393 research outputs found

    Performance of reactivated carbon nanotubes in adsorbing cadmium from aqueous solution

    Get PDF
    cadmium loaded carbon nanotubes (CNTs) for re-adsorption of the same metal cadmium (Cd). The desorption of cadmium ions (Cd2+) by batch mode laboratory experiments was investigated for hydrochloric and nitric acids, where the former gave better desorption compared to the other acid. Initial experiments revealed that hydrochloric acid (HCl) was better than nitric acid (HNO3)for the desorption of Cd2+ from the CNTs. Optimization study was conducted by design expert software using various molarities of HCl, which resulted in pH of 1.39 (0.1 M), pH 2.43 (0.01 M) and pH 3.53 (0.005 M). Contact time of 20, 50, 80, 110 and 140 minutes were used with fixed agitation of 200 rpm to study the effect of time on the desorption process. Statistical model was developed for the optimum desorption process, which provided a regression model with R2 value of 0.987. The desorbed CNTs were washed with deionized water to remove residual acids and then dried for re-adsorption process. The re-adsorption capacity of cadmium was also determined by batch mode experiments. This study revealed that pH and contact time influenced the desorption and re-adsorption capacity of the CNTs. The optimum condition for desorption was pH 1.39 (0.1 M) hydrochloric acid for 50 minutes agitation. This study also revealed that with this optimum condition, three (3) cycles of desorption process was necessary to remove all cadmium ion from the used CNTs. Re-adsorption capacity of the CNTs, after 3 cycles, was reduced from 8.28 mg/g to 4.23 mg/g. This indicated that about 50% of the adsorption capacity of the CNTs were destroyed or reduced due to the desorption process. Such reduction can also be linked to the destruction of the active sites of the CNT adsorbents

    Adsorption of lead from aqueous solution by a novel carbon based adsorbent

    Get PDF
    Lead (Pb), due to its bioaccumulation ability, has been noted to have detrimental effects on the human body affecting the metabolism, blood and kidneys (Bansal and Goyal, 2005; Bowen, 1996). It is, therefore, imperative that lead be removed from water and wastewater to protect public health and aquatic lives. Multiwall carbon nanotubes (MWCNT) were reported by Li et al. (2003) to have metal sorption capacity of 3–4 times higher than those of powder and granular activated carbon. However, membrane clogging and separation of the nanomaterials from the filtrate pose a challenge. In this work, a novel composite material consisting of carbon nanotubes (CNT) and granular activated carbon (GAC) was synthesised to solve the filtration problem in a static filter. Various percentages of nickel (1%, 3%, 5 and 7%) were used as substrate catalyst during production of the adsorbent and these were linked to the morphology and adsorption capacity of the novel material in lead adsorption. Analyses showed that increased nickel content in the substrate from 1% to 7%, during adsorbent production, resulted in a rough surface of the CNT and increased lead removal from 24% to 89%. Equilibrium concentrations of lead for the adsorbents were achieved at about 60 minutes of contact time. The novel composite material has the potential to remove toxic materials from water and bring benefit to the society
    corecore