175 research outputs found

    Characterization of the stimulation output of four devices for focal muscle vibration

    Get PDF
    Different devices for mechano-acoustic muscle vibration became available on the market in the last ten years. Although the use of these vibrators is increasing in research and clinical settings, the features of their stimulation output were never described in literature. In this study we aimed to quantify and compare the stimulation output of the four most widespread pneumatic devices for focal muscle vibration available on the market. A piezoelectric pressure sensor was used to measure the pressure profile generated by the four selected devices in the following experimental conditions: i) measurement of the output changes associated with variations of the stimulation amplitude for three stimulation frequencies (100 Hz, 200 Hz, and 300 Hz); ii) measurement of the output changes during a 20-min long stimulation at constant frequency (300 Hz) and amplitude; iii) measurement of the output changes associated with the progressive activation of all stimulation channels at constant frequency (200 Hz) for different amplitudes. The maximum peak-to-peak amplitudes of the pressure waves were in the range 102 mbar - 369 mbar (below the maximum values declared by the different manufacturers). The shape of the pressure waves generated by the four devices was quasi-sinusoidal and asymmetric with respect to the atmospheric pressure. All output features had a remarkable intra- and inter-device variability. Further studies are required to support the technological improvement of the currently available devices and to focus the issues of vibration effectiveness, limitations, proper protocols, modalities of its application and assessment in neuromuscular training and rehabilitation

    POINT MUTATIONS IN THE TYROSINE KINASE DOMAIN RELEASE THE ONCOGENIC AND METASTATIC POTENTIAL OF THE RON RECEPTOR

    Get PDF

    DXA-Based Detection of Low Muscle Mass Using the Total Body Muscularity Assessment Index (TB-MAXI): A New Index with Cutoff Values from the NHANES 1999–2004

    Get PDF
    The aims of this study were to investigate age-related changes in total body skeletal muscle mass (TBSMM) and the between-limb asymmetry in lean mass in a large sample of adults. Demographic, anthropometric, and DXA-derived data of National Health and Nutrition Examination Survey participants were considered. The sample included 10,014 participants of two ethnic groups (Caucasians and African Americans). The age-related decline of TBSMM absolute values was between 5% and 6% per decade in males and between 4.5% and 5.0% per decade in females. The adjustment of TBSMM for body surface area (TB-MAXI) showed that muscle mass peaked in the second decade and decreased progressively during the subsequent decades. The following thresholds were identified to distinguish between low and normal TB-MAXI: (i) 10.0 kg/m2 and 11.0 kg/m2 in Caucasian and African American females; and (ii) 12.5 kg/m2 and 14.5 kg/m2 in Caucasian and African American males. The lean asymmetry indices were higher for the lower limbs compared with the upper limbs and were higher for males compared with females. In conclusion, the present study proposes the TB-MAXI and lean asymmetry index, which can be used (and included in DXA reports) as clinically relevant markers for muscle amount and lean distribution

    Diagnostic performance of the Strength and Pain Assessment (SPA) score for non-contact muscle injury screening in male soccer players

    Get PDF
    Objectives: The aims of this study were to develop a clinical-feature based scoring system for muscle injury screening and to assess its diagnostic accuracy when large number of injuries are suspected. Methods: A prospective diagnostic accuracy study was performed according to the Standards for Reporting of Diagnostic Accuracy (STARD) criteria. The diagnostic accuracy of the Strength and Pain Assessment (SPA) score (index test) was assessed in relation to muscle ultrasonography (reference standard). A large (n = 175) number of male soccer players met the inclusion/exclusion criteria: clinical assessment (i.e., evaluation of pain onset modality, location, distribution, impact on performance, and manual muscle strength testing) and ultrasonography were performed in all players after 48 hours from the sudden or progressive onset of muscle pain during or after a soccer competition. Results: 91 of 175 cases (52%) were classified as functional muscle disorders, while signs of muscle tear were observed in the remaining 84 of 175 (48%) cases that were classified as structural muscle injuries. The median (1st–3rd quartile) value of the SPA score was significantly (P < 0.001) lower in the functional disorder group [9 (9–10)] compared to the structural injury group [12 (12–13)]. The area under the Receiver Operating Characteristic curve for different cutoff points of the SPA score was 0.977 (95% confidence intervals: 0.957–0.998) and the optimal cutoff value of the SPA score providing the greatest sensitivity and specificity (respectively, 99% and 89%) was 11. Conclusion: This study found that the SPA score has high diagnostic accuracy for structural muscle injuries and could be used as a valid screening tool in soccer players presenting with sudden or progressive onset of muscle pain during or after a competition

    Examination and evaluation of a coastal environment contamination at a formed shooting area.

