848 research outputs found
Metal-polymer functionally graded materials for removing guided wave reflections at beam end boundaries
This paper investigates the potential of a metal-polymer functionally graded material (FGM) to remove beam end boundary wave reflections that produce complicated interference patterns in the response signals used for guided wave damage identification methodologies. The metal-polymer FGM matches the material properties to a metal beam for total wave transmission on one side and is continuously graded to a viscoelastic polymer on the other side. An Aluminium-Polycarbonate (Al-PC) FGM was fabricated and characterised using microscopy, hardness testing and through-transmission ultrasonics to verify the continuous gradient. Measurements of guided waves on an aluminium beam attached to the FGM on one end show reduction in boundary wave reflections that varies with wave frequency. A damaged aluminium beam attached with the FGM produced promising improvements in a damage identification system
Recommended from our members
Scaling studies and conceptual experiment designs for NGNP CFD assessment
The objective of this report is to document scaling studies and conceptual designs for flow and heat transfer experiments intended to assess CFD codes and their turbulence models proposed for application to prismatic NGNP concepts. The general approach of the project is to develop new benchmark experiments for assessment in parallel with CFD and coupled CFD/systems code calculations for the same geometry. Two aspects of the complex flow in an NGNP are being addressed: (1) flow and thermal mixing in the lower plenum ("hot streaking" issue) and (2) turbulence and resulting temperature distributions in reactor cooling channels ("hot channel" issue). Current prismatic NGNP concepts are being examined to identify their proposed flow conditions and geometries over the range from normal operation to decay heat removal in a pressurized cooldown. Approximate analyses have been applied to determine key non-dimensional parameters and their magnitudes over this operating range. For normal operation, the flow in the coolant channels can be considered to be dominant turbulent forced convection with slight transverse property variation. In a pressurized cooldown (LOFA) simulation, the flow quickly becomes laminar with some possible buoyancy influences. The flow in the lower plenum can locally be considered to be a situation of multiple hot jets into a confined crossflow -- with obstructions. Flow is expected to be turbulent with momentumdominated turbulent jets entering; buoyancy influences are estimated to be negligible in normal full power operation. Experiments are needed for the combined features of the lower plenum flows. Missing from the typical jet experiments available are interactions with nearby circular posts and with vertical posts in the vicinity of vertical walls - with near stagnant surroundings at one extreme and significant crossflow at the other. Two types of heat transfer experiments are being considered. One addresses the "hot channel" problem, if necessary. The second type will treat heated jets entering a model plenum. Unheated MIR (Matched-Index-of-Refraction) experiments are first steps when the geometry is complicated. One does not want to use a computational technique which will not even handle constant properties properly. The purpose of the fluid dynamics experiments is to develop benchmark databases for the assessment of CFD solutions of the momentum equations, scalar mixing and turbulence models for typical NGNP plenum geometries in the limiting case of negligible buoyancy and constant fluid properties. As indicated by the scaling studies, in normal full power operation of a typical NGNP conceptual design, buoyancy influences should be negligible in the lower plenum. The MIR experiment will simulate flow features of the paths of jets as they mix in flowing through the array of posts in a lower plenum en route to the single exit duct. Conceptual designs for such experiments are described
Recommended from our members
Initial Scaling Studies and Conceptual Thermal Fluids Experiments for the Prismatic NGNP Point Design
The objective of this report is to document the initial high temperature gas reactor scaling studies and conceptual experiment design for gas flow and heat transfer. The general approach of the project is to develop new benchmark experiments for assessment in parallel with CFD and coupled CFD/ATHENA/RELAP5-3D calculations for the same geometry. Two aspects of the complex flow in an NGNP are being addressed: (1) flow and thermal mixing in the lower plenum ("hot streaking" issue) and (2) turbulence and resulting temperature distributions in reactor cooling channels ("hot channel" issue). Current prismatic NGNP concepts are being examined to identify their proposed flow conditions and geometries over the range from normal operation to decay heat removal in a pressurized cooldown. Approximate analyses are being applied to determine key non-dimensional parameters and their magnitudes over this operating range. For normal operation, the flow in the coolant channels can be considered to be dominant forced convection with slight transverse property variation. The flow in the lower plenum can locally be considered to be a situation of multiple buoyant jets into a confined density-stratified crossflow -- with obstructions. Experiments are needed for the combined features of the lower plenum flows. Missing from the typical jet experiments are interactions with nearby circular posts and with vertical posts in the vicinity of vertical walls - with near stagnant surroundings at one extreme and significant crossflow at the other. Two heat transfer experiments are being considered. One addresses the "hot channel" problem, if necessary. The second experiment will treat heated jets entering a model plenum. Unheated MIR (Matched-Index-of-Refraction) experiments are first steps when the geometry is complicated. One does not want to use a computational technique which will not even handle constant properties properly. The MIR experiment will simulate flow features of the paths of jets as they mix in flowing through the array of posts in a lower plenum en route to the single exit duct. Initial conceptual designs for such experiments are described
Variability of postnatal ossification timing and evidence for a “dosage” effect
Although absolute variability in postnatal ossification timing is generally larger in boys than in girls, relative, conception-corrected variability is significantly larger in girls, suggestive of a “dosage” effect and consistent with the hypothesis of partial X-linkage. These findings, together with the excess of sister-sister over brother-brother timing similarities are inconsistent with the hypothesis of selective inactivation of either the paternal or the maternal X chromosome.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/37498/1/1330320116_ftp.pd
