Orthogonal cut of SPS-sintered composites with ferrous matrix and Fe Mo S particles: Numerical and experimental analysis

Metal-matrix composites with solid lubricant reinforcements may present a suitable alternative to improve the tribological behavior of sintered components. Besides the performance during the application, the presence of solid lubricants may also modify component manufacture, for example, during machining operations to achieve complex shapes not directly obtained from the sintering process. This work describes a numerical and experimental analysis on the orthogonal cut of metal-matrix composites composed of FeMoS particles embedded in an Astaloy 85 Mo (Höganäes AB) matrix. Specimens were prepared using the Spark-Plasma Sintering (SPS) technique, from mixtures containing powders of Astaloy 85 Mo steel and 2 wt% or 4 wt% of molybdenum disulfide (MoS2). An unreinforced Astaloy 85 Mo specimen (without MoS2) was also included in the analysis. Different microstructures were observed after SPS. The unreinforced specimen presented a ferrite-pearlite structure with a porosity level below 2% and the specimen sintered with 2 wt% of MoS2 presented iron sulfide particles dispersed in the steel matrix. The structure of the specimen sintered with 4 wt % was more complex, with two distinct phases dispersed in the Astaloy 85 Mo matrix. Experimental orthogonal cuts were conducted on the three specimens using a shaper machine tool equipped with a tungsten carbide (WCCo) cutting insert. Tests were recorded using a high-speed camera. The machined surfaces were later analyzed with an optical profilometer and in a scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS). The chips were also characterized. The cutting operation was simulated by two-dimensional (2D) finite-element analysis. The meshes were prepared based on the specimen microstructures and considering the properties of the individual phases. Results have indicated significant differences in the cutting process. Observation of the chip surfaces indicates plastic deformation on the unreinforced specimen, in opposition to more uniform scratches on the composite surfaces, especially that of the specimen sintered with 4 wt % of MoS2

Patients’ Comprehension of Mindfulness-Based Cognitive Behavioral Therapy in an Outpatient Clinic for Resistant Depression: A Cross-Sectional Study

The current study investigated the comprehension of mindfulness-based cognitive behavioral therapy (MBCT) by patients with resistant depression at the Psychiatry Institute of the Federal University of Rio de Janeiro, Brazil. This was the first time the model was used in the institution to treat these patients. In this study, 45 patients were invited to participate in a baseline session of MBCT that consisted in the explanation of the model and experimental exercises conducted by two experienced therapists. Twenty eight patients accepted to participate. At the end of the intervention, the patients completed a self-administered questionnaire designed by our ambulatory to assess their understanding of the method’s goals. Patients with anxiety disorder was also accessed for group comparison. More than 75% of the patients rated the intervention as comprehensible and workable. Compared to patients with depression, patients with anxiety had a better understanding of the mindfulness framework (6.5%) and the meaning of cognitive behavioral therapy (17.6%). Patients that completed the intervention described the baseline session of MBCT as comprehensive and acceptable. These results may allow possible future developments in the practice of mindfulness as a treatment applicable in many condition and settings even in the Brazilian context

Tribological Performance of Random Sinter Pores vs. Deterministic Laser Surface Textures: An Experimental and Machine Learning Approach

This work critically scrutinizes and compares the tribological performance of randomly distributed surface pores in sintered materials and precisely tailored laser textures produced by different laser surface texturing techniques. The pore distributions and dimensions were modified by changing the sintering parameters, while the topological features of the laser textures were varied by changing the laser sources and structuring parameters. Ball-on-disc tribological experiments were carried out under lubricated combined sliding-rolling conditions. Film thickness was measured in-situ through a specific interferometry technique developed for the study of rough surfaces. Furthermore, a machine learning approach based on the radial basis function method was proposed to predict the frictional behavior of contact interfaces with surface irregularities. The main results show that both sintered and laser textured materials can reduce friction compared to the untextured material under certain operating conditions. Moreover, the machine learning model was shown to predict results with satisfactory accuracy. It was also found that the performance of sintered materials could lead to similar improvements as achieved by textured surfaces, even if surface pores are randomly distributed and not precisely controlled

Ion Exchange Chromatography and Mass Bias Correction for Accurate and Precise Zn Isotope Ratio Measurements in Environmental Reference Materials by MC-ICP-MS

Precise and accurate d66/64Zn data for environmental reference materials (RMs) including rocks, sediments, soils and plants are presented in order to improve the metrological traceability and analytical control of Zn isotope ratio determinations in future environmental studies. Previously developed ion exchange chromatography protocols were adjusted to enable faster sample throughput and instrumental mass bias processes were investigated. The improved chromatographic protocol yielded precise and quantitative recoveries (99 ± 7%, σ, n = 16), while the mass bias correction using Cu as external dopant provided precisions better than 0.02‰, 2σ, n = 7. Investigations into spectral and non-spectral interferences identified significant formation of Cr and Ti oxides and hydroxide ionic species. Analysis of six RMs (BHVO-2 basalt (USGS), BCR-2 basalt (USGS), AGV-2 andesite (USGS), 2709 San Joaquin soil (NIST), 1646a estuarine sediment (NIST) and 1573a tomato leaves (NIST)) showed good reproducibility (< 0.01‰, 2s, 5 ≤ n ≥ 1)

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Microstructural Characterization and the Effect of Phase Transformations on Toughness of the UNS S31803 Duplex Stainless Steel Aged Treated at 850 °C

Duplex stainless steels, with ferritic-austenitic microstructure, have excellent mechanical properties and corrosion resistance. However, when duplex stainless steels are exposed to temperatures between 600 and 1000 °C, some phase transformations can occur such as chromium nitrides precipitation, chromium carbides precipitation and the sigma phase formation. The formation of such compounds leads to loss in both corrosion resistance and fracture toughness. The negative effects of the formation of chromium nitrides, carbides and the sigma phase are due to the chromium depletion in the matrix. The phase transformations cited above occur initially at ferritic-austenitic interfaces and at the grain boundaries. The aim of this work is to identify and characterize the phase transformations, which occur when aging heat treatments are carried out at temperatures at which the kinetics is the fastest for the reactions mentioned. At first, the samples were annealed at 1100 °C for 40 min. The aging heat treatments were then carried out at 850 °C for 6, 40 e 600 min. Microstructural characterization was done by using optical microscopy with different etchings, in order to identify each phase formed in the duplex stainless steel during aging heat treatments. The toughness was also evaluated by using Charpy impact test. Impact tests show that loss of toughness was related to phase transformations