    Get PDF
    In the recent past a very beautiful area along the interior coastal environment of Venice lagoon was used as a Clay Pigeon Shooting for a wide period. The sport of Clay Pigeon Shooting involves using a shotgun to shoot at and break a circular flying target made from a fragile material. It is released from a trap positioned in front of, or at the back of, a shooter; then, a typical target flight area characterizes each shooting site, where, in time, pellets (leadshot), shot cartridge, clay pigeon fragments and generic ammunition residues are found. So, in a brackish water contest soil/sediment treatment, waste removal and potential re-use are extremely delicate processes. The first step of our work was investigate if heavy metal (Pb, As and Sb) release and following leaching event occurred. Therefore, soil/sediment profiles in three hot sites of the target flight area has been performed and metal’s total and bioavailable fraction has been investigated. As well, grassy layer coating the sites and organisms living into has been picked, in order to verify a potential uptake and bioaccumulation

    The LuGRE project: a scientific opportunity to study GNSS signals at the Moon

    Get PDF
    The Lunar GNSS Receiver Experiment (LuGRE) is a joint NASA-Italian Space Agency (ASI) payload on the Firefly Blue Ghost Mission 1 with the goal to demonstrate GNSS-based positioning, navigation, and timing at the Moon. When launched, LuGRE will collect GPS and Galileo measurements in transit between Earth and the Moon, in lunar orbit, and on the lunar surface, and will conduct onboard and ground-based navigation experiments using the collected data. These investigations will be based on the observation of the data collected by a custom development performed by the company Qascom, based on the Qascom QN400-Space GNSS receiver. The receiver is able to provide, PVT solutions, the GNSS raw observables obtained by the real time operation, as well as snapshots of IF digital samples collected by the RF front-end at frequencies L1/E1 and L5/E5. These data will be the input for the different science investigations, that require then the development of proper analysis tools that will be the core of the ground segment during the mission. The current work done by the science team of NASA and ASI, which is supported by a research team at Politecnico di Torino, is planning the data acquisitions during the time windows dedicated to the LuGRE payload in the checkout, transit and surface mission phases

    Fludarabine, high-dose cytarabine and idarubicin-based induction may overcome the negative prognostic impact of flt3-itd in npm1 mutated aml, irrespectively of flt3-itd allelic Burden

    Get PDF
    The mutations of NPM1 and FLT3-ITD represent the most frequent genetic aberration in acute myeloid leukemia. Indeed, the presence of an NPM1 mutation reduces the negative prognostic impact of FLT3-ITD in patients treated with conventional \u201c3+7\u201d induction. However, little information is available on their prognostic role with intensified regimens. Here, we investigated the efficacy of a fludarabine, high-dose cytarabine and idarubicin induction (FLAI) in 149 consecutive fit AML patients (median age 52) carrying the NPM1 and/or FLT3-ITD mutation, treated from 2008 to 2018. One-hundred-and-twenty-nine patients achieved CR (86.6%). After a median follow up of 68 months, 3-year overall survival was 58.6%. Multivariate analysis disclosed that both NPM1mut (p < 0.05) and ELN 2017 risk score (p < 0.05) were significant predictors of survival. NPM1-mutated patients had a favorable outcome, with no significant differences between patients with or without concomitant FLT3-ITD (p = 0.372), irrespective of FLT3-ITD allelic burden. Moreover, in landmark analysis, performing allogeneic transplantation (HSCT) in first CR proved to be beneficial only in ELN 2017 high-risk patients. Our data indicate that FLAI exerts a strong anti-leukemic effect in younger AML patients with NPM1mut and question the role of HSCT in 1st CR in NPM1mut patients with concomitant FLT3-ITD
    • …
    corecore