Relationship of skinfolds and muscle size to growth of children. I. Costa Rica
The relationships between triceps skinfolds and stature and between upper arm muscle size and stature were studied on 874 pairs matched for age derived from a cross-sectional sample of 2,445 Costa Rican rural subjects, aged 0 to 20 years. The results indicate that fatter children for their age, on the average, are not taller than their leaner counterparts. On the other hand, more muscular children, on the average, are taller than their less muscular counterparts of the same age.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/37511/1/1330350110_ftp.pd
Quality Improvement in Hospitals: Identifying and Understanding Behaviors
Improving operational performance in hospitals is complicated, particularly if process improvement requires complex behavioral changes. Using single-loop and double-loop learning theory as a foundation, the purpose of this research is to empirically uncover key improvement behaviors and the factors that may be associated with such behaviors in hospitals. A two-phased approach was taken to collect data regarding improvement behaviors and associated factors, and data analysis was conducted using methods proposed by grounded theorists. The contributions of this research are twofold. First, five key behaviors related to process improvement are identified, namely Quick Fixing, Initiating, Conforming, Expediting, and Enhancing. Second, based on these observed behaviors, a set of force field diagrams is developed to structure and organize possible factors that are important to consider when attempting to change improvement behaviors. This begins to fill the gap in the knowledge about what factors drive effective improvement efforts in hospital settings
Quality Improvement in Hospitals: Identifying and Understanding Behaviors
ABSTRACT Improving operational performance in hospitals is complicated, particularly if process improvement requires complex behavioral changes. Using single-loop and double-loop learning theory as a foundation, the purpose of this research is to empirically uncover key improvement behaviors and the factors that may be associated with such behaviors in hospitals. A two-phased approach was taken to collect data regarding improvement behaviors and associated factors, and data analysis was conducted using methods proposed by grounded theorists. The contributions of this research are twofold. First, five key behaviors related to process improvement are identified, namely Quick Fixing, Initiating, Conforming, Expediting, and Enhancing. Second, based on these observed behaviors, a set of force field diagrams is developed to structure and organize possible factors that are important to consider when attempting to change improvement behaviors. This begins to fill the gap in the knowledge about what factors drive effective improvement efforts in hospital settings
Raman Optical Activity Using Twisted Photons
Raman optical activity underpins a powerful vibrational spectroscopic technique for obtaining detailed structural information about chiral molecular species. The effect centers on the discriminatory interplay between the handedness of material chirality with that of circularly polarized light. Twisted light possessing an optical orbital angular momentum carries helical phase fronts that screw either clockwise or anticlockwise and, thus, possess a handedness that is completely distinct from the polarization. Here a novel form of Raman optical activity that is sensitive to the handedness of the incident twisted photons through a spin-orbit interaction of light is identified, representing a new chiroptical spectroscopic technique
Recommended from our members
Key Thermal Fluid Phenomena In Prismatic Gas-Cooled Reactors
Several types of gas-cooled nuclear reactors have been suggested as part of the international Generation IV initiative with the proposed NGNP (Next Generation Nuclear Plant) as one of the main concepts [MacDonald et al., 2003]. Meaningful studies for these designs will require accurate, reliable predictions of material temperatures to evaluate the material capabilities; these temperatures depend on the thermal convection in the core and in other important components. Some of these reactors feature complex geometries and wide ranges of temperatures, leading to significant variations of the gas thermodynamic and transport properties plus possible effects of buoyancy during normal and reduced power operations and loss-of-flow (LOFA) and loss-of-coolant scenarios. Potential issues identified to date include ''hot streaking'' in the lower plenum evolving from ''hot channels'' in prismatic cores. In order to predict thermal hydraulic behavior of proposed designs effectively and efficiently, it is useful to identify the dominant phenomena occurring
A new view of electrochemistry at highly oriented pyrolytic graphite
Major new insights on electrochemical processes at graphite electrodes are reported, following extensive investigations of two of the most studied redox couples, Fe(CN)64–/3– and Ru(NH3)63+/2+. Experiments have been carried out on five different grades of highly oriented pyrolytic graphite (HOPG) that vary in step-edge height and surface coverage. Significantly, the same electrochemical characteristic is observed on all surfaces, independent of surface quality: initial cyclic voltammetry (CV) is close to reversible on freshly cleaved surfaces (>400 measurements for Fe(CN)64–/3– and >100 for Ru(NH3)63+/2+), in marked contrast to previous studies that have found very slow electron transfer (ET) kinetics, with an interpretation that ET only occurs at step edges. Significantly, high spatial resolution electrochemical imaging with scanning electrochemical cell microscopy, on the highest quality mechanically cleaved HOPG, demonstrates definitively that the pristine basal surface supports fast ET, and that ET is not confined to step edges. However, the history of the HOPG surface strongly influences the electrochemical behavior. Thus, Fe(CN)64–/3– shows markedly diminished ET kinetics with either extended exposure of the HOPG surface to the ambient environment or repeated CV measurements. In situ atomic force microscopy (AFM) reveals that the deterioration in apparent ET kinetics is coupled with the deposition of material on the HOPG electrode, while conducting-AFM highlights that, after cleaving, the local surface conductivity of HOPG deteriorates significantly with time. These observations and new insights are not only important for graphite, but have significant implications for electrochemistry at related carbon materials such as graphene and carbon nanotubes
- …