Crocin loaded nano-emulsions: Factors affecting emulsion properties in spontaneous emulsification

Spontaneous emulsification may be used for encapsulating bioactive compounds in food and pharmaceutical industry. It has several advantages over high energy and other low energy methods including, protecting sensitive compounds against severe conditions of high energy method and its ability to minimize surfactant, removal of cosurfactant and thermal stability compared with other low energy methods. In this study, we examined possibility of encapsulating highly soluble crocin in W/O micro-emulsions using spontaneous method which further could be used for making double emulsions. Nonionic surfactants of Span 80 and polyglycerol polyricinoleate (PGPR) were used for making micro-emulsions that showed the high potential of PGPR for spontaneous method. Surfactant to water ratio (SWR) was evaluated to find the highest amount of aqueous phase which can be dispersed in organic phase. Droplet size decreased by increasing SWR toward the SWR = 100 which had the smallest droplet size and then increased at higher levels of surfactant. By increasing SWR, shear viscosity increased which showed the high effect of PGPR on rheological properties. This study shows in addition to W/O micro-emulsions, spontaneous method could be used for preparing stable O/W micro-emulsions. © 2015 Elsevier B.V

Monitoring hydroperoxides formation as a measure of predicting walnut oxidative stability

It is believed that lipids are the most important factor affecting nuts shelf-life. In the present study, an accelerated shelf-life testing by means of elevated temperatures 62, 72, and 82 °C was conducted to predict the oxidation stability of walnuts over a long-term storage. Peroxide value (PV) was employed to monitor the lipid oxidation progression in the walnuts. A range of 74.01–79.57 kJ mol−1 K−1 energy was required for formation of primary oxidation products. The reaction changes followed an apparent first-order kinetic. Formation of hydroperoxides in walnut kernels was found to be a temperature-dependent reaction with Q10 of 2.1. Walnut kernels were also kept in normal condition (temp: 20–30 °C; relative humidity (RH): 35–45%) for 12 months to validate the shelf-life estimation approach. The results showed that PV could provide a proper estimation for oxidative stability of the walnuts stored in ordinary condition

Consanguineous marriage, prepregnancy maternal characteristics and stillbirth risk: A population-based case-control study

Introduction. Consanguineous marriage is associated with increased risks for congenital anomalies, low birthweight, and other adverse perinatal outcomes. In this population-based, case-control study we investigated the association between consanguineous marriage (first-cousin marriage) and stillbirth risk, using prospectively collected information from prepregnancy visits. Material and methods. From 2007 to 2009, we identified 283 stillbirths (cases) and 2088 randomly selected live control births through prepregnancy visits in rural Golestan, Iran. The associations between consanguinity and prepregnancy maternal characteristics and stillbirth risk were examined using multivariate logistic regression. Results. The rate of consanguineous marriage was 19.4% among cases and 13.6% among controls. Consanguinity was associated with increased stillbirth risk [odds ratio (OR) 1.53; 95% CI 1.10-2.14]. The association was significantly increased for preterm stillbirth (< 37 gestational weeks) (OR 2.43; 95% CI 1.46-4.04) but not for term stillbirth (≥ 37 weeks) (OR 1.14; 95% CI 0.75-1.74). Low and high maternal age, underweight, obesity, nulliparity, a history of infertility or miscarriage, previous obstetric complications (preeclampsia, preterm delivery, and stillbirth in previous pregnancies) were also associated with increased stillbirth risks. Conclusions. Consanguineous marriage is associated with increased risk of stillbirth, particularly preterm stillbirth. Findings for other maternal risk factors for stillbirth in rural Iran are consistent with previously reported findings from high-income countries. © 2015 Nordic Federation of Societies of Obstetrics and Gynecology

Effects of different emulsifiers and refining time on rheological and textural characteristics of compound chocolate.

The purpose of this study was to investigate the possibility of producing reduced fat dark compound chocolate in the ball mill refiner and using some selected emulsifiers. The effects of selected emulsifiers including lecithin, Polyglycerol polyricinoleate (PGPR) and citrem in two levels and two refining times on the characteristics such as moisture, particle size, hardness and rheological properties of the samples was examined. Data analysis revealed that the Casson model was appropriate to describe the rheological behavior of the samples containing lecithin and citrem; however, Power law model was appropriate for the samples containing PGPR. The results showed that citrem is the most effective emulsifier to reduce hardness and rheological parameters such as apparent viscosity; casson viscosity and casson yield value and using citrem as a part of formulation in the production of reduced fat dark compound chocolate can solve many technological problems

Strategies for fast and low-dose laboratory-based phase contrast tomography for microstructural scaffold analysis in tissue engineering

The application of x-ray phase contrast computed tomography (PCT) to the field of tissue engineering is dis- cussed. Specific focus is on the edge illumination PCT method, which can be adapted to weakly coherent x-ray sources, permitting PCT imaging in standard (non-synchrotron) laboratory environments. The method was applied to a prominent research topic in tissue engineering, namely the development of effective and reliable decellularization protocols to derive scaffolds from native tissue. Results show that edge illumination PCT provides sufficient image quality to evaluate the microstructural integrity of scaffolds and, thus, to assess the performance of the used decellularization technique. In order to highlight that edge illumination PCT can ultimately comply with demands on a high specimen throughput and low doses of radiation, recently developed strategies for scan time and dose reduction are discussed

