Shear-free, Irrotational, Geodesic, Anisotropic Fluid Cosmologies

General relativistic anisotropic fluid models whose fluid flow lines form a shear-free, irrotational, geodesic timelike congruence are examined. These models are of Petrov type D, and are assumed to have zero heat flux and an anisotropic stress tensor that possesses two distinct non-zero eigenvalues. Some general results concerning the form of the metric and the stress-tensor for these models are established. Furthermore, if the energy density and the isotropic pressure, as measured by a comoving observer, satisfy an equation of state of the form $p = p(\mu)$, with $\frac{dp}{d\mu} \neq -\frac{1}{3}$, then these spacetimes admit a foliation by spacelike hypersurfaces of constant Ricci scalar. In addition, models for which both the energy density and the anisotropic pressures only depend on time are investigated; both spatially homogeneous and spatially inhomogeneous models are found. A classification of these models is undertaken. Also, a particular class of anisotropic fluid models which are simple generalizations of the homogeneous isotropic cosmological models is studied.Comment: 13 pages LaTe

The specialty choices of graduates from Brighton and Sussex Medical School: a longitudinal cohort study

BACKGROUND Since 2007 junior doctors in the UK have had to make major career decisions at a point when previously many had not yet chosen a specialty. This study examined when doctors in this new system make specialty choices, which factors influence choices, and whether doctors who choose a specialty they were interested in at medical school are more confident in their choice than those doctors whose interests change post-graduation. METHODS Two cohorts of students in their penultimate year at one medical school (n = 227/239) were asked which specialty interested them as a career. Two years later, 210/227 were sent a questionnaire measuring actual specialty chosen, confidence, influence of perceptions of the specialty and experiences on choice, satisfaction with medicine, personality, self-efficacy, and demographics. Medical school and post-graduation choices in the same category were deemed 'stable'. Predictors of stability, and of not having chosen a specialty, were calculated using bootstrapped logistic regression. Differences between specialties on questionnaire factors were analysed. RESULTS 50% responded (n = 105/277; 44% of the 239 Year 4 students). 65% specialty choices were 'stable'. Factors univariately associated with stability were specialty chosen, having enjoyed the specialty at medical school or since starting work, having first considered the specialty earlier. A regression found doctors who chose psychiatry were more likely to have changed choice than those who chose general practice. Confidence in the choice was not associated with stability. Those who chose general practice valued lifestyle factors. A psychiatry choice was associated with needing a job and using one's intellect to help others. The decision to choose surgical training tended to be made early. Not having applied for specialty training was associated with being lower on agreeableness and conscientiousness. CONCLUSION Medical school experiences are important in specialty choice but experiences post-graduation remain significant, particularly in some specialties (psychiatry in our sample). Career guidance is important at medical school and should be continued post-graduation, with senior clinicians supported in advising juniors. Careers advice in the first year post-graduation may be particularly important, especially for specialties which have difficulty recruiting or are poorly represented at medical school

An assessment of the torrefaction of North American pine and life cycle greenhouse gas emissions

Bioenergy is increasingly being used to meet EU objectives for renewable energy generation and reducing greenhouse gas (GHG) emissions. Problems with using biomass however include high moisture contents, lower calorific value and poor grindability when compared to fossil fuels. Torrefaction is a pre-treatment process that aims to address these issues. In this paper four torrefaction treatments of pine were performed and a mass-energy balance calculated. Using experimental data, a pellet production supply chain incorporating torrefaction was modelled and compared to an existing wood pellet system to determine life-cycle GHG emissions. Two utility fuels, wood chips and natural gas, were considered to provide process heat in addition to volatile gases released during torrefaction (torgas). Experimental results show that torrefaction reduces the moisture content and increases the calorific value of the fuels. Increasing torrefaction temperature and residence time results in lower mass and energy yields. GHG emissions reduce with increasing torrefaction severity. Emissions from drying &amp; torrefaction and shipping are the highest GHG contributors to the supply chain. All 4 torrefaction conditions assessed outperformed traditional wood pellet supply chain emissions but more land is required which increases with temperature and residence time. Sensitivity analysis results show that emissions increase significantly where natural gas is used for utility fuel and no torgas is utilised.</p

Mass fluxes and isofluxes of methane (CH4) at a New Hampshire fen measured by a continuous wave quantum cascade laser spectrometer

We have developed a mid‐infrared continuous‐wave quantum cascade laser direct‐absorption spectrometer (QCLS) capable of high frequency (≥1 Hz) measurements of 12CH4 and 13CH4 isotopologues of methane (CH4) with in situ 1‐s RMS image precision of 1.5 ‰ and Allan‐minimum precision of 0.2 ‰. We deployed this QCLS in a well‐studied New Hampshire fen to compare measurements of CH4 isoflux by eddy covariance (EC) to Keeling regressions of data from automated flux chamber sampling. Mean CH4 fluxes of 6.5 ± 0.7 mg CH4 m−2 hr−1 over two days of EC sampling in July, 2009 were indistinguishable from mean autochamber CH4 fluxes (6.6 ± 0.8 mgCH4 m−2 hr−1) over the same period. Mean image composition of emitted CH4 calculated using EC isoflux methods was −71 ± 8 ‰ (95% C.I.) while Keeling regressions of 332 chamber closing events over 8 days yielded a corresponding value of −64.5 ± 0.8 ‰. Ebullitive fluxes, representing ∼10% of total CH4 fluxes at this site, were on average 1.2 ‰ enriched in 13C compared to diffusive fluxes. CH4 isoflux time series have the potential to improve process‐based understanding of methanogenesis, fully characterize source isotopic distributions, and serve as additional constraints for both regional and global CH4 modeling analysis

Very long optical path-length from a compact multi-pass cell

The multiple-pass optical cell is an important tool for laser absorption spectroscopy and its many applications. For most practical applications, such as trace-gas detection, a compact and robust design is essential. Here we report an investigation into a multi-pass cell design based on a pair of cylindrical mirrors, with a particular focus on achieving very long optical paths. We demonstrate a path-length of 50.31 m in a cell with 40 mm diameter mirrors spaced 88.9 mm apart - a 3-fold increase over the previously reported longest path-length obtained with this type of cell configuration. We characterize the mechanical stability of the cell and describe the practical conditions necessary to achieve very long path-lengths

The type and impact of Evidence Review Group (ERG) exploratory analyses in the NICE Single Technology Appraisal (STA) process

Background: As part of the UK National Institute for Health and Care Excellence (NICE) single technology appraisal process, independent evidence review groups (ERGs) critically appraise a company's submission relating to a specific technology and indication. Objectives: To explore the type of additional exploratory analyses conducted by ERGs and their impact on the recommendations made by NICE. Methods: The 100 most recently completed single technology appraisals with published guidance were selected for inclusion. A content analysis of relevant documents was undertaken to identify and extract relevant data, and narrative synthesis was used to rationalize and present these data. Results: The types of exploratory analysis conducted in relation to companies' models were fixing errors, addressing violations, addressing matters of judgment, and the provision of a new, ERG-preferred base case. Ninety-three of the 100 ERG reports contained at least one of these analyses. The most frequently reported type of analysis in these 93 ERG reports related to the category Matters of judgment, which was reported in 83 reports (89%). At least one of the exploratory analyses conducted and reported by an ERG is mentioned in 97% of NICE appraisal consultation documents and 94% of NICE final appraisal determinations, and had a clear influence on recommendations in 72% of appraisal consultation documents and 47% of final appraisal determinations. Conclusions: These results suggest that the additional analyses undertaken by ERGs in the appraisal of company submissions are highly influential in the policy-making and decision-making process