1,024 research outputs found
Effects of various physical activities on the physical fitness of university men
Reprinted from the Supplement to the Research Quarterly of the American Physical Education Ass'n. Thesis (Ed.M.)--Boston Universit
Characterising plastic collapse of pipe bend structures
Two recently proposed design by analysis criteria of plastic collapse based on plastic work concepts, the plastic work (PW) criterion and the plastic work curvature (PWC) criterion, are applied to a strain hardening pipe bend arrangement subject to combined pressure and in-plane moment loading. Calculated plastic pressure-moment interaction surfaces are compared with limit surfaces, large deformation analysis instability surfaces and plastic load surfaces given by the ASME Twice Elastic Slope criterion and the tangent intersection criterion. The results show that both large deformation theory and material strain hardening have a significant effect on the elastic-plastic response and calculated static strength of the component. The PW criterion is relatively simple to apply in practice and gives plastic load values similar to the tangent intersection criterion. The PWC criterion is more subjective to apply in practice but it allows the designer to follow the development of the gross plastic deformation mechanism in more detail. The PWC criterion indicates a more significant strain hardening strength enhancement effect than the other criteria considered, leading to a higher calculated plastic load
A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : theoretical development
Ensuring sufficient safety against ratchet is a fundamental requirement in pressure vessel design. Determining the ratchet boundary can prove difficult and computationally expensive when using a full elastic-plastic finite element analysis and a number of direct methods have been proposed that overcome the difficulties associated with ratchet boundary evaluation. Here, a new approach based on fully implicit Finite Element methods, similar to conventional elastic-plastic methods, is presented. The method utilizes a two-stage procedure. The first stage determines the cyclic stress state, which can include a varying residual stress component, by repeatedly converging on the solution for the different loads by superposition of elastic stress solutions using a modified elastic-plastic solution. The second stage calculates the constant loads which can be added to the steady cycle whilst ensuring the equivalent stresses remain below a modified yield strength. During stage 2 the modified yield strength is updated throughout the analysis, thus satisfying Melanâs Lower bound ratchet theorem. This is achieved utilizing the same elastic plastic model as the first stage, and a modified radial return method. The proposed methods are shown to provide better agreement with upper bound ratchet methods than other lower bound ratchet methods, however limitations in these are identified and discussed
A fully implicit multi-axial solution strategy for direct ratchet boundary evaluation : implementation and comparison
Ensuring sufficient safety against ratcheting is a fundamental requirement in pressure vessel design. However, determining the ratchet boundary using a full elastic plastic finite element analysis can be problematic and a number of direct methods have been proposed to overcome difficulties associated with ratchet boundary evaluation. This paper proposes a new lower bound ratchet analysis approach, similar to the previously proposed Hybrid method but based on fully implicit elastic-plastic solution strategies. The method utilizes superimposed elastic stresses and modified radial return integration to converge on the residual state throughout, resulting in one Finite Element model suitable for solving the cyclic stresses (Stage 1) and performing the augmented limit analysis to determine the ratchet boundary (Stage 2). The modified radial return methods for both stages of the analysis are presented, with the corresponding stress update algorithm and resulting consistent tangent moduli. Comparisons with other direct methods for selected benchmark problems are presented. It is shown that the proposed method evaluates a consistent lower bound estimate of the ratchet boundary, which has not previously been clearly demonstrated for other lower bound approaches. Limitations in the description of plastic strains and compatibility during the ratchet analysis are identified as being a cause for the differences between the proposed methods and current upper bound methods
Plastic load evaluation for a fixed tube sheet heat exchanger subject to proportional loading
The plastic load of pressurised components can be calculated based on both the twice elastic slope and tangent methods. Both methods are problematic since they rely on parameters that are localised and therefore have a strong dependency on the gradient of the stressâstrain diagram in the plastic region. The criterion of curvature of plastic work is a suitable replacement for the above techniques. This method calculates total plastic work done on the structure and relates its change to the curvature of the load-plastic work plot. In this work the plastic load has been calculated for a fixed tube sheet exchanger according to curvature criteria using various hardening scenarios. Plastic loads calculated by other methods also have been reported. It has been indicated that tube sheet thickness calculated according to the classical ASME procedure can be significantly reduced when based on the curvature criteria
Multiphysics models for friction stir welding simulation
Purpose: The Friction Stir Welding (FSW) process comprises of several highly coupled (and non-linear) physical phenomena: large plastic deformation, material flow transportation, mechanical stirring of the tool, tool-workpiece surface interaction, dynamic structural evolution, heat generation from friction and plastic deformation, etc. In this paper, an advanced Finite Element (FE) model encapsulating this complex behavior is presented and various aspects associated with the FE model such as contact modeling, material model and meshing techniques are discussed in detail. Methodology: The numerical model is continuum solid mechanics-based, fully thermomechanically coupled and has successfully simulated the friction stir welding process including plunging, dwelling and welding stages. Findings: The development of several field variables are quantified by the model: temperature, stress, strain, etc. Material movement is visualized by defining tracer particles at the locations of interest. The numerically computed material flow patterns are in very good agreement with the general findings from experiments. Value: The model is, to the best of the authorsâ knowledge, the most advanced simulation of FSW published in the literature
Gross plastic deformation of axisymmetric pressure vessel heads
The gross plastic deformation and associated plastic loads of four axisymmetric torispherical pressure vessels are determined by two criteria of plastic collapse: the ASME twice elastic slope (TES) criterion and the recently proposed plastic work curvature (PWC) criterion. Finite element analysis was performed assuming small and large deformation theory and elasticâperfectly plastic and bilinear kinematic hardening material models. Two plastic collapse modes are identified: bending-dominated plastic collapse of the knuckle region in small deformation models and membrane-dominated plastic collapse of the cylinder or domed end in large deformation models. In both circumstances, the PWC criterion indicates that a plastic hinge bending mechanism leads to gross plastic deformation and is used as a parameter to identify the respective plastic loads. The results of the analyses also show that the PWC criterion leads to higher design loads for strain hardening structures than the TES criterion, as it takes account of the effect of strain hardening on the evolution of the gross plastic deformation mechanism
Design by analysis of ductile failure and buckling in torispherical pressure vessel heads
Thin shell torispherical pressure vessel heads are known to exhibit complex elastic-plastic deformation and buckling behaviour under static pressure. In pressure vessel Design by Analysis, the designer is required to assess both of these behaviour modes when specifying the allowable static load. The EN and ASME boiler and pressure vessel codes permit the use of inelastic analysis in design by analysis, known as the direct route in the EN Code. In this paper, plastic collapse or gross plastic deformation loads are evaluated for two sample torispherical heads by 2D and 3D FEA based on an elastic-perfectly plastic material model. Small and large deformation effects are considered in the 2D analyses and the effect of geometry and load perturbation are considered in the 3D analysis. The plastic load is determined by applying the ASME twice elastic slope criterion of plastic collapse and an alternative plastic criterion, the Plastic Work Curvature criterion. The formation of the gross plastic deformation mechanism in the models is considered in relation to the elastic-plastic buckling response of the vessels. It is concluded that in both cases, design is limited by formation of an axisymmetric gross plastic deformation in the knuckle of the vessels prior to formation of non-axisymmetric buckling modes
- âŠ