Distributed monitoring and control of future power systems via grid computing

It is now widely accepted within the electrical power supply industry that future power systems operates with significantly larger numbers of small-scale highly dispersed generation units that use renewable energy sources and also reduce carbon dioxide emissions. In order to operate such future power systems securely and efficiently it will be necessary to monitor and control output levels and scheduling when connecting such generation to a power system especially when it is typically embedded at the distribution level. Traditional monitoring and control technology that is currently employed at the transmission level is highly centralized and not scalable to include such significant increases in distributed and embedded generation. However, this paper proposes and demonstrates the adoption of a relatively new technology 'grid computing' that can provide both a scalable and universally adoptable solution to the problems associated with the distributed monitoring and control of future power systems

Black Hole Emission in String Theory and the String Phase of Black Holes

String theory properly describes black-hole evaporation. The quantum string emission by Black Holes is computed. The black-hole temperature is the Hawking temperature in the semiclassical quantum field theory (QFT) regime and becomes the intrinsic string temperature, T_s, in the quantum (last stage) string regime. The QFT-Hawking temperature T_H is upper bounded by the string temperature T_S. The black hole emission spectrum is an incomplete gamma function of (T_H - T_S). For T_H << T_S, it yields the QFT-Hawking emission. For T_H \to T_S, it shows highly massive string states dominate the emission and undergo a typical string phase transition to a microscopic `minimal' black hole of mass M_{\min} or radius r_{\min} (inversely proportional to T_S) and string temperature T_S. The string back reaction effect (selfconsistent black hole solution of the semiclassical Einstein equations) is computed. Both, the QFT and string black hole regimes are well defined and bounded.The string `minimal' black hole has a life time tau_{min} simeq (k_B c)/(G hbar [T_S]^3). The semiclassical QFT black hole (of mass M and temperature T_H) and the string black hole (of mass M_{min} and temperature T_S) are mapped one into another by a `Dual' transform which links classical/QFT and quantum string regimes.Comment: LaTex, 22 pages, Lectures delivered at the Chalonge School, Nato ASI: Phase Transitions in the Early Universe: Theory and Observations. To appear in the Proceedings, Editors H. J. de Vega, I. Khalatnikov, N. Sanchez. (Kluwer Pub

Analysis of input-to-state stability for discrete time nonlinear systems via dynamic programming

The input-to-state stability (ISS) property for systems with disturbances has received considerable attention over the past decade or so, with many applications and characterizations reported in the literature. The main purpose of this paper is to present analysis results for ISS that utilize dynamic programming techniques to characterize minimal ISS gains and transient bounds. These characterizations naturally lead to computable necessary and sufficient conditions for ISS. Our results make a connection between ISS and optimization problems in nonlinear dissipative systems theory (including L2-gain analysis and nonlinear H∞ theory). As such, the results presented address an obvious gap in the literature. © 2005 Elsevier Ltd. All rights reserved

A unified approach to controller design for achieving ISS and related properties

A unified approach to the design of controllers achieving various specified input-to-state stability (ISS) like properties is presented. Both full state and measurement feedback cases are considered. Synthesis procedures based on dynamic programming are given using the recently developed results on controller synthesis to achieve uniform l∞ bound. Our results provide a link between the ISS literature and the nonlinear H∞ design literature. © 2005 IEEE

Crack propagation in brittle solid containing 3D surface fracture under uniaxial compression

2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Recurrent Fully Convolutional Neural Networks for Multi-slice MRI Cardiac Segmentation

In cardiac magnetic resonance imaging, fully-automatic segmentation of the heart enables precise structural and functional measurements to be taken, e.g. from short-axis MR images of the left-ventricle. In this work we propose a recurrent fully-convolutional network (RFCN) that learns image representations from the full stack of 2D slices and has the ability to leverage inter-slice spatial dependences through internal memory units. RFCN combines anatomical detection and segmentation into a single architecture that is trained end-to-end thus significantly reducing computational time, simplifying the segmentation pipeline, and potentially enabling real-time applications. We report on an investigation of RFCN using two datasets, including the publicly available MICCAI 2009 Challenge dataset. Comparisons have been carried out between fully convolutional networks and deep restricted Boltzmann machines, including a recurrent version that leverages inter-slice spatial correlation. Our studies suggest that RFCN produces state-of-the-art results and can substantially improve the delineation of contours near the apex of the heart.Comment: MICCAI Workshop RAMBO 201

Measurement feedback controller design to achieve input to state stability

An approach for design of measurement feedback controllers achieving input-to-state (ISS) stability properties is presented. A synthesis procedure based on dynamic programming is given. We make use of recently developed results on controller synthesis to achieve uniform l∞ bound [6]. Our results make an important connection between the ISS literature and nonlinear H∞ design methods

Grid computing technologies for renewable electricity generator monitoring and control

In this paper we discuss the use of real-time Grid computing for the monitoring, control and simulation of renewable electricity generators and their associated electrical networks. We discuss briefly the architectural design of GRIDCC and how we have integrated a number of real (solar, CHP) and simulated conventional power generators into the GRIDCC environment. A local weather station has also been attached to an Instrument Manager to alert experts appropriately when the Solar Array is not generating. The customised remote control and monitoring environment (a virtual control room), distributed using a standard web server, is discussed

Simple room-temperature preparation of high-yield large-area graphene oxide

Graphene has attracted much attention from researchers due to its interesting mechanical, electrochemical, and electronic properties. It has many potential applications such as polymer filler, sensor, energy conversion, and energy storage devices. Graphene-based nanocomposites are under an intense spotlight amongst researchers. A large amount of graphene is required for preparation of such samples. Lately, graphene-based materials have been the target for fundamental life science investigations. Despite graphene being a much sought-after raw material, the drawbacks in the preparation of graphene are that it is a challenge amongst researchers to produce this material in a scalable quantity and that there is a concern about its safety. Thus, a simple and efficient method for the preparation of graphene oxide (GO) is greatly desired to address these problems. In this work, one-pot chemical oxidation of graphite was carried out at room temperature for the preparation of large-area GO with ~100% conversion. This high-conversion preparation of large-area GO was achieved using a simplified Hummer’s method from large graphite flakes (an average flake size of 500 μm). It was found that a high degree of oxidation of graphite could be realized by stirring graphite in a mixture of acids and potassium permanganate, resulting in GO with large lateral dimension and area, which could reach up to 120 μm and ~8000 μm2, respectively. The simplified Hummer’s method provides a facile approach for the preparation of large-area GO

An investigation of particle breakage in loess

The paper presents a detailed experimental investigation of particle breakage in three kinds of loess, i.e., sandy loess, silty loess and clayey loess. It is firstly found that particle breakage can occur within loess in oedometer test, which results in a better-graded soil at the end of the test. Initial breakage stresses for both the silty and clayey loess are less than 0.5 MPa, and about 2 MPa for the sandy loess. The relative breakage (B ) is used to evaluate the particle breakage degree, and it is found that for all the three kinds of loess tested, B increases with the increasing loading stress until it reaches a threshold, after which B tends to keep a constant value. Particles within the loose specimens break more easily than those within the dense ones, especially for the sandy and silty loess. It is also observed that for the specimens reconstituted with previously tested soils, particle breakage degree decreases significantly, which means little particle breakage occurs in the pre-crushed specimens