High contrast microstructural visualisation of natural acellular matrices by means of phase-based x-ray tomography

Acellular scaffolds obtained via decellularization are a key instrument in regenerative medicine both per se and to drive the development of future-generation synthetic scaffolds that could become available off-the-shelf. In this framework, imaging is key to the understanding of the scaffolds’ internal structure as well as their interaction with ells and other organs, including ideally post-implantation. Scaffolds of a wide range of intricate organs (oesophagus, lung, liver and small intestine) were imaged with x-ray phase contrast computed tomography (PC-CT). Image quality was sufficiently high to visualize scaffold micro architecture and to detect major anatomical features, such as the oesophageal mucosal-submucosal separation, pulmonary alveoli and intestinal villi. These results are a long-sought step for the field of regenerative medicine: until now, histology and scanning electron microscopy have been the gold standard to study the scaffold structure. However, they are both destructive: hence, they are not suitable for imaging scaffolds prior to transplantation, and have no prospect for post-transplantation use. PC-CT, on the other hand, is non-destructive, 3D and fully quantitative. Importantly, not only do we demonstrate achievement of high image quality at two different synchrotron facilities, but also with commercially available x-ray equipment, which makes the method instantly available worldwide to any research laboratory

Opportunities for phase-based computed tomography in the laboratory

It has been demonstrated in many instances that phase-based computed tomography (CT) can provide superior contrast-to-noise ratio for weakly attenuating samples than attenuation-based CT. In order to exploit this benefit on a wider scale, phase-based tomography implementations must be compatible with standard x-ray equipment. The edge illumination method, which is based on aperturing a beam and measuring spatial displacements caused by refraction, is an attractive choice for such use due to its low requirements on spatial and temporal coherence. This document provides a brief introduction to the working principle of the edge illumination method and reviews recent advances that lead to increased robustness, faster acquisitions and lower dose delivery. Moreover, it reports on a recent study in which the edge illumination method was applied to samples from the field of tissue engineering, yielding synchrotron-like image quality with exclusively commercially available, laboratory-based x-ray equipment

Preservation of micro-architecture and angiogenic potential in a pulmonary acellular matrix obtained using intermittent intra-tracheal flow of detergent enzymatic treatment

Tissue engineering of autologous lung tissue aims to become a therapeutic alternative to transplantation. Efforts published so far in creating scaffolds have used harsh decellularization techniques that damage the extracellular matrix (ECM), deplete its components and take up to 5 weeks to perform. The aim of this study was to create a lung natural acellular scaffold using a method that will reduce the time of production and better preserve scaffold architecture and ECM components. Decellularization of rat lungs via the intratracheal route removed most of the nuclear material when compared to the other entry points. An intermittent inflation approach that mimics lung respiration yielded an acellular scaffold in a shorter time with an improved preservation of pulmonary micro-architecture. Electron microscopy demonstrated the maintenance of an intact alveolar network, with no evidence of collapse or tearing. Pulsatile dye injection via the vasculature indicated an intact capillary network in the scaffold. Morphometry analysis demonstrated a significant increase in alveolar fractional volume, with alveolar size analysis confirming that alveolar dimensions were maintained. Biomechanical testing of the scaffolds indicated an increase in resistance and elastance when compared to fresh lungs. Staining and quantification for ECM components showed a presence of collagen, elastin, GAG and laminin. The intratracheal intermittent decellularization methodology could be translated to sheep lungs, demonstrating a preservation of ECM components, alveolar and vascular architecture. Decellularization treatment and methodology preserves lung architecture and ECM whilst reducing the production time to 3 h. Cell seeding and in vivo experiments are necessary to proceed towards clinical translation

Evidence of in Vivo Existence of Borrelia Biofilm in Borrelial Lymphocytomas

Lyme borreliosis, caused by the spirochete Borrelia burgdorferi sensu lato, has grown into a major public health problem. We recently identified a novel morphological form of B. burgdorferi, called biofilm, a structure that is well known to be highly resistant to antibiotics. However, there is no evidence of the existence of Borrelia biofilm in vivo; therefore, the main goal of this study was to determine the presence of Borrelia biofilm in infected human skin tissues. Archived skin biopsy tissues from borrelial lymphocytomas (BL) were reexamined for the presence of B. burgdorferi sensu lato using Borrelia-specific immunohistochemical staining (IHC), fluorescent in situ hybridization, combined fluorescent in situ hybridization (FISH)—IHC, polymerase chain reaction (PCR), and fluorescent and atomic force microscopy methods. Our morphological and histological analyses showed that significant amounts of Borrelia-positive spirochetes and aggregates exist in the BL tissues. Analyzing structures positive for Borrelia showed that aggregates, but not spirochetes, expressed biofilm markers such as protective layers of different mucopolysaccharides, especially alginate. Atomic force microscopy revealed additional hallmark biofilm features of the Borrelia/alginate-positive aggregates such as inside channels and surface protrusions. In summary, this is the first study that demonstrates the presence of Borrelia biofilm in human infected skin tissues