Oxygen reduction reaction features in neutral media on glassy carbon electrode functionalized by chemically prepared gold nanoparticles

Gold nanoparticles (AuNPs) were prepared by chemical route using 4 different protocols by varying reducer, stabilizing agent and solvent mixture. The obtained AuNPs were characterized by transmission electronic microscopy (TEM), UV-Visible and zeta potential measurements. From these latter surface charge densities were calculated to evidence the effect of the solvent mixture on AuNPs stability. The AuNPs were then deposited onto glassy carbon (GC) electrodes by drop-casting and the resulting deposits were characterized by cyclic voltammetry (CV) in H2SO4 and field emission gun scanning electron microscopy (FEG-SEM). The electrochemical kinetic parameters of the 4 different modified electrodes towards oxygen reduction reaction (ORR) in neutral NaCl-NaHCO3 media (0.15 M / 0.028 M, pH 7.4) were evaluated by rotating disk electrode voltammetry and subsequent Koutecky-Levich treatment. Contrary to what we previously obtained with electrodeposited AuNPs [Gotti et al., Electrochim. Acta 2014], the highest cathodic transfer coefficients were not obtained on the smallest particles, highlighting the influence of the stabilizing ligand together with the deposits morphology on the ORR kinetics

Seed-mediated atomic-scale reconstruction of silver manganate nanoplates for oxygen reduction towards high-energy aluminum-air flow batteries

Aluminum-air batteries are promising candidates for next-generation high-energy-density storage, but the inherent limitations hinder their practical use. Here, we show that silver nanoparticle-mediated silver manganate nanoplates are a highly active and chemically stable catalyst for oxygen reduction in alkaline media. By means of atomic-resolved transmission electron microscopy, we find that the formation of stripe patterns on the surface of a silver manganate nanoplate originates from the zigzag atomic arrangement of silver and manganese, creating a high concentration of dislocations in the crystal lattice. This structure can provide high electrical conductivity with low electrode resistance and abundant active sites for ion adsorption. The catalyst exhibits outstanding performance in a flow-based aluminum-air battery, demonstrating high gravimetric and volumetric energy densities of similar to 2552 Wh kg(Al)(-1) and similar to 6890 Wh I-Al(-1) at 100 mA cm(-2), as well as high stability during a mechanical recharging process

Enhanced electrolytic generation of oxygen gas at binary nickel oxide–cobalt oxide nanoparticle-modified electrodes

This study addresses the enhancement of the oxygen evolution reaction (OER) on glassy carbon, Au, and Pt electrodes modified with binary catalysts composed of nickel oxide nanoparticles (nano-NiOx) and cobalt oxide nanoparticles (nano-CoOx). Binary NiOx/CoOx-modified electrodes (with NiOx initially deposited) show a high catalytic activity and a marked stability which far exceeds that obtained at the individual oxide-modified electrodes. This enhancement is demonstrated by a marked negative shift (more than ca. 600 mV) in the onset potential of the OER compared to that obtained at the unmodified electrodes. The modified electrodes show a significantly higher long-term stability, over a period of 5 h of continuous electrolysis, without any significant loss of activity towards the OER in alkaline medium. The influence of the solution pH, the loading level, and sequence of deposition of each oxide on the electrocatalytic activity of the modified electrodes is addressed with an aim to maximize the catalytic activity of the modified electrodes towards the OER. SEM imaging is used to disclose the size and morphology of the fabricated nano-NiOx and nano-CoOx binary catalysts at the electrode surface

Probing the surface oxidation of chemically synthesised gold nanospheres and nanorods

In this study, the electrochemical behaviour of commercially available gold spheres and rods stabilised by carboxylic acid and cetyl trimethyl ammonium bromide (CTAB) moieties, respectively, are investigated. The cyclic voltammetric behaviour in acidic electrolyte is distinctly different with the nanorods exhibiting unusual oxidative behaviour due to an electrodissolution process. The nanospheres exhibited responses typical of a highly defective surface which significantly impacted on electrocatalytic activity. A repetitive potential cycling cleaning procedure was also investigated which did not improve the activity of the nanorods and resulted in deactivating the gold spheres due to decreasing the level of surface defects