optimization problems as well as coordinated design of controllers. In the proposed ARSO, instead of a random initial population, the algorithm starts the search process with fitter solutions using the concept of the opposite number. In addition, in each iteration of the optimization, the new algorithm replaces the worst solution with its opposite or a random part of the best solution to avoid getting trapped in local optima and increase the global search ability of the algorithm. The performance of the new ARSO is investigated using a set of benchmark test functions, and the results are compared with those of the standard RSO and some other methods from the literature. In addition, a case study from the literature is considered to evaluate the efficiency of the proposed ARSO for coordinated design of controllers in a power system. PSSs and additional SVC controllers are being considered to demonstrate the feasibility of the new technique. The numerical investigations show that the new approach may provide better optimal damping and outperform previous methods
Economic Design of Retaining Wall Using Particle Swarm Optimization with Passive Congregation
Abstract: This paper presents an effective optimization method for nonlinear constrained optimization of retaining structures. The proposed algorithm is based on the particle swarm optimization with passive congregation. The optimization procedure controls all geotechnical and structural design constraints while reducing the overall cost of the retaining wall. To applying the constraints, the algorithm employs penalty function method. To verify the efficiency of the proposed method, two design examples of retaining structures are illustrated. Comparison analysis between the results of the presented methodology, standard particle swarm optimization and nonlinear programming optimization method show the ability of the proposed algorithm to find better optimal solutions for retaining wall tasks than the others
Maximizing micro-grid energy output with modified chaos grasshopper algorithms
This study presents a Modified version of Chaos Grasshopper Algorithm (MCGA) as a solution to the Techno-Economic Energy Management Strategy (TEMS) problem in microgrids. Our main contribution is the optimization of parameters to minimize the overall daily electricity price in an integrated clean energy micro-grid, incorporating fuel cell, battery storage, and photovoltaic systems. Through comparative simulations with established methods (HOMER, GAMS, GWO, and MILPA), we demonstrate the superiority of our proposed strategy. The results reveal that MCGA surpasses these methods, yielding significantly improved optimal solutions for the overall daily electricity price. Notably, the MCGA approach exhibits high precision, flexibility, and adaptability to power prices and environmental constraints, leading to accurate and flexible solutions. Thus, our proposed approach offers a promising and effective solution for the TEMS problem in microgrids, with the potential to greatly enhance microgrid performance
Simultaneous Employment of Generation Rescheduling and Incentive-based Demand Response Programs for Congestion Management in Case of Contingency
Relieving congestion significantly influences the operation and security of the transmission network. Consequently, the congestion alleviation of transmission network in all power systems is imperative. Moreover, it could prevent price spikes and/or involuntary load shedding and impose high expenses on the transimission network, especially in case of contingency. Traditionally, the increasing or decreasing generation rescheduling has been used as one of the most imperative approaches for correctional congestion management when a contingency occurs. However, demand response programs (DRPs) could also be a vital tool for managing the congestion. Therefore, the simultaneous employment of generation rescheduling and DRPs is proposed for congestion management in case of contingency. The objective is to reschedule the generation of power plants and to employ DRPs in such a way so as to lessen the cost of congestion. The crow search algorithm is employed to determine the solution. The accuracy and efficiency of the proposed approach are assessed through the tests conducted on IEEE 30-bus and 57-bus test systems. The results of various case studies indicate the better performance of the proposed approach in comparison with different approaches presented in the literature
Distance optimization and directional overcurrent relay coordination using edge-powered biogeography-genetic algorithms
Abstract The effective functioning and regulation of power systems crucially rely on the coordination of distance and directional overcurrent relays. Accurate fault detection and successful clearing sequences require support for each relay and the maintenance of the coordination time interval (CTI) between major distance relays, directional overcurrent relay support, and other relay zones. Efficiently initiating relays while adhering to complex coordination limitations poses a challenging task that demands innovative solutions. This study addresses the intricate problem of relay coordination by employing heuristic methods, specifically genetic algorithms (GA) and biogeography-based optimization (BBO), in both a 9-bus and 39-bus system. The primary objective is to determine the most efficient time setting factor (TSM) that minimizes the duration of relay operation. Additionally, the intelligent features of the overcurrent relay are carefully chosen to enhance the research's results. The integration of edge computing capabilities plays a significant role in advancing this coordination method. By incorporating advanced algorithms and communication technologies at the edge, the prompt activation of relays becomes possible, thereby meeting coordination demands. This study explores the combination of edge-based servers with genetic algorithms (GA) and biogeography-based optimization (BBO) techniques to enhance relay coordination. The findings indicate a notable enhancement compared to conventional approaches. However, comparative research suggests that BBO's performance is similar to GA, without a distinct advantage in achieving higher outcomes
A Novel Hybrid Sine Cosine Algorithm and Pattern Search for Optimal Coordination of Power System Damping Controllers
This paper presents an effective hybrid optimization technique based on a chaotic sine cosine algorithm (CSCA) and pattern search (PS) for the coordinated design of power system stabilizers (PSSs) and static VAR compensator (SVC)-based controllers. For this purpose, the design problem is considered as an optimization problem whose decision variables are the controllers’ parameters. Due to the nonlinearities of large, interconnected power systems, methods capable of handling any nonlinearity of power networks are preferable. In this regard, a nonlinear time domain-based objective function was used. Then, the proposed hybrid chaotic sine cosine pattern search (hCSC-PS) algorithm was employed for solving this optimization problem. The proposed method employed the global search ability of SCA and the local search ability of PS. The performance of the new hCSC-PS was investigated using a set of benchmark functions, and then the results were compared with those of the standard SCA and some other methods from the literature. In addition, a case study from the literature is considered to evaluate the efficiency of the proposed hCSC-PS for the coordinated design of controllers in the power system. PSSs and additional SVC controllers are being considered to demonstrate the feasibility of the new technique. In order to ensure the robustness and performance of the proposed controller, the objective function is evaluated for various extreme loading conditions and system configurations. The numerical investigations show that the new approach may provide better optimal damping and outperforms previous methods. Nonlinear time-domain simulation shows the superiority of the proposed controller and its ability in providing efficient damping of electromechanical oscillations
A Novel Hybrid Sine Cosine Algorithm and Pattern Search for Optimal Coordination of Power System Damping Controllers
This paper presents an effective hybrid optimization technique based on a chaotic sine cosine algorithm (CSCA) and pattern search (PS) for the coordinated design of power system stabilizers (PSSs) and static VAR compensator (SVC)-based controllers. For this purpose, the design problem is considered as an optimization problem whose decision variables are the controllers’ parameters. Due to the nonlinearities of large, interconnected power systems, methods capable of handling any nonlinearity of power networks are preferable. In this regard, a nonlinear time domain-based objective function was used. Then, the proposed hybrid chaotic sine cosine pattern search (hCSC-PS) algorithm was employed for solving this optimization problem. The proposed method employed the global search ability of SCA and the local search ability of PS. The performance of the new hCSC-PS was investigated using a set of benchmark functions, and then the results were compared with those of the standard SCA and some other methods from the literature. In addition, a case study from the literature is considered to evaluate the efficiency of the proposed hCSC-PS for the coordinated design of controllers in the power system. PSSs and additional SVC controllers are being considered to demonstrate the feasibility of the new technique. In order to ensure the robustness and performance of the proposed controller, the objective function is evaluated for various extreme loading conditions and system configurations. The numerical investigations show that the new approach may provide better optimal damping and outperforms previous methods. Nonlinear time-domain simulation shows the superiority of the proposed controller and its ability in providing efficient damping of electromechanical oscillations